Href value not getting updated in UMS adapter payload
Hi all,
I am not getting the Href reference in UMS adapter payload. PFB the payload description.
In that we can see the From address of the mail but noe the Href values.
<ReceiveMail_InputVariable>
<part name="body">
<ns0:message>"abc xyz" <[email protected]></ns0:message>
</part>
</ReceiveMail_InputVariable>
Please help me in this. What could be the reason for this ?
Thanks in Advance
Divyanshu Agarwal
Hi all,
I am not getting the Href reference in UMS adapter payload. PFB the payload description.
In that we can see the From address of the mail but noe the Href values.
<ReceiveMail_InputVariable>
<part name="body">
<ns0:message>"abc xyz" <[email protected]></ns0:message>
</part>
</ReceiveMail_InputVariable>
Please help me in this. What could be the reason for this ?
Thanks in Advance
Divyanshu Agarwal
Similar Messages
-
Open Sales Order values not getting updated after run RVKRED77 & RVKRED88
Hiiii,
In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
Best Regards,
Sridhar . PDear Heagal,
I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
2. Removed Credit groups for Delivery Type.
3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
Best Regards,
Sridhar -
Consumption values not getting updated on the material mastere
HI Gurus,
can anbody please explain me the reason why the consumption values not getting updated on the material master. What kind of movements qualify to get updated on the material master? is it 261, 101, 701 and 702 etc only? or any movement that means issues, receipts etc? I just happened to see a few materials which had some movements occur in the past but they did not get updated on the material master. These materials used to have ND MRP type until recently and these were changed to VM few days agao. could this be a reason? Please throw some ligjht on this. Helpful replies will be appreciated
Thanks
AnushgaDear ,
Use tcode - OMJJ and then do the following setting -
for movement - 261,262, 201 and 202
Statistically relev. - 2
Consumption posting - R
for movement - 701 and 702
Statistically relev. - 2
Abhinay
Edited by: Abhinay Sachan on Sep 10, 2010 1:38 PM -
Values not getting updated in table mvke
Hi,
I am working on a module pool program.In the o/p screen there are many records.If the user wants to change the field values of a particular record,he clicks on the checkbox besides that record and when he click on the change button,control goes to update screen.In this screen when the user changes the value of one particular field and click on the checkbox beside and then click on the execute button,the changed value of that field should get updated in that particular record in the database table.Here I want to update mvke and marc tables.
I have used FM BAPI_MATERIAL_SAVEDATA to update the database tables.
Only marc table is getting updated with changed values.mvke table is not getting updated.What would be the reason for this.
I am sending a part of my code.Please check it.
form move_mat_data .
*Header
gt_bapi_head-material = gs_output1-matnr.
gt_bapi_head-ind_sector = gs_output1-mbrsh.
gt_bapi_head-matl_type = gs_output1-mtart.
gt_bapi_head-basic_view = 'X'.
gt_bapi_head-purchase_view = 'X'.
gt_bapi_head-account_view = 'X'.
gt_bapi_head-sales_view = 'X'.
*Client
gt_bapi_client-matl_group = gs_output1-matkl.
gt_bapi_client-base_uom = gs_output1-meins.
gt_bapi_clientx-matl_group = 'X'.
gt_bapi_clientx-base_uom = 'X'.
*Plant
gt_bapi_marc1-plant = gs_output1-werks.
gt_bapi_marc1-pur_status = gs_output1-mmsta.
gt_bapi_marc1-mrp_type = gs_output1-dismm.
gt_bapi_marc1-mrp_ctrler = gs_output1-dispo.
gt_bapi_marc1-serv_level = gs_output1-zserclass.
gt_bapi_marc1-availcheck = gs_output1-mtvfp.
gt_bapi_marcx-plant = gs_output1-werks .
gt_bapi_marcx-pur_status = 'X'.
gt_bapi_marcx-mrp_type = 'X'.
gt_bapi_marcx-mrp_ctrler = 'X'.
gt_bapi_marcx-serv_level = 'X'.
gt_bapi_marcx-availcheck = 'X'.
Material Description
REFRESH gt_materialdesc.
gt_materialdesc-langu = gs_output1-spras.
gt_materialdesc-matl_desc = gs_output1-maktx.
append gt_materialdesc.
