HSTS Headers for 2012 R2 ADFS

Is it possible to use HSTS (or other custom headers) when using ADFS 2012 R2. Is there a way to configure via HTTP.sys or onboard.js?
Thanks!

Hi,
For this issue, i think you may ask in ADFS forums:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=Geneva
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

[SOLVED] Missing Kernel Headers for Catalyst

Hello Everyone,
I am a new Arch guy! I am from the ubuntu world. Love the new arch install, I have installed my own DE.
I use a Radeon HD 68xx so I need the catalyst drivers.
I have tried installing them via: sudo pacman -S catalyst-dkms catalyst-utils (per the wiki)
It gets to the end and gives me this message:
DKMS: add completed.
Error! echo
Your kernel headers for kernel 3.6.2-1-ARCH cannot be found at
/usr/lib/modules/3.6.2-1-ARCH/build or /usr/lib/modules/3.6.2-1-ARCH/source.
error: command failed to execute correctly
Can anybody assist on how I get the kernel headers? As far as I understood, they should be included in Arch.
Last edited by luis84 (2012-10-19 03:08:17)

drewofdoom wrote:
do this:
sudo pacman -Sy linux-headers
Don't use 'pacman -Sy foo' - it may lead to breakage https://bbs.archlinux.org/viewtopic.php?id=89328

Step-by-Step guide for developing a ADF application, does it exist?

Step-by-Step guide for developing a ADF application, does it exist?
Hi there,
At our company we recently begun working on a project using Oracle ADF with
UIX. We got the Oracle JDeveloper 10g handbook and we did a 5 day Oracle ADF
course. A good way to start the project I think.
One thing that bothers me though, is that I cannot find a simple clean example
how to manipulate a record in the DB, going through all steps of MVC. I tried
this forum, the books we got and google. It usualy explains a small portion
of the steps needed, but never a complete example.
I know people will probably say you can design what you want in various ways
and that's its all up to the developer, this is also the power of ADF that it
can be very flexible.
However it would be nice to have a step-by-step example how to be able to insert,
edit and delete a record. Showing all the steps that have to be made in the BC4J,
struts and UIX, including creating triggers, seq, autocommitting etc.
I think ADF is pretty complicated, therefore having a step-by-step example guide
(design pattern) would be very handy for a beginner like me.
Do such guides exist, are there developers who created such a guide for themselves?
Would other developers find such a guide useful? I'm curious about everybody's
opinion.
A good example of what I mean by guide can be found here
How To Build a Simple UIX Search Form, written by Shay Shmeltzer
http://www.oracle.com/technology/products/jdev/tips/shmeltzer/setwhereclause/uix.html
kind regards
Ido

Have a look at the ADF Workshop - it doesn't use UIX rather it uses JSP but I think it will give you the basics.
http://www.oracle.com/technology/obe/obe9051jdev/ADFWorkshop/BuildingADFApplicationsWorkshop.htm
Then have a look at the toy-store demo and the new ADF Case manual:
http://download.oracle.com/docs/cd/B14099_10/web.1012/b19163/toc.htm
http://www.oracle.com/technology/products/jdev/tips/muench/adftoystore1012/index.html

AEBS "Ghost" Router Issue - The Challenge for 2012 (and it's only January)

