Field value not getting updated in R/3

Hello Experts!!
I am facing a problem while updating a field value back in R/3.
The Syncbo is of type U01 and the field has data type char 40.
The meRepMeta.XML file has following description
Field name="DESCR1" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="modify">false</Input>
1) when i test the function module in R/3. The field value is gets updated.
2) when i create a record for the sync BO from client , i can see the field value being created on the client.
3) when i synchronize, i dont get any error or warning and get a successful message.
S 15.07.2008 12:19:09 All updates for one TOP block were successful (seq. no.=65, TOP cntr.=0000000001)
15.07.2008 12:19:09 Synchronizer UPLOADER completed successfully (mobile ID=0000002646, SyncBO=ZDBMSERORD)
I am not able to locate where is the problem
Please suggest!!
Regards,
Priya Ghosh

Hi,
please check your maping in the create handler in MEREP_SBUILDER. Perhaps the value is created on the client but not mapped to the field of the function module. Furthermore have a look into MEREP_MON and see if the data gets forwarded in there.
At last I would dump the information received by the function module into a table without any logic. So you can see what data actually is forwarded into the funct module - if brake point i not possible.
Hope this helps.
Regards,
Oliver

Similar Messages

Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

Hiiii,
In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
Best Regards,
Sridhar . P

Dear Heagal,
I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
2. Removed Credit groups for Delivery Type.
3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
Best Regards,
Sridhar

Consumption values not getting updated on the material mastere

HI Gurus,
can anbody please explain me the reason why the consumption values not getting updated on the material master. What kind of movements qualify to get updated on the material master? is it 261, 101, 701 and 702 etc only? or any movement that means issues, receipts etc? I just happened to see a few materials which had some movements occur in the past but they did not get updated on the material master. These materials used to have ND MRP type until recently and these were changed to VM few days agao. could this be a reason? Please throw some ligjht on this. Helpful replies will be appreciated
Thanks
Anushga

Dear ,
Use tcode - OMJJ and then do the following setting -
for movement - 261,262, 201 and 202
Statistically relev. - 2
Consumption posting - R
for movement - 701 and 702
Statistically relev. - 2
Abhinay
Edited by: Abhinay Sachan on Sep 10, 2010 1:38 PM

Values not getting updated in table mvke

Hi,
I am working on a module pool program.In the o/p screen there are many records.If the user wants to change the field values of a particular record,he clicks on the checkbox besides that record and when he click on the change button,control goes to update screen.In this screen when the user changes the value of one particular field and click on the checkbox beside and then click on the execute button,the changed value of that field should get updated in that particular record in the database table.Here I want to update mvke and marc tables.
I have used FM BAPI_MATERIAL_SAVEDATA to update the database tables.
Only marc table is getting updated with changed values.mvke table is not getting updated.What would be the reason for this.
I am sending a part of my code.Please check it.
form move_mat_data .
*Header
gt_bapi_head-material = gs_output1-matnr.
gt_bapi_head-ind_sector = gs_output1-mbrsh.
gt_bapi_head-matl_type = gs_output1-mtart.
gt_bapi_head-basic_view = 'X'.
gt_bapi_head-purchase_view = 'X'.
gt_bapi_head-account_view = 'X'.
gt_bapi_head-sales_view = 'X'.
*Client
gt_bapi_client-matl_group = gs_output1-matkl.
gt_bapi_client-base_uom = gs_output1-meins.
gt_bapi_clientx-matl_group = 'X'.
gt_bapi_clientx-base_uom = 'X'.
*Plant
gt_bapi_marc1-plant = gs_output1-werks.
gt_bapi_marc1-pur_status = gs_output1-mmsta.
gt_bapi_marc1-mrp_type = gs_output1-dismm.
gt_bapi_marc1-mrp_ctrler = gs_output1-dispo.
gt_bapi_marc1-serv_level = gs_output1-zserclass.
gt_bapi_marc1-availcheck = gs_output1-mtvfp.
gt_bapi_marcx-plant = gs_output1-werks .
gt_bapi_marcx-pur_status = 'X'.
gt_bapi_marcx-mrp_type = 'X'.
gt_bapi_marcx-mrp_ctrler = 'X'.
gt_bapi_marcx-serv_level = 'X'.
gt_bapi_marcx-availcheck = 'X'.
Material Description
REFRESH gt_materialdesc.
gt_materialdesc-langu = gs_output1-spras.
gt_materialdesc-matl_desc = gs_output1-maktx.
append gt_materialdesc.
*Sales
gt_bapi_mvke1-sales_org = gs_output1-vkorg.
gt_bapi_mvke1-distr_chan = gs_output1-vtweg.
gt_bapi_mvke1-sal_status = gs_output1-vmsta.
gt_bapi_mvke1-valid_from = gs_output1-vmstd.
gt_bapi_mvkex-sales_org = 'X'.
gt_bapi_mvkex-distr_chan = 'X'.
gt_bapi_mvkex-sal_status = 'X'.
gt_bapi_mvkex-valid_from = 'X'.
endform. " move_mat_data

