HT1295 Is it possible to use vst plugins for garageband from an external hard disk? (Without installing to the system hard disk)
Hi,
I got my MacBook pro 17" installed a 250GB of SSD as a system disk.
And i got 4TB of Thunderbolt External Disk.
The thing that i want is: to use my VST plugins for Garageband or Logic without fulling the system disk. Is it possible use them from an external disk?
Thnx
Garageband can't use VST plugins.
If you're talking about AUs: you could try to put an alias into the HD/Library/Audio/Plug-Ins/Components folder instead of the actual files, and see if GB loads them.
Similar Messages
-
How to use VST Plugins from Premiere Pro CS5 in Adobe Audition 3.0 ?
I have tried to use VST plugins from Premiere Pro CS5 into Adobe Audition 3.0, but could not use it.Is any method to use them ?
Unless I'm mistaken, you can't do this at all - Adobe lock all their VST effects so that they only work with the app they were intended for. Which also means, of course, that you can't use Audition VST plugins with any other software either. Since Audition isn't currently in the CS, there isn't even an exception there, I suspect.
-
Is it possible to use backup files previously copied to an external hard drive to backup an iPhone?
My sister froze her iPhone by trying to turn it off during a software update (not sure why) and restored it because she thought it would fix it. Unfortunately she unintentionally deleted all of her data and settings. She doesn't use iCloud, so I'm assuming all her files are backed up to her computer when she syncs her iPhone, but using iTunes I can only find two backup points using Edit>Preferences>Devices, both in the past few minutes. I know that each sync overrides the last backup files instead of creating newer ones, so apparently older backup files from her computer can't be used to recover her data. However, we both periodically use an external hard drive to back up our computers by basically dragging and dropping our files onto it, so there is an earlier version of her User folder on the external hard drive. It would definitely be preferable to use the backup files from a few months ago that are on the external hard drive and lose a few photos than to lose years of data, so would it be possible to direct iTunes to those backup files (AppData etc) instead of the ones saved on her computer hard drive? There's not any kind of browse option I can see that could allow me to get iTunes to search for backup files on the external hard drive and I'm not computer savvy enough to manually find the files and connect them to iTunes. Is it even possible to use backup files from an external hard drive? Do I have to replace the ones that exist on her computer now?
Garageband can't use VST plugins.
If you're talking about AUs: you could try to put an alias into the HD/Library/Audio/Plug-Ins/Components folder instead of the actual files, and see if GB loads them. -
Is it possible to use iCloud storage for videos
Is it possible to use iCloud storage for videos. I ran out of 16 gig storage on my iPad.
You can try cloud storage like Sugarsync, Dropbox or Box.com
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%203/b8e055e5cd15e01d23d aa6d55f1bea4b.jpg -
Simulation using Eclipse plugin for JCOP tools
Dear All,
In search for a simulation environment for java card applet development I tried to use Eclipse plugin for JCOP tools.
The samples which comes with the JCOP tools works fine but when try to debug my applet I receive the error: Wrong Data 6A 80.
Generic JCOP v2.4.1 is selected for Java Card Simulation.
Following is the JCOP Shell screen:
cm- /term "Remote|localhost:8050"
--Opening terminal
/card -a a000000003000000 -c com.ibm.jc.CardManagerresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B F8 13 00 00 81 31 FE 45 4A 43 4F 50 76 32 34 ;.....1.EJCOPv24
31 B7 1.
IOCTL().
ATR: T=1, FI=1/DI=3 (93clk/etu), N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOPv241"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(908058 nsec)
<= 6F 65 84 08 A0 00 00 00 03 00 00 00 A5 59 9F 65 oe...........Y.e
01 FF 9F 6E 06 47 91 92 18 00 00 73 4A 06 07 2A ...n.G.....sJ..*
86 48 86 FC 6B 01 60 0C 06 0A 2A 86 48 86 FC 6B .H..k.`...*.H..k
02 02 01 01 63 09 06 07 2A 86 48 86 FC 6B 03 64 ....c...*.H..k.d
0B 06 09 2A 86 48 86 FC 6B 04 02 15 65 0B 06 09 ...*.H..k...e...
2B 85 10 86 48 64 02 01 03 66 0C 06 0A 2B 06 01 +...Hd...f...+..
04 01 2A 02 6E 01 02 90 00 ..*.n....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 B1 04 15 2B 41 3F 62 AB 00 .P......+A?b..
(2668 usec)
<= 00 00 F9 02 71 E3 BB AD BD CD FF 02 00 00 3D 02 ....q.........=.