Yes, it's a bold statement to claim that I have the biggest issue so far for 2012. Why may you ask? Because I've stumped RCN (ISP), Access Media 3 (ISP), Apple Tech Support, and Cisco Tech Support. Here's the challenge for you to see if you can figure it out:
***Also, sorry for the long-winded post. I've spend over 20 hours on this issue and racked up a lot of info to share with you. So please bear with me***
I used to own a Linksys E4200 router (early 2011), which I set up using the wireless network name (for example) "wifi-box". Due to performance issues, I returned the router back to Linksys in April 2011. Shortly thereafter, I purchased a used AESB. I performed a factory reset (not a hard reset, as I know the difference between the two) before setting up my network. Things worked great from April to Dec. 2011.
On Jan. 1st, 2012, the building that I live in switched ISPs. I used to have RCN, and now have Access Media 3 (AM3). Both provide the same type of connection - cable - and both provided me with a modem (not sure the model of the one that RCN provided to me, but AM3 gave me a Surfboard 5101N...shudder). Once the transition from RCN to AM3 took place, I performed another factory reset on the AESB before setting up my my network from scratch.
Now, here's where things get start to get weird. I "Created a wireless network" on my AESB, entered in the name "wifi-box" (to keep it the same as before) as the wireless network name, and followed the rest of the steps until I updated the router. Shortly after the AESB restarted, I received a "Dual (or double) NAT" error right off the bat. Looking into the issue futher, there were now 2 wireless network names called "wifi-box"?!? Huh?!? The actual name isn't "wifi-box", but was something quite unique. So it was easy to tell that it was (once) my wireless name.
The next 5 hours were a blur of reconfiguing, resetting, unplugging, etc. anything that is connected to my network. Nothing worked. During all of this, I also switched the name of the AESB to (for example) "apple-wifi".
As a last resort, I unplugged everything - the Surfboard, the AESB, wiped all Airport Util profiles off my 2 Macs, wiped my profile off my 1 PC, shut them down, did the same for my iPhone 3G, shut off the power strip that the modem and AESB were connected to, and unscrewed the coax cable from the wall. I had a friend come over with his laptop, which he never brought over before, and had him search for a wifi signal. As you would guess, "apple-wifi" didn't appear...BUT "WIFI-BOX" WAS AVAILABLE TO CONNECT TO!!! Arrrgggg!!
At this point it seems that the profile is somewhere outside of my condo. But where???
Moving along, I used a tool called WiFi Stumbler to see if that could help shed some light on my issue. What I found was unheard of. The wirless name "wifi-box" was linked to a Linksys router. Once I discovered this, I logged into my Linksys profile (192.168.1.1) to see if it still worked. IT DID!!! However, that was short lived, because as soon as I clicked on a tab, I was booted out. On top of that, I couldn't log back in. Not sure if this is because it was looking for the Linksys router or not. Whatever the reason...it's just flat out weird.
Because the password to log into my old Linksys profile was the same, it somewhat leads me to believe that someone doesn't have the same wireless name that I do.
Over the past two days, I talked to RCN, Linksys, Apple Tech, AM3, had an AM3 tech out to look at it...no one knew what the issue was. When I talked to Apple, and they thought it might be the Surfboard. The tech said that the Surfboard is also a router, which is why the "dual NAT" error is taking place. However, I then spoke to AM3 and they told me the Surfboard was only a modem. I looked it up online, and it's just modem. Also, I was able to get rid of the "dual NAT" error, but yet I still cannot connect.
My current error msg is: "Airport has the self-assigned IP address 169.XXX.XXX.XXX and will not be able to connect to the Internet". The AirPort indicator light in my Network Preferences is orange, but the AESB indicator light is green (and is reporting no issues).
To end this, (if you're still reading), any help that you may have is greatly appreciated. Everyone I spoke to is stumped. I'm not sure where to go next from here. If you know anything, please let my know . As a quick recap, here are my current settings:
Devices:
     1) MacBook Pro (2011), OSX Lion;
     2) MacBook (2009), OSX Snow Leopard;
     3) IBM Lenovo PC, Win XP SP2
     4) iPhone 3G (iOS 4.2)
Modem:
     Former modem: unknown
     Current router: Surfboard SB5101N
Router:
     Former router: Linksys E4200 (wireless network name "wifi-box")
     Current router: AESB - Apple AirPort Extreme Base Station - Simultaneous Dual-Band MC340LL/A (wireless network name "apple-wifi")
     # of Router in my condo: 1
ISP:
     Former ISP: RCN
     Current ISP: Access Media 3
Thanks and good luck (to you and me)