*Sales
gt_bapi_mvke1-sales_org = gs_output1-vkorg.
gt_bapi_mvke1-distr_chan = gs_output1-vtweg.
gt_bapi_mvke1-sal_status = gs_output1-vmsta.
gt_bapi_mvke1-valid_from = gs_output1-vmstd.
gt_bapi_mvkex-sales_org = 'X'.
gt_bapi_mvkex-distr_chan = 'X'.
gt_bapi_mvkex-sal_status = 'X'.
gt_bapi_mvkex-valid_from = 'X'.
endform. " move_mat_dataHello Hema,
Find the fields which you need to populate with values:
As an example i'm trying to update DISPO from MARC and VKORG from MVKE.
No need to fill clientdata and clienddatax.
* Header data
MOVE g_wa_mat_out-s_matnr TO g_r_headdata-material.
MOVE 'X' TO g_r_headdata-mrp_view.
* Plant data
MOVE g_wa_mat_out-t_werks TO: g_r_plantdata-plant,
g_r_plantdatax-plant.
MOVE g_wa_mat_out-t_dispo_new TO g_r_plantdata-mrp_ctrler.
MOVE 'X' TO g_r_plantdatax-mrp_ctrler.
MOVE g_wa_mat_out-t_vkorg_new TO g_r_salesdata-sales_org.
MOVE 'X' TO g_r_salesdatax-sales_org.
Reward If Helpful.
Regards
Sasidhar Reddy Matli.
Edited by: Sasidhar Reddy Matli on Feb 7, 2008 11:49 AM -
Field value not getting updated in R/3
Hello Experts!!
I am facing a problem while updating a field value back in R/3.
The Syncbo is of type U01 and the field has data type char 40.
The meRepMeta.XML file has following description
Field name="DESCR1" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="modify">false</Input>
1) when i test the function module in R/3. The field value is gets updated.
2) when i create a record for the sync BO from client , i can see the field value being created on the client.
3) when i synchronize, i dont get any error or warning and get a successful message.
S 15.07.2008 12:19:09 All updates for one TOP block were successful (seq. no.=65, TOP cntr.=0000000001)
15.07.2008 12:19:09 Synchronizer UPLOADER completed successfully (mobile ID=0000002646, SyncBO=ZDBMSERORD)
I am not able to locate where is the problem
Please suggest!!
Regards,
Priya GhoshHi,
please check your maping in the create handler in MEREP_SBUILDER. Perhaps the value is created on the client but not mapped to the field of the function module. Furthermore have a look into MEREP_MON and see if the data gets forwarded in there.
At last I would dump the information received by the function module into a table without any logic. So you can see what data actually is forwarded into the funct module - if brake point i not possible.
Hope this helps.
Regards,
Oliver -
Time stamp is not getting updated for File Adapter in communication channel
Hi All,
Since yesterday, I am observing that the time stamp of communication channel for File adapter is not gettingupdated some times.
I had to stop and start the communication channel to update the time stamp.Please let me know if anyone has come across such issue or any useful notes on this.I could not find any related notes on Market place.
Regards,
DinakarHi,
This is happening only with one communication channel which is sender in derection.Any reason why it is happening like this?since the restart of the communication channel it is getting update now.I really do not know how to delete/create the communication channels as this was done our PI consultants.Pls guide me.
Regards,
Dinakar -
Values not getting updated in Classification tab by BAPI_BATCH_SAVE_REPLICA
Hello Experts ,
I am currently facinmg problem with value updation in Classification Tab for Batch Master. To create the classification I have marked BATCHCONTROLFIELDS-DOCLASSIFY = 'X' and to pass values to classification I have done the below coding.
wa_classvaluationschar-value_char = wa_itab-value1.
APPEND wa_classvaluationschar TO it_classvaluationschar.
wa_classvaluationsnum-value_from = wa_itab-value1.
wa_classvaluationsnum-unit_from = wa_itab-meins.
APPEND wa_classvaluationsnum TO it_classvaluationsnum.
Finally called the FM 'BAPI_BATCH_SAVE_REPLICA'. But , inspite of this I am not able to see values in the created Batch. Please advice on the same.