Hello Hema,
Find the fields which you need to populate with values:
As an example i'm trying to update DISPO from MARC and VKORG from MVKE.
No need to fill clientdata and clienddatax.
* Header data
      MOVE g_wa_mat_out-s_matnr TO g_r_headdata-material.
      MOVE 'X' TO g_r_headdata-mrp_view.
* Plant data
      MOVE g_wa_mat_out-t_werks TO: g_r_plantdata-plant,
                                    g_r_plantdatax-plant.
          MOVE g_wa_mat_out-t_dispo_new TO g_r_plantdata-mrp_ctrler.
          MOVE 'X' TO g_r_plantdatax-mrp_ctrler.
          MOVE g_wa_mat_out-t_vkorg_new TO g_r_salesdata-sales_org.
          MOVE 'X' TO g_r_salesdatax-sales_org.
Reward If Helpful.
Regards
Sasidhar Reddy Matli.
Edited by: Sasidhar Reddy Matli on Feb 7, 2008 11:49 AM

Date and time fields are not getting updated in database

Hi,
I am Using the bapi SD_SHIPMENT_HEADER_CHANGE in my program ...
I am using bapi_shipemnt_create for creating shipment document but, trying to enter the date fileds using this bapi .
can anybody please tell me how shud i pass this variables exactly ...
i tried giving test data and checked this bapi .. the result in changing parameters is also appearing but in databade itself the date fields are not getting reflected ...
The fields ate DTDIS ,UZDIS, DATEN,UATEN. ( i am trying to map these fields in changing parameters)
          gw_vttkvb_new-mandt = sy-mandt.
          gw_vttkvb_new-tknum = gw_return-message_v1(passing shipment number )
          gw_vttkvb_new-dtdis = gi_ship_doc-dtdis.
          gw_vttkvb_new-daten = gi_ship_doc-daten.
          gw_vttkvb_new-uzdis = gi_ship_doc-uzdis.
          gw_vttkvb_new-uaten = gi_ship_doc-uaten.
          APPEND gw_vttkvb_new TO gi_vttkvb_new.
          CALL FUNCTION 'SD_SHIPMENT_HEADER_CHANGE'
          EXPORTING
            i_tvtk                             = '
          I_DESTINATION                      =
          I_DEPARTURE                        =
          OPT_DIALOG                         = 'X'
        IMPORTING
          E_SERV_AGENT_FROM_DELIVERY         =
          E_ROUTE_FROM_DELIVERY              =
          E_LEG_DETERMINATION_DONE           =
          E_NUMBER_OF_CHANGED_LEGS           =
             TABLES
               c_xvttk                            = gi_xvttk
               c_yvttk                            = gi_yvttk
               c_xvttp                            = gi_xvttp
               c_yvttp                            = gi_yvttp
               c_xvtts                            = gi_xvtts
               c_yvtts                            = gi_yvtts
               c_xvtsp                            = gi_xvtsp
               c_yvtsp                            = gi_yvtsp
               c_xvbpa                            = gi_xvbpa
               c_yvbpa                            = gi_yvbpa
               c_xvbadr                           = gi_xvbadr
               c_yvbadr                           = gi_yvbadr
               i_xtrlk                            = gi_vtrlk
               i_xtrlp                            = gi_vtrlp
          I_DEPARTURE_SEQUENCE               =
          I_XVTFA                            =
          I_YVTFA                            =
             CHANGING
               c_xvttk_new                        = gi_vttkvb_new
            EXCEPTIONS
              invalid_change                     = 1
              route_insert_failed                = 2
              tdlnr_insert_failed                = 3
              status_planned_failed              = 4
              status_registrated_failed          = 5
              status_loading_start_failed        = 6
              status_loading_end_failed          = 7
              status_completion_failed           = 8
              status_shipment_start_failed       = 9
              status_shipment_end_failed         = 10
              OTHERS                             = 11.
          IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
         ELSE.
             **** Save shipment created
           CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
       EXPORTING
         WAIT          =
              IMPORTING
                return        = gw_return.
          ENDIF.
Regards,
shilpa talluri .

Hi,
Try this
DATA: wa TYPE zvariant.
wa-mandt     = sy-mandt.
wa-z_var     = 'test'.
wa-projid      = 'test'.
wa-relid        = 'test'.
wa-srtf2       = 'test'.
wa-clustr      = 'test'.
wa-clustd     = ''test'.
INSERT zvariant CLIENT SPECIFIED FROM wa.
Raul Natu

Adobe field values not getting displayed in UWL workitem

Hi,
We filled a ISR Adobe form and submitted it and generated the corresponding notification number.
On clickng the 'display and print form', the form is gettin displayed properly.
But on checking the form at the approvers UWL, the field values are not getting properly filled.
The form is getting properly displayed at R/3 through IQS22 and also the data values are properly attached to the notification number( checked through ISR_PROCESS_EVENT ).
Kindly help.
Thanks and Regards,
Anto.