Thanks Tessarax,
Thanks for the reply, and no worries about the long form answer. Yesterday, I went through your process twice (for good measure). I also unplugged/shut down everything overnight and tried it once again today. Unfortunately, the results are the same.
Me network is currently up and running, albeit a limited connection. It's still producing the "Double NAT" error. My Internet is set up as follows:
These are the settings for "apple-wifi" in the AirPort Util.:
Connect Using: Ethernet
Ethernet WAN: Automatic
Connection Sharing: Share a public IP address. ("Bridge Mode" and Distribute a range of IP addresses" cause additional errors which brings down the network. These errors include setting a DHCP beginning/ending address and no Internet connection. I tried setting the DHCP beginning/ending address several times, but the AEBS never accepts my entries.)
IP: 10.XXX.XXX.XXX
DHCP: Beginning/Ending Address: 172.XXX.XXX.XXX
DNS: 8.8.8.8, 8.8.4.4
These are the settings for "wifi-box" in the Network Preferences:
IP: 192.XXX.XXX.XXX
DNS Servers: 8.8.8.8, 8.8.4.4
Search Domains: 221am3.com
802.1X: No profiles (I deleted them)
Bypass proxy settings for these Hosts & Domains: *.local, 169.XXX/XX
Use Passive FTP Mode (PASV): checked
MAC Address: same as "apple-wifi"
These are the settings for "apple-wifi" in the Network Preferences:
IP: 172.XXX.XXX.XXX
DNS Servers: 172.XXX.XXX.XXX
Search Domains: 221am3.com
802.1X: No profiles (no profiles were avaible for "apple-wifi")
Bypass proxy settings for these Hosts & Domains: *.local, 169.XXX/XX
Use Passive FTP Mode (PASV): checked
MAC Address: same as "wifi-box"
Two new discoveries that I uncovered yesterday are as follows:
1. 802.1X (under Network Preferences): There were 3 profiles that I deleted from this tab last week. After resetting the network, they came back. Whether they were present or deleted, it didn't affect the connectivity of my network. Just mentioning that these profiles came back after deletion (I deleted them again).
2. Yesterday, the network in my building went down for a few hours. I noticed that neither "wifi-box" nor "apple-wifi" were available to connect to. This is an obvious insight, but it seems that when "wifi-box" is unavailable, "apple-wifi" is unavailable as well. However, 'wifi-box' has always been available even when "apple-wifi" is down. Sounds like my Internet signal follows this path:
AM3 > Condo building > "wifi-box" > my condo > Surfboard modem > AEBS "apple-wifi" > my devices (laptops, iPhone, Xbox, etc.)
Two new questions:
1. What is DHCP Client ID and is this something that I need to provide?
2. Could the cables that I'm using cause any problems? Here's the cable that I'm using and the connections between the devices:
CAT5: Router > AEBS
CAT5e: AEBS > MacBook Pro
CAT6: AEBS > Xbox
If there's other questions or infer that you need, please ask

Issue with Fiscal Year Varient Period modifications for 2012

Hi All,
Can you please advice how the Fiscal Year Varient modified periods be transported to different clients.
The issue is, we have 2012 Periods already setup in DEV and transported to QAS and PRD, now the clinet came up with different periods for 2012. I have modified the periods as requested and captured them in transport.
When the new transport was sent to QAS, the new periods are appended to the old periods, instead of replacing the old periods.
any help is much appreaciated.
Thanks
Shasha

Hi All,
My issue has been resolved, we figured out that we need to delete the existing calender and capture that in transport and then recreate the calender for 2012 with new periods and capture this in the same transport and this works.
Instead of deleting the existing calender we changed the values before, which is the reason it was appedning the previous periods and the new periods.
Thanks
Smitha

US Social Security withholding rate for 2012

Hi Guys,
The US Social Security withholding rate for 2012 will change to 6.2% (from 4.2%) for the employee withholding. Our Business would be running the first payroll for 2012 on 12/22/11. The social security withholding change needs to be in the system for this payroll run. Do you know if this change is delivered via a TUB or HRSP and where exactly it has been made available?
Thank you,
Subbaiah

Hi,
The changes have been already released, it is within TUB 45 in BSI
Federal change:
Increases the maximum wage base FROM $106,800 TO $110,100.
Increases the tax rate FROM 4.2% TO 6.2%.
We have already applied and tested it, you should have them applied before the first payroll of 2012
Hope that helps,

Set headers for drill-down reports.