Thanks
-Trishna.Hi Trishna,
You need to update below mentioned fields to udpate that.
OBJECTKEY = concatenate (Internal Material number & plant & batch number)
OBJECTTABLE = MCHA
in both the structures CLASSALLOCATIONS and CLASSVALUATIONSCHAR. It will udpate.
Cheers,
Luri -
544 Movement ,Qty & value is not getting updated in MC.9
Dear friends,
MC.9 & MB5b report is showing difference in Qty & Value.In my analysis i came to know that 544 movement is not getting updated in MC.9. I also Checked the Statistically relev. key as 2 and Consumption posting G in OMJJ.
I require the info about MC.9 configuration or any info related to this.Hi,
Please refer SAP note 581240 for this.
For these stocks you have three valuation types for selection:
' ' = no inventory valuation
'A' valuation = without reference to sales document ('make-to-stock
inventory')
'M' = separate valuation with reference to the sales and distribution
document/project
ONLY stock/stock movements with special stock valuation 'A'
(make-to-stock inventory) are updated in Inventory Controlling.
Thus, if you find a document which is not updated in the info structures
of Inventory Controlling (S031-S039) and you require this, check the
corresponding documents in the materials management tables. You can find
the special stock indicator and indicator of the valuation of the
special stock, for example, in document segment table MSEG in the
following fields:
MSEG-SOBKZ = Special Stock Indicator
MSEG-KZBWS = Indicator: Special Stock Valuation
Only A type (make to stock ) are updated in the info structures.
Hoping this helps.
Regards,
Rajesh. -
InputText value is not getting updated in Iterator
Hi All,
We are using jdeveloper 11.1.1.5.
I have having 2 bounded taskflows TF1 and TF2. In TF1 I am having Page1.jspx and in
TF 2 I have Page2.jspx.
I am having 1 page fragment Frag1.jsff inside that I am having 1 textbox and a button. Text box is binded to the iterator "iter1".
In Page1.jspx I have added fragment as a region and also I have added the iterator "iter1" in the bindings of page1.jspx
On page load I am getting the value in the text box after that I am updating the text
box value and on click of button I am trying to get the text box value using
following methods.
(1) Finding the Iterator getting the row and then finding the value as
Row.getAttribute("Name");
DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("IName of the Iterator");
Row row = dciter.getRowAtRangeIndex(0);
row.getAttribute("Name of the attribute);
(2) Finding the RichSelectOneChoice component and then getting value
RichSelectOneChoice textbox= jsfUtils.findComponentInRoot("ID of the component");
textbox.getValue();
(3) Using the page definition attribute as :-
+jsfUtils.resolveExpression("#{data.PageDefName.inputtextname.inputValue}");+
Every time I am getting null value. Is there anything I am missing here.
When I applied autosubmit="true" property on the textbox I am getting value from the
1st method.
*Question 1 : - Is it necessary to use autosubmit property on the text box for the values to get updated in Iterator ?*
*Question 2 : - Why I am not able to find the value using 2nd method ?*
*Question 3 : - Is there anything wrong in getting value from page definition using 3rd method?*
Now When on click on button on page1 on some condition, I am navigating it to page2
and there is a button on page2 which invokes the TaskFlow return activity and so
returning back to TF1.
Now again I am clicking on the button on page1 but this time again I am getting value
of the textbox as null using all the methods :(
I have checked various post and tried putting *changeEvent="ppr"* in ur pageDef
against the respective VO entry but still after returning back from TF2 to TF1 values
are lost in the Iterator.
I tried sharing data control with calling taskflow but still I am not getting the
updated values.
Please suggest.
Thanks in advance.
--NavinKHi Suresh,
I already have autoSubmit=true for input text and partialSubmit=true for button but still getting the same error.
--Navin K -
Stock value is not getting updated in APO system From ECC automatically
Hi All,
Stock value is not getting updated in APO system From ECC automatically but if we do it manually from transaction CFM2 it will get updated.
for this we are using EXIT_SAPLCSTK_001.
I am using VL10A for delivery and VL06G for PGI
I have also checked integration model for material and stock.
Please help me out as it is very urgent.
