HR triggers in GRC -not following any workflow

Hi Experts
We have successfully configured HR triggers in GRC system for various scenarios like new Hire ,Position change ,change Name etc . We can see triggers in GRC but here action is not creating request in other words itu2019s not following any workflow  .
Here we get following message
1586  CHANGEFNAME  E-HR DEV ENVIRONMENT  114  In process  The request has been created, waiting for approval.
Request no. : Trigger 1586 (Rule:CHANGEFNAME, Action:CHANGEFNAME) processed on 2/15/2012 12:00 AMResult : The action is not procesed yet.
Any suggestion / help is greatly appreciated . Thanks .
Regards
Aditya
Edited by: Adityatd on Feb 15, 2012 7:57 PM

Hi Ajesh
Sorry for the delayed response ..
Here I found Note 1641543 helpful considering our SP level and hence we were implementing this note and we got error saying it canu2019t be implemented so I have asked ABAP team to go for manual changes as itu2019s a programing error .. hope this will help us out will keep you posted .
Also our connectors  are working fine but I havenu2019t understood what do  you mean by connectors listed in HR Trigger --> Actions . Can you please explain .
Thanks
Aditya Thakurdesai

Similar Messages

  • Optus have unlocked their end but have a complicated way to unlock the phone. I can not follow , any help?

    Optus have unlocked their end but have advised acomplicated way to unlock the phone which I can not follow.Would appreciate any help

        Hello RTM58,
    I'm sorry you haven't heard back about your ticket. The representative that opened the ticket is notified when it is completed, but we can check the status for you now. Please feel free to send me a direct message after you accept my follow request and send me a request. You can also dial 800-922-0204 and review the ticket with a technician.
    AndreaS_VZW
    Follow us on Twitter @VZWSupport

  • Could not follow any document

    As in the title I couldn't follow any document or site. once I click follow button something like
    something went wrong
    Sorry, we couldn't follow the document.
    Technical Details
    Unexpected response from server. The status code of response is '500'. The status text of response is 'Internal Server Error'.
    this issue appear after i follow step from this site
    http://chadschroeder.blogspot.com/2011/01/unexpected-response-systemservicemodels.html
    the first issue was something like this
    Sorry, we couldn't follow the document.
    Technical Details
    Unexpected response from server. The status code of response is '500'. The status text of response is 'System.ServiceModel.ServiceActivationException'.
    could anyone help me to solve the issue..

    Can you share details from ULS log when you recreate the issue
    Is this is a migrated site.
    Was it ever working fine. if yes what changes were made
    Any customization done 
    http://sharepoint.stackexchange.com/questions/68100/news-feed-sharepoint-2013
    A hidden feature had to be activated on the site
    [Enable-SPFeature -Identity 6928B0E5-5707-46a1-AE16-D6E52522D52B -Url http://intranet/sites/TestNewsfeed]
    2. Add permissions for service account user to access user profile data
    Open Central Administration, then
    Manage Service Applications
    Highlight the User Profile service application link, but don’t click it link! Click on the whitepace with no text. Microsoft have made these links context aware!!
    In the “Sharing” group of the ribbon, click “Permissions”
    In this prompt, put in your service account that is running your Distributed Cache, and grant it full control.
    Last thing to consider is that performing this action may cause the User Profile Services web services to be restarted, if the farm is in use then perform steps after hours. 

  • What to do after Ipad is disabled and not recognize by Itunes. Can not follow any of the step to either syinc or restore.

    I am unable to use my Ipad because I forgot the password. I tried many times. It is disabled. I connect to the computer and Itunes does not open it. It says that I have to use a passbcode to be able to enter Itunes. Completely disabled. I tried all the instructions offered on line. But nothing is working.
    Please, any advise? Thank you!

    If your computer's iTunes is prompting you to enter the passcode on the iPad then try recovery mode, that should let you reset the iPad back to factory defaults - see half-way down this page : Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

  • When PO workflow is triggered i get the following mail to my inbox

    Hi Experts,
                     When PO workflow is triggered i get the following mail to my inbox
    Error processing following event linkage:
    BUS2012 RELEASESTEPCREATED WS90000001
    Following error occurred:
    SWF_RUN 594
    Message text:
    Import container contains errors (are any obligatory elements missing?)
    Event container appended as attachment.
    Event linkage not changed.
    Event stored temporarily.
    Events can be redelivered via event queue
    administration (transaction SWEQADM).
    Please suggest me how to correct this error.
    Regards,
    Dheepak

    Hi,
    This happen when the release code value is not passing in to the Event Container.
    Check the event Binding, Re-generate, Save & activate it.
    See this [Thread|workflow inbox level  given  message Error in event receiver .;.
    Regards,
    Surjith

  • I receive "WorkflowCannotStartWorkflow" erorr, though the Project Type is not associated to any workflow!

