HT1222 how to enter to dfu mode

how to enter to dfu mode

Hello ameer44,
Welcome to the Apple Support Communities!
If your iOS device cannot update or restore, I would suggest using the instructions located in the attached article to place your device into recovery mode and restore. 
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Cheers,
Joe

Similar Messages

  • How to enter full screen mode in email?

    Can we enter full screen mode when reading an email in landscape mode? I can see safari has already provide this feature. It is really useful for reading  wide pages using iPhone 5 with a longer screen. But I don't know how to use this feature for email. In landscape mode, there are 2 email menus plus the system bar, which occupy too many screen. Any idea on how to enter full screen mode?
    Thanks.

    Ok, hope this will be added in the next release.

  • How to Recover from DFU mode

    Hi, Recently I made a request to AT&T to unlock my iphone 3gs. For past two week I didn't charge my mobile. After AT&T unlocked my phone, I tried to connect to itunes to do a restore and backup. But my mobile is not switching on and seems in DFU mode. Can anyone tell me how I can re-start my phone?
    Thanks,
    K.Vidhyasagar

    Have you tried any of thses http://www.apple.com/support/iphone/assistant/phone/

  • IOS 8.0.2 update made my iPhone enter to DFU mode!

    I was updating my iPhone to iOS 8.0.2 in the device, and when the update began the iPhone poped-up the Connect to iTunes screen, now it is on DFU Mode and iTunes cannot update my iPhone, it just appear the iPhone logo and I can't ever get in that window, please help me.

    Follow these instructions to restore your iPhone:
    If you can't update or restore your iPhone, iPad, or iPod touch

  • How to enter Enhancement Mode of ABAP OO Classes: Add Methods, Pre-Methods.

    Hello,
    do you know how to enter the enhancement mode of the class builder?
    I want to enhance a standard global ABAP OO class by implicit enhancements for inserting methods, attributes or pre- and post-methods - as described in  <a href="http://help.sap.com/saphelp_nw70/helpdata/en/58/4fb541d3d52d31e10000000a155106/content.htm">Online help</a>.
    I start the SE24 on my NW 7.0, but there is no menu <i>Edit-> Enhancement Operations-> Enhance Class/Interface </i> as written in <a href="http://help.sap.com/saphelp_nw70/helpdata/en/86/b83142680d5c33e10000000a155106/content.htm">Online Help</a>.
    When I press the <i>Display</i> button, there is no enhancement button (the spiral), and the sub entries of menu <i>Edit-> Enhancement Operations</i>, like <i>Insert Pre-Method</i> are inactive (gray).
    In SE80 I don't find them too. The only implicit enhancements I found are on the beginning and end of methods implementation code.
    Do you have experience enhancing classes?
    Best regards
    Michael Umlauff

    Hallo Michael,
    You first have to go in se80 or se24
    Then menu Class-> Enhance
    Then you will be able to use Edit-> Enhancement Operations-> Insert Pre-Post Methodes
    Regards,
    Walter

  • I sleep my iPhone 4 and then it enters DFU Mode?

    So basically, I downgraded iOS 7.0.6 (because it looks horrible and it's laggy) to iOS 6.1.3 on my iPhone 4 using a custom firmware I created with my SHSH Blobs for iOS 6.1.3. During the restore, I get error 37 and have to boot it tethered with a recovery fix in RedSn0w so that it will boot. So I syncronized my iPhone with iTunes so all my movies and music were stored on the phone. However, I press the sleep button and then after about a minute, it just shuts down, enters DFU Mode and then won't boot up again. Any suggestions on how this can be fixed?

    NiallTilley wrote:
    So basically, I downgraded iOS 7.0.6
    Congratulations. You've rendered your phone unsupportable. Downgrading is not supported at all.
    If it won't restore in DFU mode, you've permanently bricked it.
    Buy a new phone.

  • My iPod Touch Won't Turn On, Charge or Enter DFU mode

    Hey, one day my iPod just wouldn't charge anymore,I though my charger was the problem so I bought a new one, and it still didin't work so I tried another one and still nothing. When my iPod turned off because of low battery it would not turn on again. Then I thought my battery was the problem so I had it changed at the store and it still didn't work. I tried to enter DFU mode and recover, but it just won't enter DFU mode (and no, I'm sure I'm not doing it wrong, I did it before). I hope this is somehow fixable because people at the store didn't know how to fix it and I don't really have to funds to buy a new one. And also, store I was talking about isn't apple store because we don't have them here in Croatia, so I can't really get a new one for free...

    Well... since I have been with it in all services in my area and none of them know how to fix it, I guess I'll just have to buy a new one eventually... thanks anyways for replying...

  • How do I keep the iPod Touch from people resetting it/putting it in DFU mode?

    I have iPod Touch 5th Gen. iOS 6.1.3 again.I'm having surgery this week.My question is How do I keep the iPod safe from people doing stuff like putting it in DFU mode,resetting my stuff,etc. because I don't want people to get on my stuff while I'm having 1 hour/30 minutes of surgery?
    Also,the surgery is just 1 hour/30 minutes.