9C 31 C7 89 AD 44 8E 13 17 15 2E 5A 90 00 .1...D.....Z..
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 CE 6C DC D2 8C BE 5E 33 EC 58 D0 ......l....^3.X.
57 3A 52 D2 24 W:R.$
(2288 usec)
<= 90 00 ..
Status: No Error
cm> delete -r a00000006203010c04
=> 80 E4 00 80 0B 4F 09 A0 00 00 00 62 03 01 0C 04 .....O.....b....
00 .
(1084 usec)
<= 6A 88 j.
Status: Reference data not found
jcshell: Error code: 6a88 (Reference data not found)
jcshell: Wrong response APDU: 6A88
Ignoring expected error
cm> upload -d -b 250 "D:\JCOP\eclipse\projects\DigitalTachograph\bin\digitaltachograph\javacard\digitaltachograph.cap"
=> 80 E6 02 00 16 09 A0 00 00 00 62 03 01 0C 04 08 ..........b.....
A0 00 00 00 03 00 00 00 00 00 00 00 ............
(2100 usec)
<= 00 90 00 ...
Status: No Error
=> 80 E8 00 00 FA C4 82 84 42 01 00 25 DE CA FF ED ........B..%....
02 02 04 00 01 09 A0 00 00 00 62 03 01 0C 04 11 ..........b.....
64 69 67 69 74 61 6C 74 61 63 68 6F 67 72 61 70 digitaltachograp
68 02 00 21 00 25 00 21 00 0E 00 29 03 3E 00 CD h..!.%.!...).>..
23 D2 01 BB 04 44 00 00 09 E3 4B E5 00 11 00 05 #....D....K.....
01 A2 04 01 00 04 00 29 04 00 01 07 A0 00 00 00 .......)........
62 00 01 02 01 07 A0 00 00 00 62 01 01 02 01 07 b.........b.....
A0 00 00 00 62 01 02 02 01 07 A0 00 00 00 62 02 ....b.........b.
01 03 00 0E 01 0A A0 00 00 00 62 03 01 0C 04 01 ..........b.....
01 DF 06 00 CD 00 00 00 80 00 00 FF 00 01 00 00 ................
00 01 81 03 13 00 12 07 03 00 00 02 01 03 06 0B ................
8C 81 00 00 00 80 00 0B 00 0B 01 01 00 00 0B F9 ................
00 80 00 11 00 0F 01 01 00 10 0E A9 0D D4 0D F7 ................
0E 07 0E 18 0E 26 0E 35 0E 44 0E 50 0E 72 0E 81 .....&.5.D.P.r..
0E 90 0E 9B 0E F5 11 05 11 1A 11 50 00 80 00 05 ...........P....
00 04 01 04 00 01 13 AF 13 B5 13 BA 14 0C 13 00 ................
(6775 usec)
<= 6A 80 j.
Status: Wrong data
jcshell: Error code: 6a80 (Wrong data)
jcshell: Wrong response APDU: 6A80
Unexpected error; aborting execution
I will be very happy if you can help me. I am desperately in need of a working debugging environment.
Thanks in advance!
Kind regards,
Mehmet* Processes incoming READ_BINARY APDUs. Returns data of the currently
* selected file.
* @param apdu where the offset is carried in header bytes p1 and p2.
* @param le expected length by terminal
* @return length of the response APDU
private short processReadBinary(APDU apdu, boolean protectedApdu, short leUnprotected) {
if (!hasFileSelected()) {
ISOException.throwIt(SW_CONDITIONS_NOT_SATISFIED);
byte[] buffer = apdu.getBuffer();
// retrieve p1p2 from apdu buffer
byte p1 = buffer[OFFSET_P1];
byte p2 = buffer[OFFSET_P2];
short offset = Util.makeShort(p1, p2); // offset encoded in P1/P2, 15 lowest bit
// offset encoded in P1/P2, 15 lowest bit
// check if le != 0 <-- no response expected
if (leUnprotected == 0) {
ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
if (selectedFile == null) {
ISOException.throwIt(ISO7816.SW_FILE_NOT_FOUND);
if ((selectedFile.getAccessConditions() & READ_REQUIRES_SM) == READ_REQUIRES_SM) {
if(!protectedApdu)
ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
short fileSize = (short) selectedFile.getFileLength();
// check offset
if (offset >= fileSize) {
ISOException.throwIt(ISO7816.SW_INCORRECT_P1P2);
// check expected length
if ((short) (offset + leUnprotected) > fileSize) {
ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
//ISOException.throwIt(SW_TAMAM);
short bufferOffset = 0;
crypto.setEncryptionStatus(isSelectedFileEncrypted());
if (protectedApdu) {
bufferOffset = crypto.getApduBufferOffsetDT(leUnprotected);
if(isSelectedFileEncrypted())
bufferOffset = crypto.getApduBufferOffset(leUnprotected);
apdu.setOutgoing();
Util.arrayCopyNonAtomic(selectedFile.getData(), offset, buffer, bufferOffset, leUnprotected);
return leUnprotected;
* Processes and UPDATE_BINARY apdu. Writes data in the currently selected
* file.