Hi!!!
The problem we have by now is when printing a report, selected characteristis are showed in header as "multiple values" instead of showing the real values that user have choose.
Does anybody knows how to set headers for drill-down reports in order to see selected characteristics?
Thanks in advance...
Adela Cambiasso.

Sorry, me again...
I have found yet they way to show in the header the report parameters, I mean, the selection criterias that user used when execute the report... I was able to show selected characteristics inside de report but not the selection criteria...
Do you know what I have lost? or what to use for this?
Thanks again.
Adela.

HTTP Headers for SOAP

Hello,
I need to set some custom HTTP Header when i send the SOAP message to an endpoint.
I tried this..but doesn't solve my requirement.
SOAPMessage soapmsg = messageFactory.createMessage();
MimeHeaders mime = soapmsg.getMimeHeaders();
mime.addHeader("SOAPAction", "xxxx");
mime.addHeader("Sender", "yyy");
SOAPMessage reply = connection.call(soapmsg, destination);
Can anyone please guide me how to set HTTP headers for SOAP?
Thanks,

Hello,
I need to set some custom HTTP Header when i send the SOAP message to an endpoint.
I tried this..but doesn't solve my requirement.
SOAPMessage soapmsg = messageFactory.createMessage();
MimeHeaders mime = soapmsg.getMimeHeaders();
mime.addHeader("SOAPAction", "xxxx");
mime.addHeader("Sender", "yyy");
SOAPMessage reply = connection.call(soapmsg, destination);
Can anyone please guide me how to set HTTP headers for SOAP?
Thanks,

Hi, im a beginner in ADF and JDeveloper. Can anyone suggest me any video links for learning Oracle ADF?

Hi, im a beginner in ADF and JDeveloper. Can anyone suggest me any video links for learning Oracle ADF?
Thanks,
Vijay

Refer the below link as a starting point.
https://blogs.oracle.com/shay/entry/how_do_i_start_learning_oracle_adf_and_jdeveloper
http://sameh-nassar.blogspot.com.au/2010/04/main-references-to-learn-oracle-adf.html
Cheers
AJ

Anyone having trouble with their calendar? I just lost 3/4 of the info I had for 2012 and 2013?

I was just adding a date into my calendar and I all of a sudden lost 75% of the info I had in there for 2012 and 2013? Any one have any ideas?

System data is the OS or operating system. That is where the recovery stays separated from the rest of the storage so that it doesn't get corrupted. It is not accessible and non-movable.

