HT1212 My ipad reads disabled. when i plug it in it tells me i need to put in the passcode but i can't get to that screen. can any buddy help
I recently purchased an Ipad3 from a friend cause he upgraded. So i set it up and now its reading "ipad is disabled" connect to itunes. I did have a passcode on there and I know password but i can't get into the screen to put it in. can anyone help or give me a tip please.
This will fix it
http://support.apple.com/kb/HT1212
Similar Messages
-
I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me
Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
From Here > http://support.apple.com/kb/TS3694 -
I m having ipad 4 and after upgrading to ios7 I m facing continuously rebooting problem while switching between apps can any buddy help or facing same problem
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use.. -
i can't open my adobe acrobat reader - just can view the miniature version on the taskbar, but it won't open to full screen size? PLS HELP!
What is your operating system? Reader version?
-
I'm trying to backup my iphone and restore it because the screen has gone black. It won't allow me to do anything without putting in the passcode. I can't put in the passcode because the screen is black.
Try rebooting it (hold home and power together for 15-20 seconds). If the display doesn't come back to life, you're out of luck. You're supposed to back it up before it fails. It's too late to do so after the fact.
-
my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again. -
please please help me figure this out
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
So my ipod (not sure if its a 1st or 2nd g) but it has the usb and itunes symbols on the screen but when i plug it into the computer, it says, "unable to connect this ipod. type the passcode on the ipod on the ipod to connect" but i cant because of the symbols. what should i do?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I forgot my password to my ipod touch and locked it out. It told me to connect to iTunes and I did. I put it in recoery mode and started the 5 hour download of the restoring process. I tried it many times it always ends up stopping and an error occurs. Now iTunes is telling me I have to put in my password for my ipod before iTunes can use it and recognize it. But my ipod is still telling me to connect it to iTunes and I just want to restore my ipod.
Try Recovery Mode a few more times.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
I bought my I pad at the pawnshop and I need to sign out the previous Apple ID could you please help me with this
If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must contact the previous owner to get permission to use the device. If you cannot contact the previous owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.
-
Hi,
I have downloaded Printer pro and having already printed a letter last evening, I now find that on returning to the programme this morning I am faced with an Enter Passkey code.
Please excuse the ignorance, but I didn't expect this, how di I find the Pass key code ??????
Anyone's help with issue would be very much appreciated.
Thank you
Robert T.Thank you so much for helping,
But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
Anyway thank you very much for your time and effort!!!! -
help! I forgot my passcode so it disabled my ipod untill i hooke dit up to iTunes. So i hooked it up today and iTunes says i cant access the ipod uness i put my passcode in on the ipod. So i go to my ipod andtry that but its restricting me everything unless i hook up to iTunes. So my ipod and iTunes are telling me to do opposite things
Read the article you linked.
-
What do i do?????
Follow ALL the steps Here > http://support.apple.com/kb/HT1808
You may have to try this more than once. -
Find my iPhone is activated on my device. My device is locked. iTunes is prompting me to access my iPhone even though Im locked out of it to disable find my iphone before I can use the backup???
Can anyone help me with this?
Wonder if this has anything to do with iOS7 installation?iOS: Forgotten passcode or device disabled after entering wrong passcode
-
hi guys i have an ipad 1 and when i plug it in to my macbook pro picasa opens up and show its name but when i open itunes i cant find the name, ive been working my head out to solve the problem please help me:(
Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Maybe you are looking for
-
I thought the newer 7.0.3 was supposed to cure some of these issues. It has made Siri develop no repsonse 50% of the time and messageing still freezes. In order to use my phone, I have to reboot at least once a day. This is NOT what I expected from
-
Apple remote desktop will not show my computer screen on class screens
Hi I hope someone can help. i have just set up a mac suite running latest OS X 10.10 using apple remote desktop. The system is a bit sensitive but mostly works fine. The odd computer drops off etc. However, I want to be able to show the teacher compu
-
My iPhone 4 screen is not visible at all need help
Hi, Just bought IPhone 4 cheap figuring I'd fix it & make a quick buck. The screen is black. I've replaced screen but still same problem. The seller says he dropped it. Could it be water damage. Can anyone help?
-
I am using following code on mac: app.system("/path/to/external/executable &"); It runs external program in background (without showing console/terminal). On windows I tried many things like: app.system('start "" "/path/to/external/executable"'); app
-
Change AppWeb display language
Is it possible to change language of AppWeb (to different one than on SiteCollection)? I do not mean localization, but changing display language of default elements(i.e. ribbon). On my main site collection I am able to change this without any problem