Thanks,
Gaurav Mittal
Edited by: GAURAV MITTAL on Feb 6, 2008 6:09 PMHi,
for transferring the stock data from R/3 to APO automatically, you need to have the integration model for material and stock activated.
please check the same.
if this does not help, let me know in detail the steps which you are following..
Ram -
Values are not getting updated in sales report
I have configured sales information system, and i have been trying to run sales report but values are not getting updated in sales report, System will through message that no data exists.
regards,
thooyavanHi,
Please check with the Customer and Material Statistics group in the Customer and material master respectively.
Further check with the LIS settings (Sales Area combination with the Update group).
Reward points if this helps you.
Regards,
Harsh -
Values are not getting updated in 'stocks App' in my i4 phone. What is the solution?
values are not getting updated in 'stocks App' in my i4 phone. What is the solution?
you have encountered activation lock. Read iCloud: Activation Lock
-
CRMXIF_ORDER_SAVE: Condition values do not get updated
Hi,
I am trying to change the value of a condition record on a contract using APPL_IDOC_INPUTM (IDOC Type APPL_IDOC_INPUTM; Message Type CRMXIF_ORDER_SAVE_M; Function CRMXIF_ORDER_SAVE). I pass 'U' to the Object_task and populate the new rate in the condition table E101CRMXIF_BT_PRCD_COND. I set the values for the corresponding E101CRMXIF_BT_PRCD_COND_F and E101CRMXIF_PRCD_COND_XT tables too. However, the pricing condition does not get updated on the contract.
Anyone worked on this before and knows the reason or what am I missing?
Thanks
PrayarnaHey,
Did you solved this? can you please let me know how did you do this?
Regadrs,
Sarath. J -
Adapter Engine Cache not getting Updated
Hello Everyone,
My adapter engine Cache is not getting updated in my development server,
PFA... file for the error description after i refresh my Full ID cache from Administration tab
Regards,
SushantHi Sushant,
Please check the RFC destination "INTEGRATION_DIRECTORY_HMI" is working or not?
Check the parameters as suggested by others for this destination type.
Check the USER which is mentioned for this RFC destination is locked or not? if so please unlock it.
Try to change the pwd for this user and try again..
IF none of them are working please refer this notes 764176
Regards
Bhargava Krishna -
KINAK field in Table KONV not getting updated with value W
Hi,
I have a PO where I am deleting a line item.
After I delet line item the field KINAK in table KONV gets updated with value W.
But I am getting instance where in some cases the field KINAK is not getting updated.
The result is deleted line item is getting populated in PO output also.
Regards
NandiiniKINAK is updated only when a Condition is inactive ! So when a item is deleted the condition becomes inactive and gets updated with 'W' which means statistical(not to be counted)
A Condition exclusion item
K Inactive due to calculation basis/shipping material type
L Condition exclusion header or inactive at header level
M Inactive due to manual entry
T Inactive at header level
W The document item is statistical
X Inactive via formulae of incorrect
X Inactive via formulae of incorrect
Y Inactive because of subsequent price
Maybe you are looking for
-
How do you move many "Folders" from one Catalog to "one" other Catalog?
When I first start using LR, I did not know anything about catalog. After 5000 photos, everything is in the Lightroom Catalog.Ircat (by the way, what does Ir stand for?) Some photos are done in the office (work related for PowerPoint). Many others ar
-
Sync deletes contacts on the iPhone
I am a fairly well-experienced Apple user but cannot - for the life of me - figure out why contacts I put into my iPhone 4 get wiped out when I perform a sync. Even my own name has been randomly removed in past syncs. So, let's assume that the follow
-
V51VP - item was not found - process cancelled
I get the above idoc error from a PGI confirmation message. Can any one help with what this actually mean?
-
Sub-pages opening in new windows
I have all my links and pages opening in the same tab, but one of my sub-pages opens in a new tab and I cannot find out why. Any suggestions would be greatly appreciated. Thanks
-
How do I insert Fireworks Slideshow (non flash) into Dreamweaver?
I have been trying to import a slideshow from flash that I created from the built in template. I used the player that does not require a flash plug in and I cannot figure out how to insert it into my webpage in Dreamweaver. When I post the code direc