[solved] building the kernel headers for custom kernels

well, ive been building several different kernels for my laptop, so that i can test stuff. but ive got a problem with the kernel headers.
ive mirrored the arch kernel's PKGBUILD and modified some naming to get a custom kernel. but when i try to build a custmo module, it complains the headers are broken. (example, vbox_build_module).
im pasting the pkgbuild here for future reference...if someone sees something thats plain wrong, please say so.
thanks
# $Id: PKGBUILD 60382 2009-12-04 15:31:11Z tpowa $
# Maintainer: Tobias Powalowski <[email protected]>
# Maintainer: Thomas Baechler <[email protected]>
pkgbase="kernel26"
#pkgname=('kernel26' 'kernel26-firmware' 'kernel26-headers') # Build stock -ARCH kernel
pkgname=('kernel26-git' 'kernel26-git-headers') # Build kernel with a different name
_kernelname=${pkgname#kernel26}
pkgver=2.6.34
pkgrel=1
_patchname=""
_branch="linux-2.6"
_gittag="v2.6.34-rc3"
#_gittag="origin"
arch=(i686 x86_64)
license=('GPL2')
groups=('base')
url="http://www.kernel.org"
source=(config
# standard config files for mkinitcpio ramdisk
kernel26.preset
${_patchname})
build() {
cd ${srcdir}/$_branch
msg "Fetching branch ${_branch}"
## FOR BISECT, Comment these lines
git reset --hard
git clean -d -f
git fetch
msg "Cheking out tag ${_gittag}"
git checkout $_gittag
### a patch
if [ "${_patchname}" != "" ]; then
patch -Np1 -i ${srcdir}/$_patchname || return 1
fi
# if [ "$CARCH" = "x86_64" ]; then
cat ../config.x86_64 >./.config
# else
cat ../config >./.config
# fi
if [ "${_kernelname}" != "" ]; then
sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
fi
# get kernel version
make prepare
# load configuration
# Configure the kernel. Replace the line below with one of your choice.
make menuconfig # CLI menu for configuration
#make xconfig # X-based configuration
#make oldconfig # using old config from previous kernel version
# ... or manually edit .config
# stop here
# this is useful to configure the kernel
#msg "Stopping build"
#return 1
yes "" | make config
# build!
make bzImage modules || return 1
package_kernel26-git() {
pkgdesc="The Linux Kernel and modules"
backup=(etc/mkinitcpio.d/${pkgname}.preset)
depends=('coreutils' 'kernel26-firmware>=2.6.32' 'module-init-tools' 'mkinitcpio>=0.5.20')
# pwc, ieee80211 and hostap-driver26 modules are included in kernel26 now
# nforce package support was abandoned by nvidia, kernel modules should cover everything now.
# kernel24 support is dropped since glibc24
replaces=('kernel24' 'kernel24-scsi' 'kernel26-scsi'
'alsa-driver' 'ieee80211' 'hostap-driver26'
'pwc' 'nforce' 'squashfs' 'unionfs' 'ivtv'
'zd1211' 'kvm-modules' 'iwlwifi' 'rt2x00-cvs'
'gspcav1' 'atl2' 'wlan-ng26' 'rt2500')
install=kernel26.install
optdepends=('crda: to set the correct wireless channels of your country')
KARCH=x86
cd ${srcdir}/$_branch
_kernver="$(make kernelrelease)"
mkdir -p ${pkgdir}/{lib/modules,boot}
make INSTALL_MOD_PATH=${pkgdir} modules_install || return 1
cp System.map ${pkgdir}/boot/System.map26${_kernelname}
cp arch/$KARCH/boot/bzImage ${pkgdir}/boot/vmlinuz26${_kernelname}
# # add vmlinux
install -m644 -D vmlinux ${pkgdir}/usr/src/linux-${_kernver}/vmlinux
# install fallback mkinitcpio.conf file and preset file for kernel
install -m644 -D ${srcdir}/kernel26.preset ${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset || return 1
# set correct depmod command for install
sed \
-e "s/KERNEL_NAME=.*/KERNEL_NAME=${_kernelname}/g" \
-e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/g" \
-i $startdir/kernel26.install
sed \
-e "s|source .*|source /etc/mkinitcpio.d/kernel26${_kernelname}.kver|g" \
-e "s|default_image=.*|default_image=\"/boot/${pkgname}.img\"|g" \
-e "s|fallback_image=.*|fallback_image=\"/boot/${pkgname}-fallback.img\"|g" \
-i ${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset
echo -e "# DO NOT EDIT THIS FILE\nALL_kver='${_kernver}'" > ${pkgdir}/etc/mkinitcpio.d/${pkgname}.kver
# remove build and source links
rm -f ${pkgdir}/lib/modules/${_kernver}/{source,build}
# remove the firmware
rm -rf ${pkgdir}/lib/firmware
package_kernel26-git-headers() {
pkgdesc="Header files and scripts for building modules for kernel26"
mkdir -p ${pkgdir}/lib/modules/${_kernver}
cd ${pkgdir}/lib/modules/${_kernver}
ln -sf ../../../usr/src/linux-${_kernver} build
cd ${srcdir}/$_branch
install -D -m644 Makefile \
${pkgdir}/usr/src/linux-${_kernver}/Makefile
install -D -m644 kernel/Makefile \
${pkgdir}/usr/src/linux-${_kernver}/kernel/Makefile
install -D -m644 .config \
