HrPrefs not configured error message

Hi,
When i click on Navigate -->Preferences --> Financial Reporting in the System 11 Workspace, i get the following error.
" Required application module reporting.HRPrefs is not configured. Please contact your administrator.".
Anyone familiar with this problem?
What can be the loss in functionality if we are unable to configure these preferences.

Check the following cases:
1. Whether web server routing has been properly configured for the Financial Reporting Module.
2. Was workspace configured & deployed before Financial Workspace? If this has happened, you will need to configure and deploy Workspace again and reconfigure web server routing.
Regards,
Sayantan

Similar Messages

  • TS1544 "keychain not found" error messages pop up all the time, please help!

    Hi, Ive been constantly getting "keychain not found" error messages ever since i updated to OS X and cant sync messages, facetime, calendars etc. i've tried keychain first aid and get this message:
    Verification started
    Checking keychain configuration for Lee (user ID=501)
    Home directory is /Users/Lee
    Checked login keychain
    Error: login keychain not found
    Unable to get info for ~/Library/Keychains/login.keychain, reason: The operation couldn’t be completed. No such file or directory
    Checked default keychain
    Checked keychain search list
    Problems were found; you should choose the Repair option to fix them
    Verification failed
    Can anyone help?
    Thanks

    Is there a login.keychain in /Users/username/Library/Keychains/? The message says not. If not, create a new one or restore the one residing in your bootable backup/clone or Time  Machine backup.

  • Weird Audio Configuration Error Message

    When I turn on the computer and start up iTunes, everything works fine. The first time. If I close it and then reopen later, I get an error message that says: "iTunes has detected a problem with your audio configuration. Audio/video playback my not operate properly." Program proceeds to open, but I'm unable to play songs. On the Apple site, it said that an answer to a similar (but not identical) error message was to reinstall QuickTime, which I've done. To no avail. Any suggestions? Thanks.
    HP   Windows XP  

    Hi ipod777,
    Since iTunes uses QuickTime to play audio/video content in iTunes, that error message most likely indicates that there's a problem with your Quicktime installation.
    See this knowledge base article for troubleshooting info about this issue:
    iTunes 7 for Windows: iTunes has detected an audio configuration problem
    -Kylene

  • "Configuration Error" message on launching Admin tool

    Hi
    I installed OBIEE 11g 11.1.1.6 client on windows 7 machine and created a DSN also. When I launch the admin tool. I get "configuration error" message.
    Can someone help in identifying what it is and how to resolve it.
    Regards
    Sunil

    For future readers, I was able to resolve this problem.  Here's how:
    For the "Configuration Error" dialog when doing a stand-alone 64-bit Windows client install, you need to go to the "C:\Program Files\Oracle Business Intelligence Enterprise Edition Plus Client\oraclebi\orahome\bifoundation\server\bin" directory, change the permissions to the "bi_init.cmd" file so you can edit it, and comment out the line that starts "set ORACLE_INSTANCE".  You'll get a new error dialog when you try to open the tool complaining that the ORACLE_INSTANCE variable is not set, but you can click through it and the tool will work fine.
    For the issue of RPD version 318 vs 320, you need to download the 11.1.1.6.2 version of the client, which has been released as a patch (it's really just a full install).  It's patch 13794002. 
    Good luck!
    Rick

  • Sales organization 0000 is not defined (Error Message: VF 009)

    Dear All,
    While creating the intercompany invoice, I am getting the following error.
    Sales organization 0000 is not defined (Error Message: VF 009).
    I was able to create till commercial invoice. I am not able to create "Intercompany Invoice".
    Am I missed out any configuration?
    So far I have completed Plant assignment and Internal customer assignement required for Intercompany billing.
    Kindly suggest.
    Regards,
    Mullairaja

    Hellow Mullairaja,
    We are encountering the same problem, and my assumption is that the customer not being extended to the appropriate sales area prior to delivery creation is causing the problem.  Is there an OSS note or process to resolve this issue.  We have extended the customer now and the only thing I can think of to resolve is to reverse the PGI and delivery.  Is there a better way to correct this?  What was your solution?
    Thanks,
    Jordan
    Edited by: Jordan Simons on Nov 23, 2010 3:17 PM

  • Dmg will not launch, "not configured" error

    I have 10.6.7 and all of a sudden dmg will not launch giving the "not configured" error.  I have tried other methods listed in forums such as deleting caches using applejack with a deep clean and even reinstalling the combo update for 10.6.7 and I am getting the same error.
    The console gives the same error message.  I am not sure what to try next.  I am avoiding reinstalling the entire OS.  The is so Windows to me.
    TIA for anyone who can help.
    Steve

    For OS X 10.6, reinstalling the OS is nothing like windoze. Do it. It will replace ALL OS components and Apple's basic apps, such as Safari, TextEdit, and Terminal, but leave everything, including all settings in place. if that fixes your problem, then run Software Update and install what pops up, repeat until it reports you're up to date, repair permissions, and restart. I've never used AppleJack or any of those other so-called tools.

  • Server not found error message

    This is the second time I've "posted" this problem. Maybe the first time didn't take.
    I get SERVER NOT FOUND error message.

    What main page? I take it you did not write your message on the bad
    Firefox. There are several things that could be the problem.
    Some problems occurs when your Internet security program was set
    to trust the previous version of Firefox, but no longer recognizes your
    updated version as trusted. Now how to fix the problem: To allow
    Firefox to connect to the Internet again;
    * Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
    * Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see
    '''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet?esab=a&s=Configure+firewalls+&r=0&as=s Configure firewalls so that Firefox can access the Internet.]''' {web link}

  • Hp 5535 will not scan, error message printer not found

    I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
    This question was solved.
    View Solution.