Thanks for publishing your own solution!
Cheers,
Noë

CJ20N-fields are not getting updated in table PROJ

Hi all,
I have a requirement where I need to transfer the WBS element data created in one system to another using IDOC.
The idoc has generated sucessfully and was also sent/processed successfully in the recieving system but fields STSPD and STSPR are not getting poulated in table PROJ.
In the confic I have assigned FM:IDOC_INPUT_PROJECT to the process code.
Thanks,
Gaurav

Hi,
Please check with the Customer and Material Statistics group in the Customer and material master respectively.
Further check with the LIS settings (Sales Area combination with the Update group).
Reward points if this helps you.
Regards,
Harsh

Href value not getting updated in UMS adapter payload

Hi all,
I am not getting the Href reference in UMS adapter payload. PFB the payload description.
In that we can see the From address of the mail but noe the Href values.
<ReceiveMail_InputVariable>
<part name="body">
<ns0:message>"abc xyz" <[email protected]></ns0:message>
</part>
</ReceiveMail_InputVariable>
Please help me in this. What could be the reason for this ?
Thanks in Advance
Divyanshu Agarwal

Hi all,
I am not getting the Href reference in UMS adapter payload. PFB the payload description.
In that we can see the From address of the mail but noe the Href values.
<ReceiveMail_InputVariable>
<part name="body">
<ns0:message>"abc xyz" <[email protected]></ns0:message>
</part>
</ReceiveMail_InputVariable>
Please help me in this. What could be the reason for this ?
Thanks in Advance
Divyanshu Agarwal

Values not getting updated in Classification tab by BAPI_BATCH_SAVE_REPLICA

Hello Experts ,
I am currently facinmg problem with value updation in Classification Tab for Batch Master. To create the classification I have marked BATCHCONTROLFIELDS-DOCLASSIFY = 'X' and to pass values to classification I have done the below coding.
wa_classvaluationschar-value_char = wa_itab-value1.
APPEND wa_classvaluationschar TO it_classvaluationschar.
wa_classvaluationsnum-value_from = wa_itab-value1.
wa_classvaluationsnum-unit_from = wa_itab-meins.
APPEND wa_classvaluationsnum TO it_classvaluationsnum.
Finally called the FM 'BAPI_BATCH_SAVE_REPLICA'. But , inspite of this I am not able to see values in the created Batch. Please advice on the same.
Thanks
-Trishna.

Hi Trishna,
You need to update below mentioned fields to udpate that.
OBJECTKEY = concatenate (Internal Material number & plant & batch number)
OBJECTTABLE = MCHA
in both the structures CLASSALLOCATIONS and CLASSVALUATIONSCHAR. It will udpate.
Cheers,
Luri

Secure receivables field is not getting updated in FD32

Hi All,
I have created an LC for a customer & assigned the LC in the sales order. The system does not consider the LC amount as credit exposure which is a correct behaviour. When I post the Invoice the system does not populate any value in the secured receivables field in FD32 which should ideally haapen after posting the invoice.
Please guide me if I am missing anything.
Thanks In advance for your efforts.
Regards,
Sulabh

Hi,
Found the ans by myself.
As these are the secured receivables, so after generating invoice, the invoice amount sit under secure receivable as this amount is secured with LC attached in sales order.
Regards,
Sulabh

Work area field value not getting populated in table control grid.

Hi all,
I am currently facing an issue where I have declared a variable and have fetched the workarea field name in it. To be exact, the variable contains the workarea name whose value I am finally populating to the table control. Now although the workarea name when manually copied and pasted in field name in debugging mode exhibits the value of the it, Im unable to fetch the same value in the variable as I have only the work area name in it. I need the value of the workarea-field to be in the variable.Please provide your valuable suggestions for this issue...
Regards,
Edited by: Vishwanath Sreedharen on Jan 2, 2012 3:25 PM

Hi Nabheet,
Please consider the below example...
DATA: l_var(30) TYPE C.
CONCATENATE 'wa' '-' I_FIELD2-NAME INTO l_var.
The i_field2-name contains the name of a custom table field CP_CUSTOM_GRP. So now the l_var contains wa_cp_custom_grp.
Now consider the wa_cp_custom_grp has a value 'BA'.
Now my issue is the l_var contains wa_cp_custom_grp but not its value(too obvious)... Would like to know whether is there a way through which the value of this wa_cp_custom_grp 'BA' could be populated to the variable l_var...