${pkgdir}/usr/src/linux-${_kernver}/.config
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/include
for i in acpi asm-{generic,x86} config linux math-emu media net pcmcia scsi sound trace video; do
cp -a include/$i ${pkgdir}/usr/src/linux-${_kernver}/include/
done
# copy arch includes for external modules
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/arch/x86
cp -a arch/x86/include ${pkgdir}/usr/src/linux-${_kernver}/arch/x86/
# copy files necessary for later builds, like nvidia and vmware
cp Module.symvers ${pkgdir}/usr/src/linux-${_kernver}
cp -a scripts ${pkgdir}/usr/src/linux-${_kernver}
# fix permissions on scripts dir
chmod og-w -R ${pkgdir}/usr/src/linux-${_kernver}/scripts
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/.tmp_versions
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/kernel
cp arch/$KARCH/Makefile ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/
if [ "$CARCH" = "i686" ]; then
cp arch/$KARCH/Makefile_32.cpu ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/
fi
cp arch/$KARCH/kernel/asm-offsets.s ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/kernel/
# add headers for lirc package
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video
cp drivers/media/video/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video/
for i in bt8xx cpia2 cx25840 cx88 em28xx et61x251 pwc saa7134 sn9c102 usbvideo zc0301; do
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video/$i
cp -a drivers/media/video/$i/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video/$i
done
# add docbook makefile
install -D -m644 Documentation/DocBook/Makefile \
${pkgdir}/usr/src/linux-${_kernver}/Documentation/DocBook/Makefile
# add dm headers
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/md
cp drivers/md/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/md
# add inotify.h
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/include/linux
cp include/linux/inotify.h ${pkgdir}/usr/src/linux-${_kernver}/include/linux/
# add wireless headers
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/
cp net/mac80211/*.h ${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/
# add dvb headers for external modules
# in reference to:
# http://bugs.archlinux.org/task/9912
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/dvb-core
cp drivers/media/dvb/dvb-core/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/dvb-core/
# add dvb headers for external modules
# in reference to:
# http://bugs.archlinux.org/task/11194
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/
cp include/config/dvb/*.h ${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/
# add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new
# in reference to:
# http://bugs.archlinux.org/task/13146
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/
cp drivers/media/dvb/frontends/lgdt330x.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/
cp drivers/media/video/msp3400-driver.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/
# add xfs and shmem for aufs building
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/fs/xfs
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/mm
cp fs/xfs/xfs_sb.h ${pkgdir}/usr/src/linux-${_kernver}/fs/xfs/xfs_sb.h
# add headers vor virtualbox
# in reference to:
# http://bugs.archlinux.org/task/14568
cp -a include/drm $pkgdir/usr/src/linux-${_kernver}/include/
# add headers for broadcom wl
# in reference to:
# http://bugs.archlinux.org/task/14568
cp -a include/trace $pkgdir/usr/src/linux-${_kernver}/include/
# copy in Kconfig files
for i in `find . -name "Kconfig*"`; do
mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/`echo $i | sed 's|/Kconfig.*||'`
cp $i ${pkgdir}/usr/src/linux-${_kernver}/$i
done
cd ${pkgdir}/usr/src/linux-${_kernver}/include && ln -s asm-$KARCH asm
# add header for aufs2-util
cp -a ${srcdir}/$_branch/include/asm-generic/bitsperlong.h ${pkgdir}/usr/src/linux-${_kernver}/include/asm/
chown -R root.root ${pkgdir}/usr/src/linux-${_kernver}
find ${pkgdir}/usr/src/linux-${_kernver} -type d -exec chmod 755 {} \;
# remove unneeded architectures
rm -rf ${pkgdir}/usr/src/linux-${_kernver}/arch/{alpha,arm,arm26,avr32,blackfin,cris,frv,h8300,ia64,m32r,m68k,m68knommu,mips,microblaze,mn10300,parisc,powerpc,ppc,s390,sh,sh64,sparc,sparc64,um,v850,xtensa}
package_kernel26-firmware() {
pkgdesc="The included firmware files of the Linux Kernel"
groups=('base')
cd ${srcdir}/$_branch
make firmware || return 1
make INSTALL_MOD_PATH=${pkgdir} firmware_install || return 1
Last edited by eldragon (2010-04-04 14:58:16)

