HT1174 I'm trying to update my iphone 4 with the new iOS6 and in the middle of updating it gave me an error35, how am I able to update my phone in order to get certain apps?
I'm trying to update my iphone4 with the new iOS6 and in the middle of udating it gave my an error 35, and I would like to figure this out so I can download the apps i need?
What version do you currently have?
If you have iOS 5.0 or later, do not update through iTunes if possible; update over Wi-Fi if you have it. Just go to Settings > General > Software Update.
Similar Messages
-
i have tried updating my iphone to a newer version but after the update was completed the phone is not restarting, just the apple logo is showing up on the screen. what is causing that problem?
Re: i tried updating my iphone to a new verison but after the update the phone is not restarting, just the apple sign is showing up on the screen. what is the problem?
I have tried the above fix and iTunes crashes giving error 27 after trying to load the iPhone firmware.
I have booted my phone in DFU mode and this has made no difference.
My mac is up to date.
My iTunes is up to date.
All i tried to do was update my ios as i have been unable to make calls or send text's all day.
Do you have any other suggestions as my phone is no good to me now.
Many thanks,
Lyd_v -
I updated my iPhone to the new IOS6 and my awesome Google map app was replaced with the sucky, horrible, awful Apple map app. I want my Google navigator map app back!!!!!!
I agree. I liked the previous map app. The version 6 app is powered by tomtom, I think. No more street view. I don't care for the new overhead view when dropping a pin. Plus, the current map app doesn't have the local points or data base that the google maps app had. Too bad I can't go back to the old map app.
-
I tried to update my iphone 4 to i6.1 and now the phone wont turn on or charge
i tried to update my iphone 4 to i6.1 and now the phone wont turn on or charge
Um, connect to iTunes?
-
I updated my computer to the new software and now the iPhoto has a circle with a line through it. When I first try to open it the pop us says: "You can't use this version of the application "iPhoto" with this version of OS X. Version: 9.2.1" When I try to update, it pops up to say "These apps cannot be accepted by your apple id - These apps were already assigned to another Apple ID and they will be available in that Apple ID's purchases list. If you don't have access to that Apple ID and want to receive future updates, you will need to purchase the application". I checked and there is nothing under the "purchases" in my App store. Then will say "update unavailable with this apple id - This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canceled." Then the third pop up says "We could not complete your request. There was an error in the App Store. Please try again". Just want to know how do to fix.
After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed. -
my computer was restarted and now i want to connect and update my iphone with a new itunes. how do i do this without losing all my stuff on my iphone?
i didnt get a chance to back my phone up before the comp crashed
will i lose any of my stuff?When you open iTunes and plug in iPhone (iPod) to computer, it appear in the left bar. Then just simply right click on you iPhone (iPod) and choose Transfer Purchases, this should copy your purchased items to your computer.
Hope this help -
Updated my iPhone 4 to new ios5 and now my camera zoom doesnt work
Updated my iPhone 4 to new ios5 and now my camera zoom doesnt work!!
Tap Settings App>General>Reset, near bottom of list>Reset Nework Settings. See if this helps.
-
one of my friend updated her iPhone with my apple id and now her contacts are inside my iPhone , she has deleted my contact which has been i her contact , how can i bring back my contact ?
Welcome to the Apple Community.
The first thing you should do is have your friend log out of your account and change your password.
Do you have a back up from when you had the contacts on your phone. -
i'm trying to sync my iPad with my new pro and i get message saying 5 computers authorised ?? what to do
1. De-authorize one of your five computers and then authorize your new Pro.
Or, if you don't have five computers and got rid of them before you de-authorized them...
In iTunes, click your iTunes user ID in the upper right corner of the iTunes Store. Select Account and then press the "De-Authorize All" button. All of your computers will be de-authorized. Then it is just a matter of re-authorizing the computers that you want to use with iTunes. -
I was trying to sync my itouch with my new mac, and some songs won't download because they are not authorized for this computer. But even after my computer was authorized they still won't sync. How do I fix this?