Field not getting updated in BDC while running in background

Hi Friends,
I'm executing a BDC transaction to update the Alternate Tax Classification (VBAK_TAXK1) field in Sales Order. I'm passing value 1 to the field and then saving it directly. While running the BDC in background, the field is not getting updated. On the other hand i checked it running in foreground, the field got updated without any error message.
Can anybody help me advicing why the field is not getting updated in background?
Thanks,
Bestin

Hi ,
Check the the log if you are using a session method and if call transaction then capture the messages for the same,
Because in the foreground the BDC will update the records even if there is a warning message nut in background it will not update. So check the data which you are inserting and try avoid the warning messages also so that it can run smoothly in backfround.
Thanks & Regards
Jyo

Custom fields not getting updated in Mass Maintenance-MM17

Hi,
I have created a custom field in MARC table and the data is getting updated to the MARC table through MM01/MM02 but it is not getting updated by MM17. I have checked the notes 44410, 576160, 414020 and 116311. I have done the following changes as per the sap notes.
1. Created a custom segment ZE1MARCM by copying the standard segment E1MARCM and added the custom field in that
    segment.
2. I have extended the IDOC 'MATMAS03' and added the custom segment ZE1MARCM to E1MARAM.
3. Created a new entry in we82 and provided the extension type 'ZMATMAS03' and release '701'.
4. Adjusted the partner profile in we20 for matmas with port and providing the extension idoc type.
5. Added the custom field in the table MASSFLDLST.
6. Implemented the code in BADI 'MG_MASS_NEWSEG' and exits 'EXIT_SAPLMV01_002' , 'EXIT_SAPLMV02_002' as per the
    sap notes.
The custom field is not getting updated through mass maintenance. Please let me know if i have missed anything?
Thanks,
Geeta

I had this same question several years ago. Please check my answer at Initialize MARC Custom Fields Using MM17 Does Not Work

Quantity field not getting update in PCA document for Goods Receipt

We have the Purchase Account activated for our company code.
For movement type 101 (Goods Receipt), I am getting the quantity field updated for GR/IR account and Stock Account (B/S item).
But the quantity field is not getting updated for the "Purchase Account" and the "other offsetting PL A/C).
Please advice whether I am missing something.
Regards
B.Mohanty

Hi Aravind,
Check SAP notes 1063198 and 1117587.
FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
relevant in this case. This is clearly explained in the note 1063198.
The quantity posts through to FI on the 'goods receipt' items, but not on the
'invoice receipt' items.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
But in the old 'Profit Center Accounting' and the old' Special Ledger'
the field has been important.
As the same logic of these areas to 'store' the Quantity is also used
in the NewG/L the field get only filled in the line, where it make
'sense' from our point of view, because only in the 'goods receipt'
lines a 'real' Quantity is posted to the system.
So as before in the PCA and SL, now also in the NewG/L the Quantity is
filled in the correct and important lines and postings.
In the BSEG ('old document segment table') the field is filled 'just'
as it is send to the FI, but this is not completely correct from the
business point of view.
This can also lead to issues with the reporting and summation to this
field. So with creating the new logic in the NewG/L the 'correct'
standard of the 'writing' for the Quantity has also been taken over.
So in the end, the update and display is correct according SAP standard behavior.
Actually,Quantities within G/L are never reliable,
because the purpose of FI is a view on the data according to amount
but not according to quantity.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
I hope I could be of assistance.
Regards,
Fernando

Data is not getting updated in R3 from CRM

Hi All,
I have a small query pertaining to CRM Middleware.
We have extended the standard scenario using EEWB for sending few customer fields thru CUSTOMER_H. This is assigned to the adapter in R3AC1.
The data is getting populated in the structure correctly. But the problem is that the Z* field is not getting updated in R3. The more strange thing is that it is getting overwritten in CRM by data from R3.
I have checked the problem and found out that the updateflag for z* field is missing. But the problem is that I donot know, how to populate the update flag for the field.
Is there any customization or setting in EEWB for updating the flag?
Please help... Please let me know if u want more informaiton.
Thanks
Sanu

Sanu,
The reason for R3 data getting overwritten in CRM is because the BSS_CENTI has a blank record
and BSS_CENTIX structure might have a X indicator within BAPIMTCS structures.
BSS_CENTI holds central data for the customer and BSS_CENTIX holds the change flags for the fields in central data.
To fix this issue, you have to use CRM table SMOFSUBINT and configure a custom function module which basically yanks the 2 structures from BAPIMTCS table.
Note:- You do this ONLY if you don't want custom fields from ECC to update CRM. Otherwise you have to make sure the BSS_CENTI and BSS_CENTIX structures are consistent in CRM and ECC.

Field value not getting updated in R/3

Similar Messages

Maybe you are looking for