ngoonee wrote:
Check out this line
for i in acpi asm-{generic,x86} config linux math-emu media net pcmcia scsi sound trace video; do
for anything that might be missing. The error message when compiling would give you more of a clue. Off-hand, you may need to add 'generated', as I recall I needed that when the kernel moved to 2.6.33.
Problem with vbox_build_module after Kernel update.
Would you care to elaborate for us less versed in "Linux Geek" skills?
Thanks.......
[root@Arch2009p2 jeff]# vbox_build_module
Building vboxdrv for Linux 2.6.33-ARCH
make[1]: Entering directory `/opt/VirtualBox/src/vboxdrv'
for f in . linux r0drv r0drv/generic r0drv/linux VBox common/err common/string common/log generic math/gcc; \
do rm -f $f/*.o $f/.*.cmd $f/.*.flags; done
rm -rf .vboxdrv* .tmp_ver* vboxdrv.* Module.symvers Modules.symvers modules.order
make[1]: Leaving directory `/opt/VirtualBox/src/vboxdrv'
make[1]: Entering directory `/opt/VirtualBox/src/vboxnetflt'
for f in . linux r0drv r0drv/linux VBox common/err common/string common/log generic math/gcc; \
do rm -f $f/*.o $f/.*.cmd $f/.*.flags; done
rm -rf .vboxnetflt* .tmp_ver* vboxnetflt.* Modules.symvers modules.order
make[1]: Leaving directory `/opt/VirtualBox/src/vboxnetflt'
make[1]: Entering directory `/opt/VirtualBox/src/vboxnetadp'
for f in . linux r0drv r0drv/linux VBox common/err common/string common/log generic math/gcc; \
do rm -f $f/*.o $f/.*.cmd $f/.*.flags; done
rm -rf .vboxnetadp* .tmp_ver* vboxnetadp.* Modules.symvers modules.order
make[1]: Leaving directory `/opt/VirtualBox/src/vboxnetadp'
rm -f vboxdrv.ko vboxnetflt.ko vboxnetadp.ko
*** Building 'vboxdrv' module ***
make[1]: Entering directory `/opt/VirtualBox/src/vboxdrv'
make KBUILD_VERBOSE= -C /lib/modules/2.6.33-ARCH/build SUBDIRS=/opt/VirtualBox/src/vboxdrv SRCROOT=/opt/VirtualBox/src/vboxdrv modules
make[2]: Entering directory `/usr/src/linux-2.6.33-ARCH'
CC [M] /opt/VirtualBox/src/vboxdrv/linux/SUPDrv-linux.o
In file included from /opt/VirtualBox/src/vboxdrv/include/VBox/types.h:34,
from /opt/VirtualBox/src/vboxdrv/linux/../SUPDrvInternal.h:39,
from /opt/VirtualBox/src/vboxdrv/linux/SUPDrv-linux.c:37:
/opt/VirtualBox/src/vboxdrv/include/iprt/types.h:100:30: error: linux/autoconf.h: No such file or directory
make[3]: *** [/opt/VirtualBox/src/vboxdrv/linux/SUPDrv-linux.o] Error 1
make[2]: *** [_module_/opt/VirtualBox/src/vboxdrv] Error 2
make[2]: Leaving directory `/usr/src/linux-2.6.33-ARCH'
make[1]: *** [vboxdrv] Error 2
make[1]: Leaving directory `/opt/VirtualBox/src/vboxdrv'
make: *** [all] Error 2