* @param apdu
* carries the offset where to write date in header bytes p1 and
* p2.
private void processUpdateBinary(APDU apdu, boolean protectedApdu) {
if (!hasFileSelected() || isLocked()) {
ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
if ((selectedFile.getAccessConditions() & DigitalTachograph.UPDATE_ALW) != DigitalTachograph.UPDATE_ALW) {
if ((selectedFile.getAccessConditions() & DigitalTachograph.UPDATE_REQUIRES_SM) != DigitalTachograph.UPDATE_REQUIRES_SM) {
ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
return;
}else if(!protectedApdu){
ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
byte[] buffer = apdu.getBuffer();
byte p1 = buffer[OFFSET_P1];
byte p2 = buffer[OFFSET_P2];
short offset = Util.makeShort(p1, p2);
short readCount = (short) (buffer[ISO7816.OFFSET_LC] & 0xff);
//if (!protectedApdu){
readCount = apdu.setIncomingAndReceive();
while (readCount > 0) {
selectedFile.writeData(offset, buffer, OFFSET_CDATA, readCount);
offset += readCount;
readCount = apdu.receiveBytes(ISO7816.OFFSET_CDATA);
private short processInternalAuthenticate(APDU apdu , boolean protectedApdu) throws CryptoException {
byte[] buffer = apdu.getBuffer();
short lc = (short) (buffer[OFFSET_LC] & 0xFF);
if (lc != (short) (KID_LENGTH * 2)) {
ISOException.throwIt(SW_WRONG_LENGTH);
if (apdu.setIncomingAndReceive() != lc) {
ISOException.throwIt(ISO7816.SW_WRONG_DATA);
// Check if VU.CHR maches the one of the selected certificate on the card
if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + KID_LENGTH), keyStore.selected_KID, (short) 0, KID_LENGTH) != 0) {
ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
if (Util.arrayCopyNonAtomic(buffer, OFFSET_CDATA, Rnd1, (short) 0, (short) 8) != (short) 8) { // Receive Rnd1
ISOException.throwIt(ISO7816.SW_WRONG_DATA);
// Hash(PRnd2||K1||Rnd1||VU.CHR)
random.generateData(PRnd2, (short) 0, (short) 90);
random.generateData(K1, (short) 0, (short) 16);
crypto.shaDigest.update(PRnd2, (short) 0, (short) 90); // PRnd2
crypto.shaDigest.update(K1, (short) 0, (short) 16); // PRnd2||K1
crypto.shaDigest.doFinal(buffer, OFFSET_CDATA, lc, digest, (short) 0); //Rnd1||VU.CHR
BigNumber mod = new BigNumber((short) 128);
mod.init(keyStore.Card_PubMod, (short) 0, (short) keyStore.Card_PubMod.length, BigNumber.FORMAT_HEX);
mod.subtract(signed, (short) 0, (short) 128, BigNumber.FORMAT_HEX);
if (mod.compareTo(signed, (short) 0, (short) 128, BigNumber.FORMAT_HEX) == -1) {
mod.toBytes(signed, (short) 0, (short) 128, BigNumber.FORMAT_HEX);
// To be added: if the selected private key is considered corrupted, the processing state returned is '6400' or '6581'.