I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue. -
i have a new computer from my father that already has his iphone content on it. what do i need to do to switch my phone over from my old computer to the new one and have the new computer sync MY contacts and content to the new computer without erasing my contact lists and purchased apps?
okay from reading posts it seems if I transfer my backed up info from my old comp to the new one and erase my dad's phone's back up i could reset my phone and it would transfer all my old data back onto the phone, be linked to the new computer and i could proceed. Where do i find the backed up info from my phone?
-
iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update
I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
DU needs to be reading the packages on the HD, not the (now out of date) install disc.
The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set). -
I replaced my old iphone with a new one and i lost it i want the s/n of the new one
i replaced my old iphone with a new one and i got it without the box today my new iphone is stolen and i need the serial number of the new one
thanksRead here for the various ways to locate the SN:
http://support.apple.com/kb/HT4061 -
[svn:fx-trunk] 13304: When updating to TLF 584 forgot to add the new rsl and remove the old one.
Revision: 13304
Revision: 13304
Author: [email protected]
Date: 2010-01-06 07:59:22 -0800 (Wed, 06 Jan 2010)
Log Message:
When updating to TLF 584 forgot to add the new rsl and remove the old one.
QE notes:
Doc notes:
Bugs:
Reviewer:
Tests run:
Is noteworthy for integration:
Added Paths:
flex/sdk/trunk/frameworks/rsls/textLayout_1.0.0.584.swf
Removed Paths:
flex/sdk/trunk/frameworks/rsls/textLayout_1.0.0.571.swfiTunes needs QuickTime to work.
I think you will be all set if you install QuickTime standalone, not regular
http://www.apple.com/quicktime/download/standalone.html
Download the isntall file to your hard drive - don't install it over the internet.
If you are running anything Norton, turn that completely off before installing. -
How can I export photos from APERTURE with a new sequence and ignore the embedded JPEG number? Have tried renumbering to no avail.
has anyone resolved this issue?
This is now the second big Problem with using Apple's Appeture with NO apparent FIX...
Aperture has NO DIRECT way to Burn to a CD/DVD & apparently NO way to RE-SEQUENCE the numbering system????
ANYONE... I wish APPLE would address/fix these 2 problems... LIGHTROOM I guess is next?Hi David,
Coming in and whining loudly is rude. We are all volunteers here, voluntarily sharing our expertise so that users like you can make the most of their time with Aperture. Speaking just for myself: although I do care about your success with software (it's why I'm here), I don't care what software you use. If you want to use Lightroom, do so, and post your questions in an appropriate forum.
Burning files to a CD is a file operation done at the system level (it is built into OS X). Aperture lets your create sharable image-format files from your Images. You then use OS X's tools to burn those files to a CD. Iirc, you can set up a "Burn Folder" in Finder, into which you can export files created from your Images, and with a single click burn your CD.
Naming the files you create by exporting your Images can be tricky. There are _many_ possibilities. Some things can't be done. Sequencing can be done in a number of ways (see Léonie's answer above). What have you tried? What was the result? In what way did this differ from what you expected?
--Kirby.
Maybe you are looking for
-
Can anyone help me please. I tried installing my Logic Express 9.0 but it states I need an update. Ok.. great. So i tried to download it via apple.com but my serial number doesn't work. I can't even schedule an appointment with them because I am in I
-
Greetings, I have an LV 8.6 HMI that performs Data Socket reads from Network Shared Variables. I am finding that it works well until I try to shut down and close all the DS references. I can usually get away with this once, but if I try to restart th
-
Exclude in variable customer exit
Hello, Can you help me solve problem with exclude in variable customer exit? I have z-table with name of variable and values. Primary I need save multiple values with exclude. I was tried this code: if i_step eq 2. select * from zbwsd_01 into table i
-
When i am using the procedure owa_util.who_called_me as explained below I am getting some error message displayed on my browser. What is wrong with my code? How should I rectify it? (variables declared) v_rp_owner varchar2(32767); v_rp_name
-
Attempt to generate WebHelp (Primary Layout) after updates hangs and then shows "Not Responding"
Hello! I am attempting to generate after making a number of updates to topics in a large project using RoboHelp 7. RoboHelp 7 was recently installed on my machine by an IT staff person. It has been several years since I worked with this project in