    Hi @prazdancr,
    Welcome to the HP Forums!
    I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
    For further assistance I will need to know:
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    If the printer is connected, Wireless, or USB.
    If the printer is able to make copies by itself.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
    In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
    Hope to hear from you soon, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Firefox is very slow to respond when opening and nearly always stops responding altogether even refusing to react to Task Manager "End Program@ command. The "not responding@ error message also comes up during navigation on line.

    Firefox is very slow to respond when opening and nearly always stops responding altogether, even refusing to react to the Task Manager "End Program" command. The "not responding" error message also comes up during navigation on line. Several attempt have to be made to get on line. A loss of stability seems to be endemic at the moment.

    Try following the instructions here: [[Firefox hangs]]

  • "Firefox is already running but is not responding" error message and recent firefox update

    "Firefox is already running but is not responding" error message is continuously popping up after the recent firefox update. I have nearly exhausted every possible solution to the problem as seen from the support page for this error message. I know someone who has the same issue on their computer and it also started right after the recent big update. Does the update have anything to do with this reoccurring issue? Is anyone else having this problem? Any other ideas on how to fix it? It would be great to get some help.

    From what I have been reading from other posts on this forum, the
    issue may be caused by the clear history settings.
    Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
    Followed by;
    Windows; '''Tools > Options'''
    Linux; '''Edit > Preferences'''
    Mac; ''application name'' '''> Preferences'''
    Then '''Privacy'''.
    The button next to '''History''', select '''Use Custom Settings'''.
    At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
    At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
    '''Form And Search History''' leaving the others off.
    This is not a cure but will make it easier if Firefox locks up.
    '''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s''' {web link}

  • "Not Found" Error Message Problem

    Hi All!
    I have a really weird issue happening that I have not found a post for in the boards, although there are some similar ones. I have a video project that I had been working on about a month ago and finished except for credits (I had no problems while working on it then). I finally just got the list of names to use for the credits, so I went to open the project to add the credits and I got a "Not Found" and "Out Of Memory" Message. I have 134.6 Gigs open on the Raid I save everything to, so I know I'm not actually out of memory. So I changed the settings to 80% Application and 50% Stills b/c I have around 10 jpegs I was using for titles in it. That seemed to help at least get the sequence opened. I then had media offline messages for those titles, eventhough they are in the browser and defined as online, so I just reconnected each one individually anyway. That helped with that problem. However, I FCP won't render the transitions around the titles. I deleted the transitions and titles and tried to re-render the video clips that were involved in the transitions with the titles. It won't render those. When I try to view the clips in the viewer, I get the "Not Found" message again. I reconnected a couple of the video clips individually, but I still get the message when I try to view them in the Viewer. The clips in the sequence are there and play in the canvas but not in the viewer and I get the "Not Found" message. I have it set to view the image without wireframes, so that's not the problem. The source videos are read as online in the browser and are in the same place as they were when I originally started the project, so that's not the problem. I've tried different variations on the memory usage. I've tried copying and pasting to a new sequence but get the same problem. Does anyone know why all of a sudden I can't view any of my source video and the clips I used in my sequence in the viewer and why it would give me the "Not Found" error message?
    Some Specs that might be helpful:
    FCP HD 4.5
    Dual 2 GHz PowerPC G5
    2.5 Gigs DDR SDRAM
    Raid 1 with 134.6 Gigs Available Space
    SD NTSC DV Footage - MPG files I transfered originally from the client's portable hard drive
    A Few JPGs of Photoshop Titles
    I'm sorry this is insanely long, but I wanted to provide as much detail as I could.
    Emily

    They were originally on a PC. That quite possibly could be it.
    I just checked all the titles again and they are all RGB.
    Our Raid ocassionally has problems, so I'm thinking it might have something to do with that.
    I'm going to try on Monday to just re-import the videos I need into the project and see how that goes. If anyone has any suggestions, I'll take a look on Monday and see what happens.
    I was just hoping that someone might have had this problem and knew what to do.
    Thanks for your help!

  • AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.

    AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
    Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
      http://support.apple.com/kb/HT4700
    I have a W2K3  server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
    Any help greatly appreciated,
    Cheers,
    Ian

    This may work for you:
    http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

  • Package does not exist error-message

    When I try to compile a java servlet with the following piece of code I get a compilation error referring to the import statement.
    I have just included the initial import statements. A large number of errors follow, as a result of this 'package does not exist error-message'.
    Has anyone encountered this or any ideas?
    import javax.servlet.*;
    import javax.servlet.http.*;
    import java.util.* ;
    import java.io.* ;
    import java.sql.* ;
    import com.ericsson.snf.mps.mppapi.mtlr.*;
    The error messages come from the 'import com.ericsson.snf.........' statement.
    I am trying to integrate ericsson software, into my application.
    Thanks,
    java-mobile-user

    That's probably because you are trying to integrate j2me suff with j2se/ee. That won't work without los of extra work..

  • Facetime is not available error message, any suggestions?

    facetime is not available error message, any suggestions?

    Hi ftruseljr,
    Welcome to the Support Communities!
    The article below may be able to help you with this.  Click on the link to see more details and screenshots. 
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    Cheers,
    - Judy

  • 'Bluetooth not available' error message since upgrading to Leopard

    Hi, I regularly seem to get a 'Bluetooth not available' error message since upgrading to Leopard, any ideas why, have to reboot to shake it.
    cheers
    Simon

    I solved the same issue by resetting the SMC. With the computer off, remove the battery and press and hold the power button for 5 seconds. Then reinstall the battery and restart. I haven't had any bluetooth issues since.

Maybe you are looking for