    Besides locking in a safe or giving it to a trusted person, all you can do is use a complex screen-lock passcode to protect your personal information. Someone still can erase the iPod by placing in recovery mode and restoring via iTunes but they will have to enter your ID and password to use the erased iPod

  • How to put my apple tv 3rd generation into DFU mode

    I tried the way that I google on the internet which only plug the micro USB into the apple tv and connect it to the PC, but I don't see the light flashing at all. and my apple TV is on software 5.0(4099) version. And then I plug the power cord as well and open iTunes, the iTunes can recognize the apple TV and everything seems working fine inside the iTunes. So I believe the USB cable is working fine.
    Have anyone put your apple TV 3 into DFU mode before?

    Hi!
    I´m sorry i dont have a solution to your problems because i have the very same problem.
    My Apple Tv (3rd gen) freezes in menu and i cant restore it in iTunes (Error 1611).
    So i´ve heard that you should put your device in DFU mode, and apparently its really easy for 2nd gen, but for some reason, no-one knows how to do it in 3rd gen, not even Apple support!!
    Why does it have to be so hard? i mean it should be as easy as for the 2nd gen. I hope someone answers to this thread.

  • How can I get to DFU mode with a broken power button?

    How can I get to DFU mode with a broken power button?

    aarons84 wrote:
    This is bad, but i tried jailbraking my iphone
    You may as well stop there. We can't help you.

  • My brother's iPod was disabled for 23 million minutes then my dad fiddled with it. Now it's stuck in recovery mode and wont connect to my computer or go into DFU mode. How do I fix it?

    It's an iPod touch 4S, white.
    I've tried on various computer types (windows, macs, and even a linux) and nothing. None of the computers even recognized a device being plugged in.
    I know it's not the cable, our other idevices use that one fine (I bought several more to be sure and no luck).
    My dad is at his wits end and I want this insanity to end. Help please.
    It's been locked so long I don't know what iOS it's on.
    Dear god, what did my brother do.

    See what you missed here:
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HT201274 How do I erase all content and settings on my ipod touch when I don't have my password or the original computer?  I can't figure this out and it is frustrating me.  I need to completely reset my ipod touch. I think it is in dfu mode now

    How do I erase all the content and settings on my 8GB ipod touch without the password or the original computer?  This is very frustrating and I think I have it in the DFU mode.  I can't seem to figure out how to completely restore this ipod touch.  Please help.

    Did you get a message in iTunes that said iTunes found an iPod in recovery mode? If not then you might have not gotten the iPod in recovery mode. Try using this program to get the iPod in recovery mode:
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • My iPod touch 64 GB doesn't charge or show up on iTunes, because the charger overheated it. How can I fix this problem? I tried restoring too and putting it into DFU mode but it doesn't work.

    Thanks.

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar      
    Also
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iphone 5 is frozen on the screen that shows a cable and itunes symbol.  I can not get the phone to enter DFU mode and itunes does not recognize the phone when plugged in to itunes.  The phone was mid update when it was disrupted....

    I plugged my iphone in to do an update and it was mid way through the update when the phone was accidentally disconnected.  Now the phone is stuck on the screen that shows a cable and the iTunes image suggesting the phone needs to be plugged in to iTunes.  I have plugged it in, powered on and off, attempted to enter DFU mode numerous times all with no success.  ITunes does not recognize the phone and I continue to only receive the screen saying I need to plug in to iTunes..  Please help!

    Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.

  • How do you get your ipod 5 into dfu mode???? Please answer back with specific details

    I have restored it and it says in order to activate I have to have my brothers info to activate but he will be gone for some years and so I can't activate it without his info.......wat do i do????? Can I go back and try to restore it again.

    DFU mode will not help. You need to enter your brother's Apple ID and password or have him remove the iPod from his account
    iCloud: Find My iPhone Activation Lock in iOS 7
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account

Maybe you are looking for

  • Error While Consuming the webservice in ABAP

    Hi,   I am trying to consume a webservice in ECC. I have imported the WSDL and generated the proxy. Did the configuration in the SOAMANAGER. While calling the webservice from the program I am getting the following error message. "SRT: Unsupported xst

  • Error in purchase order creation

    Hi, While doing me21n systyem throwing error message. "purchase order unit  "TO" allows fewer decimal places only" i want to enter purchase order quantity as 100.200 Tonnes but system is not allow this quantity how to rectify this error. regards, meh

  • How do I transfer PDF files from Adobe to my iPad?

    I need to transfer manuels to my Apple iPad from Adobe _ Reader but it is blocked by a password apparently set by Adobe.

  • Problem Custom Miro

    Hello In the cancel Custom MIRO document (Through MR8M) , some value goes the Stock a/c where stock is available. Please advice The Original Inv doc COMMISSIONER OF CUSTOMS     5,703,889.00- Customs Clearing     1,115,128.00 Customs Clearing     4,35

  • Short "cuts" with Airport Express

    Hello, I have changed my internet box (Orange Livebox in France) and I had remake the connexion of the Airport Express to the new network. Airplay from iTunes, iPad and iPhone (any apps) works fine but sometimes I have some really short "cuts" of the