    Hello,
    I keep receiving an erorr mesaage says "WorkflowCannotStartWorkflow" though the Project Type is not associated to workflow!
    Following is an image of the erorr mesaage:
    Any advise please ??

    thanks indeed for your replay.
    i am not sure what part of the ULS log you may need, but i copied all of the rows that mentioned "WorkflowCannotStartWorkflow"
    Line 7282: 03/10/2015 09:08:53.34 Microsoft.Office.Project.Server (0x0718) 0x2CEC Project Server Project Server Workflow tjpu Medium Error is: WorkflowCannotStartWorkflow. Details: Attributes: ebc3a7e8-ebc6-e411-a767-005056842187 Microsoft.Office.Project.Server.BusinessLayer.QueueMsg.WorkflowStartWorkflowMessage 1 DontBlock . Standard Information: PSI Entry Point: Project User: i:0#.w|global\gerafia Correlation Id: e5c3a7e8-ebc6-e411-a767-005056842187 PWA Site URL: http://rdd.projects/PWA SA Name: Project Service Application PSError: WorkflowCannotStartWorkflow (35100), LogLevelManager Warning-ulsID:0x746A7075 has no entities explicitly specified. 9947f19c-a65a-803f-02b4-9b3da47dee50
    Line 7282: 03/10/2015 09:08:53.34 Microsoft.Office.Project.Server (0x0718) 0x2CEC Project Server Project Server Workflow tjpu Medium Error is: WorkflowCannotStartWorkflow. Details: Attributes: ebc3a7e8-ebc6-e411-a767-005056842187 Microsoft.Office.Project.Server.BusinessLayer.QueueMsg.WorkflowStartWorkflowMessage 1 DontBlock . Standard Information: PSI Entry Point: Project User: i:0#.w|global\gerafia Correlation Id: e5c3a7e8-ebc6-e411-a767-005056842187 PWA Site URL: http://rdd.projects/PWA SA Name: Project Service Application PSError: WorkflowCannotStartWorkflow (35100), LogLevelManager Warning-ulsID:0x746A7075 has no entities explicitly specified. 9947f19c-a65a-803f-02b4-9b3da47dee50
    Line 7283: 03/10/2015 09:08:53.34 Microsoft.Office.Project.Server (0x0718) 0x2CEC Project Server General b0ry Medium PWA:http://rdd.projects/PWA, ServiceApp:Project Service Application, User:i:0#.w|global\gerafia, PSI: [ProjectServerError] Mismatched Attributes for PSErrorID WorkflowCannotStartWorkflow. List of defined attributes: none. List of provided values: ebc3a7e8-ebc6-e411-a767-005056842187, Microsoft.Office.Project.Server.BusinessLayer.QueueMsg.WorkflowStartWorkflowMessage, 1, DontBlock., LogLevelManager Warning-ulsID:0x62307279 has no entities explicitly specified. 9947f19c-a65a-803f-02b4-9b3da47dee50
    Line 7305: 03/10/2015 09:08:54.35 Microsoft.Office.Project.Server (0x0718) 0x2CEC Project Server Queue Jobs ad3f2 Medium PWA:http://rdd.projects/PWA, ServiceApp:Project Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://rdd.projects/PWA: Group 36c4a7e8-ebc6-e411-a767-005056842187 correlation ebc3a7e8-ebc6-e411-a767-005056842187 type = WorkflowStartWorkflow failed at Message 1 Errors: WorkflowCannotStartWorkflow, GeneralQueueJobFailed, LogLevelManager Warning-ulsID:0x000DD15C has no entities explicitly specified. 9947f19c-a65a-803f-02b4-9b3da47dee50

  • Can not open any open any web pages. Receive the following error message (Error code: sec_error_library_failure)

    I can not open any websites using Mozilla browser. I have attached a screen shot of the error message that I receive. You will also find it below: .
    Secure Connection Failed
    An error occurred during a connection to www.google.com. security library failure. (Error code: sec_error_library_failure)
    The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
    Please contact the website owners to inform them of this problem.
    This error appears on all pages that I try to browse to. All other browsers work fine on my computer.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
    '''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
    * Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    '''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".
    ;[[Image:SafeMode-Fx35]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • SharePoint 2010: Scheduled Web Analytics Reports workflow is not sending ANY email

    Hello,
    I've a SharePoint 2010 Enterprise farm. I setup a Scheduled Web Analytics Reports workflow in a site collection with different web analytics reports options checked. So far I've not got ANY email. When I went to Site Workflows, I'm seeing that the workflow
    is running. When I click on Completed status, I see below outcome in the Workflow History section:
    "Email sent but reports with no data were not attached."
    And I see below information in the Workflow History list:
    "Attached are the daily Web Analytics reports for 1/7/2015 through 1/7/2015 for SharePoint Site Collection
    http://server/team/site scheduled by workflow "SharePoint Site Web Analytics Reports". "
    I am able to generate the reports manually by going to Site Collection Web Analytics Reports, but I want to schedule them. The problem is I'm not getting ANY email in my inbox. What am I missing here? Are the emails getting filtered by Outlook or workflow
    is not sending emails at all?
    Please help! This is getting frustrated.
    Thanks,
    Ashish

    Hi Ashish,
    Based on your description, my understanding is that the email is not sent from the Scheduled Web Analytics Reports workflow.
    I recommend to the things below:
    1. Check if the Outgoing email has been configured for the web application where you run the Scheduled Web Analytics Reports workflow.
    In Central Administration > Application management > Manage web applications > select the corresponding web application > click General Settings in the ribbon and select Outgoing E-mail.
    2. Make sure that your account has email address configured.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • I want to delete my icloud-account from my iphone 5 and then register again, because I want to change my email-address/account name. What would be the steps to follow? How do I make sure I do not lose any information stored on/in my iphone 5?