signed[0] = (byte) 0x6A;
Util.arrayCopyNonAtomic(PRnd2, (short) 0, signed, (short) 1, (short) 90);
Util.arrayCopyNonAtomic(K1, (short) 0, signed, (short) 91, (short) 16);
Util.arrayCopyNonAtomic(digest, (short) 0, signed, (short) 107, (short) 20);
signed[127] = (byte) 0xBC;
if (!keyStore.cardPrivateKey.isInitialized()) {
CryptoException.throwIt(CryptoException.ILLEGAL_VALUE);
try {
crypto.rsaSigner.init(keyStore.cardPrivateKey, Signature.MODE_SIGN);
crypto.rsaSigner.doFinal(signed, (short) 0, (short) 128, signed, (short) 0);
} catch (Exception e) {
ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
if (!keyStore.selectedPublicKey.isInitialized()) {
CryptoException.throwIt(CryptoException.ILLEGAL_VALUE);
try {
crypto.rsaCipher.init(keyStore.selectedPublicKey, Cipher.MODE_ENCRYPT);
crypto.rsaCipher.doFinal(signed, (short) 0, (short) 128, signed, (short) 0);
} catch (Exception e) {
ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
apdu.setOutgoing();
Util.arrayCopyNonAtomic(signed, (short) 0, buffer, (short) 0, (short) 128);
return (short) signed.length;
private void processExternalAuthenticate(APDU apdu) {
short equipmentType = 0;
if (keyStore.Selected_Cert != null) {
equipmentType = (short) keyStore.Selected_Cert.CHA[6]; // check equipment type
if (equipmentType != (short) 1 && equipmentType != (short) 2 && equipmentType != (short) 3 && equipmentType != (short) 4 && equipmentType != (short) 6) {
ISOException.throwIt(ISO7816.SW_FUNC_NOT_SUPPORTED); // Instead of 6F00 throw a more meaningfull SW in case CHA is not valid.
if (Util.arrayCompare(keyStore.Selected_Cert.CHA, (short) 0, TACHOGRAPH_AID, (short) 0, (short) 6) != 0) {
ISOException.throwIt(ISO7816.SW_FUNC_NOT_SUPPORTED);
byte[] buffer = apdu.getBuffer();
byte p1 = (byte) (buffer[OFFSET_P1] & 0xff);
byte p2 = (byte) (buffer[OFFSET_P2] & 0xff);
if (p1 != 0 || p2 != 0) {
ISOException.throwIt(SW_WRONG_P1P2);
short lc = (short) (buffer[OFFSET_LC] & 0xFF);
if (lc != (short) (128)) {
ISOException.throwIt(SW_WRONG_LENGTH);
if (apdu.setIncomingAndReceive() != lc) {
ISOException.throwIt(ISO7816.SW_WRONG_DATA);
Util.arrayCopyNonAtomic(buffer, OFFSET_CDATA, signed, (short) 0, (short) 128); // receive the cryptogram from the VU
// decrypt the encrypted message with the card private key
try {
crypto.rsaCipher.init(keyStore.cardPrivateKey, Cipher.MODE_DECRYPT);
crypto.rsaCipher.doFinal(signed, (short) 0, (short) 128, signed, (short) 0);
} catch (Exception e) {
ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
// verify the signature with the VU public key
try {
crypto.rsaCipher.init(keyStore.selectedPublicKey, Signature.MODE_VERIFY); // Cipher.MODE_ENCRYPT
crypto.rsaCipher.doFinal(signed, (short) 0, (short) 128, signed, (short) 0);
} catch (Exception e) {
ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
if (signed[0] != (byte) 0x6A || signed[127] != (byte) 0xBC) {
ISOException.throwIt(Util.makeShort(signed[0], signed[127]));
try {
verifyCardCertificates();
Util.arrayCopyNonAtomic(signed, (short) 1, preDigest, (short) 0, (short) 106); // accumulate preDigest
Util.arrayCopyNonAtomic(Rnd3, (short) 0, preDigest, (short) 106, (short) 8); // accumulate preDigest
Util.arrayCopyNonAtomic(keyStore.Card_Cert.CHR, (short) 0, preDigest, (short) 114, (short) 8); // accumulate preDigest
Util.arrayCopyNonAtomic(signed, (short) 91, K2, (short) 0, (short) 16); // receive K2 value
crypto.shaDigest.update(signed, (short) 1, (short) 106); // PRnd4||K2
crypto.shaDigest.update(Rnd3, (short) 0, (short) 8); // Rnd3
crypto.shaDigest.doFinal(keyStore.Card_Cert.CHR, (short) 0, (short) 8, digest, (short) 0); //||Card.CHR
} catch (Exception e) {
ISOException.throwIt(SW_TAMAM);
if (Util.arrayCompare(signed, (short) 107, digest, (short) 0, (short) 20) != 0) {
ISOException.throwIt(SW_TAMAM);
volatileState[0] |= MUTUAL_AUTHENTICATED;
try {
DTUtil.xor(K1, (short) 0, K2, (short) 0, KaKb, (short) 0, (short) 16);
Util.arrayCopyNonAtomic(Rnd3, (short) 4, SSC, (short) 0, (short) 4); // tail of Rnd3
Util.arrayCopyNonAtomic(Rnd1, (short) 4, SSC, (short) 4, (short) 4); // tail of Rnd1
} catch (Exception e) {
ISOException.throwIt(SW_TAMAM);
try {
keyStore.setKey_Ka(KaKb, (short) 0);
keyStore.setKey_Kb(KaKb, (short) 8);
keyStore.setSecureMessagingKeys(KaKb, (short) 0, KaKb, (short) 0);
} catch (Exception e) {
ISOException.throwIt(SW_TAMAM_DEGIL);
return;
private short returnPreDigest(APDU apdu) {
byte[] buffer = apdu.getBuffer();
apdu.setOutgoing();
Util.arrayCopyNonAtomic(preDigest, (short) 0, buffer, (short) 0, (short) 122);
return (short)preDigest.length;
private short returnDigest(APDU apdu) {
byte[] buffer = apdu.getBuffer();
apdu.setOutgoing();
Util.arrayCopyNonAtomic(digest, (short) 0, buffer, (short) 0, (short) 20);
return (short)digest.length;
private short returnOriginalText(APDU apdu) {
byte[] buffer = apdu.getBuffer();
apdu.setOutgoing();
Util.arrayCopyNonAtomic(signed, (short) 0, buffer, (short) 0, (short) 128);
return (short)signed.length;
private void processVerify(APDU apdu) { // Verify_CHV(Pin_Ws)
byte[] buffer = apdu.getBuffer();
// retrieve the PIN data for validation.