Oracle Certificate yet to reach for 1Z0-554 - ADF Certification

Hi,
i have done oracle certification for 1Z0-554 - ADF Certification on 11-Jun-2011. I tracked the same in the certview.oracle.com.. after waiting for 48 days i have not received any success kit.
I have raised the request again.. on July 22, 2011.. [SR - 21707155]
The address provide in pearsonvue.oracle.com and the address given is all the same.
please help..

I have got a mail from Support saying
Dear Vinod,
We sincerely apologize for the confusion caused.
Please note that our records indicate that your Oracle Application Development Framework 11g Certified Implementation Specialist success kit was dispatched to you on 20-Jun-11 to the below address:
Address:
XXXX
XXXX
XXXX
XXXX
XXXX
XXXX
Please confirm your address mentioned above is correct in our database and in your PearsonVue account at http://www.pearsonvue.com/oracle/ since you have not received your success kit to this address. If http://www.pearsonvue.com/oracle/ and Oracle do not have your current mailing and email address, you may not receive your certification success kit in a timely manner.
After updating your address you can request an order for reshipment by sending an email to ocp-fulfillment_ww@oracle. Kindly confirm your mailing address and phone number in your mail and please mention your SR#22055741
Kindly request for reshipment only after updating your address in your Pearson Vue account.
Regards,
OCP Teamreshipment requested
Hi,
Please note that I have not received the success kit in this address.
I have my address correctly in pearson account and whatever you have sent that is the correct address but still I havnot received the success kit.
XXXX
XXXX
XXXX
XXXX
XXXX
XXXX
You can give me the consignment number to track this case or can re ship the kit.
Service Request Number 1 : [July 22, 2011] : 21707155
Service Request Number 2 : [August 24, 2011] : 22055741
While sending the kit you can ask them to call me and deliver the kit
Please do the needful
Thanks,
VinodService Request Number: 22071037

Bandwidth requirec for Oracle 11g ADF application

Hi
What is the idel bandwidth recomend for oracle 11g ADF web application .

Can't be answered without knowledge of the app you are talking about.
100 user doesn't mean they are all active at once and even if they are it depends on how much data your app processes. This can't be answered from out point of view.
So your task is to find out how many users are doing what at a given time interval and then find out how much data is processed (there are plenty of tools available to measure this).
How a bout a test run with e.g. 10 users doing normal work with our app, measure the amount of data and calculate the bandwidth from there. Don't forget to take service level agreements (e.g. a page has to be submitted in x seconds) into your calculations.
Timo

Headers for output spreadsheet?

Hello all. I am quite new to LabVIEW and would like to make headers for my output spreadsheet. I have made a 1D array of strings with the appropriate titles.I am having trouble getting both the data I want and the headers to appear on the output file. Another task I would like to be able to do is to be able to overwrite just the data in case I want to put in a specific set of values. For instance, I have 12 columns that will have headers, but what if I only want to show the data for only certain columns and leave the rest blank, but still have the headers show? I am not able to attach code.
Thank you.
Solved!
Go to Solution.

Szklanam wrote:
Hello all. I am quite new to LabVIEW and would like to make headers for my output spreadsheet. I have made a 1D array of strings with the appropriate titles.I am having trouble getting both the data I want and the headers to appear on the output file.
If you don't show us your code how can we tell you what you're doing wrong? We are not mind readers. The typical way of doing this is to call Write to Spreadsheet File and pass it the 1D array of strings, and then call it with the data you intend to write (i.e., your 2D array). Obviously the latter will be with the "append" input set to true.
Another task I would like to be able to do is to be able to overwrite just the data in case I want to put in a specific set of values. For instance, I have 12 columns that will have headers, but what if I only want to show the data for only certain columns and leave the rest blank, but still have the headers show? I am not able to attach code.
This appears to be the same question you just asked: http://forums.ni.com/t5/LabVIEW/Is-there-a-way-to-select-a-certain-box-of-elements-from-a-csv/m-p/19... If it is, please keep your discussion in that thread. If it's not, please explain how it's different.

Adding custom http headers for WSRP requests

Hello,
I wonder whether it is possible to insert custom http headers for WSRP
requests?
To give more details:
We are going to have portlets exposed via WSRP (hosted on non-weblogic
server). We need these portlets to work on different portals including
WebLogic Portal. And we need to have working SSO. There needed at least
2 SSO options:
1. Having SiteMinder protected portal. Will WebLogic pass SiteMinder
headers further to WSRP producer?
2. Custom SSO tokens to be passed as http headers. Is it possible to
make weblogic to add custom http headers when calling producer?
2a. Credential mapping shall be used to get username/password for
backend application (accessed from producer side), and than these
username/password shall be passed as http headers when requesting producer.
Best regards,
Sviatoslav Sviridov

Hi,
About how to use Rest API via node.js, please refer to
http://stackoverflow.com/questions/5643321/how-to-make-remote-rest-call-inside-node-js-any-curl for more information. Hope this helps.
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HSTS Headers for 2012 R2 ADFS

Similar Messages

Maybe you are looking for