    I want to delete my icloud-account from my iphone 5 and then register again, because I want to change my email-address/account name. What would be the steps to follow? How do I make sure I do not lose any information stored on/in my iphone 5?

    You would have to delete the existing iCloud account and create a wholly new one - you cannot change the @icloud.com email address of the one you already have.  To make a new one, you will also need an new AppleID as any AppleID can only have one iCloud account associated with it.
    Deleting the account will not delete anything off your device (if prompted for things like contacts, choose to keep them).  You will have to sync everything anew with the new account as you cannot move your sync'd content, your old backups or anything else from one iCloud account to another.  You will have to set up sync again and let it sync to the new account, and then make new backups to the new account as well.

  • HT1751 Hi I followed the istructions to copy/move iTunes music to a new PC, can see albums listed in Library, but SYNCH does not put any music on iPod. It took me three weeks to import my CDs into iTunes and i DON'T want to do it again! Can anyone help ?

    Hi I followed instructions to copy/move iTunes music to a new PC. I can see albums listed in the library but SYNCH will not put any music on my new iPod.
    It took three weeks to import my CDs on the old PC and I don't want to do it again!
    Can anyone help ?

    Take a look here; it should help:
    iTunes for Mac: How to copy purchases between authorized computers
    Though it refers to items purchased from the iTunes Store, it applies to all your iTunes content. And if you happen to also own an iPod:
    How to use your iPod to move your music to a new computer
    Once you have the tracks on some removable medium, you can mount that on your new computer and then just drag the content to the iTunes window. Make sure that the option to "copy files to iTunes Music folder when adding to library" is set in the iTunes -> Advanced -> General preferences before you do. Alternatively, you can use the Add To Library command and select each track (or folder of tracks).
    If you won't be using that Windows system once you move the content, don't forget to deauthorize the system from your iTunes Store account before you dispose of the computer.
    Regards.
    Message was edited by: Dave Sawyer

  • When trying to download the latest version of iTunes, I receive the following error "Apple Application Support was not found", any suggestions?

    When trying to download the latest version of iTunes, I receive the following error "Apple Application Support was not found", any suggestions?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
    tt2

  • TS1702 I have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2.  I can get no further as a report code keeps appearing saying too many http redirects so I can not get any furthe

    I have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2.  I can get no further as a report code keeps appearing saying too many http redirects so I can not get any further.
    I have also sent 3 emails to the company if Smart Office 2 with no response.
    How do I report my dissatisfaction which is growing with the frustration of not being able to contact any one!
    Zena Parton

    I have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2.  I can get no further as a report code keeps appearing saying too many http redirects so I can not get any further.
    I have also sent 3 emails to the company if Smart Office 2 with no response.
    How do I report my dissatisfaction which is growing with the frustration of not being able to contact any one!
    Zena Parton

  • HT3702 My bank was charge me the following amount of USD 1. But i do not have any purchase of USD1. Please check and refund.

    My bank was charged me the following amount of USD 1. But i do not have any purchase of USD1. Please check and refund.

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
    The HT3702 page that you posted from tells you what it is :
    As with many other merchants, the iTunes Store and Mac App Store places an authorization hold on your payment card account for the approximate amount of any purchase you make. If you update your billing information, the iTunes Store or Mac App Store will place an authorization hold on your payment card account, usually in the amount of 1 USD or the local currency equivalent, to verify your account information.
    Authorization holds are removed by your financial institution shortly after your purchase clears. The time it takes to remove authorization requests varies by financial institution.

  • WorkFlow Error -Strategy RR_MANAGER did not determine any approver

    Dear ,my expert:
    I work in SRM7.0 .SRM extended classic scenario.I want to use the contract one-step approve workflow and active it .
    one-step approve :/SAPSRM/C_CT_600_001_SP04
      And I set the manager in the ORG. Plan
    After I releasing one contract ,I get one red message in the Processor "Strategy RR_MANAGER did not determine any approver  "
    So ,What is the problem ? Your reply will be useful to me !
      BestRegards!
      Alex!

    Hi,
      What happen when you run the FM 'RH_GET_LEADING_POSITION' IN se37 dirrectly.. check the OSS note 1363088 if your SP level is below 5..
    Saravanan

  • GRC AC 10- ARA Risk violation does not show any thing

    Hi Expert,
    GRC AC 10.0 SP14
    Steps to reproduce error
    Reports and Analytic -> Risk violations. The dialog opens up but does not show any thing. Please see the attachment for your information
    We have installed Abode flash player already.
    Any suggestion will be of great help.
    Thanks,
    Kailsh

    Hi Kailash,
    Does this issue occur with other dashboard reports too or only with risk violations?
    Also, can you check if the batch risk analysis has been successfully completed?
    Thanks
    Sammukh

Maybe you are looking for