byte byteRead = (byte) (apdu.setIncomingAndReceive());
// the PIN data is read into the APDU buffer
// at the offset ISO7816.OFFSET_CDATA the PIN data length = byteRead
if (pin.check(buffer, ISO7816.OFFSET_CDATA, byteRead) == false) {
ISOException.throwIt(SW_VERIFICATION_FAILED);
return;
private void processPSO(APDU apdu) { // verify certificate
byte[] buffer = apdu.getBuffer();
byte p1 = (byte) (buffer[OFFSET_P1] & 0xff);
byte p2 = (byte) (buffer[OFFSET_P2] & 0xff);
short lc = (short) (buffer[ISO7816.OFFSET_LC] & 0xFF);
if (p1 == (byte) 0x00 && p2 == P2_VERIFYCERT) {
if (lc != TACHO_CERT_LENGTH) {
ISOException.throwIt(SW_WRONG_LENGTH);
if (apdu.setIncomingAndReceive() != lc) {
ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
try { // copy the certificate to be verified from APDU buffer to cert object
Util.arrayCopyNonAtomic(buffer, OFFSET_CDATA, cert, (short) 0, lc);
} catch (Exception e) {
ISOException.throwIt(SW_TAMAM);
if (Util.arrayCompare(keyStore.selected_KID, (short) 0, keyStore.ERCA_KID, (short) 0, KID_LENGTH) == 0) {
keyStore.VUCA_Cert.verifyCert(cert, keyStore.selectedPublicKey, keyStore.selected_KID);
} else if (Util.arrayCompare(keyStore.selected_KID, (short) 0, keyStore.VUCA_Cert.CHR, (short) 0, KID_LENGTH) == 0) {
keyStore.VU_Cert.verifyCert(cert, keyStore.selectedPublicKey, keyStore.selected_KID);
} else {
ISOException.throwIt(SW_CERT_VERIFICATION_FAILED); // Selected keyId, with MSE, is neither ERCA_KID nor VUCA_KID
} else {
ISOException.throwIt(SW_CERT_VERIFICATION_FAILED);
return;
private short processGetChallenge(APDU apdu, boolean protectedApdu) {
byte[] buffer = apdu.getBuffer();
byte p1 = (byte) (buffer[OFFSET_P1] & 0xff);
byte p2 = (byte) (buffer[OFFSET_P2] & 0xff);
if (p1 != 0 || p2 != 0) {
ISOException.throwIt(SW_WRONG_P1P2);
random.generateData(Rnd3, (short) 0, (short) 8);
short Le = apdu.setOutgoing();
if (Le != (short) 8) {
ISOException.throwIt(SW_WRONG_LENGTH);
Util.arrayCopyNonAtomic(Rnd3, (short) 0, buffer, (short) 0, (short) 8);
return Le;
private void processMSE(APDU apdu) {
byte[] buffer = apdu.getBuffer();
if (buffer[OFFSET_P1] == (byte) 0xC1 && buffer[OFFSET_P2] == P2_DST) {
short lc = (short) (buffer[OFFSET_LC] & 0xFF);
if (lc != (short) (KID_LENGTH + 2)) {
ISOException.throwIt(SW_WRONG_LENGTH);
if (apdu.setIncomingAndReceive() != lc) {
ISOException.throwIt(ISO7816.SW_WRONG_DATA);
if (buffer[OFFSET_CDATA] != (byte) 0x83) {//check the tag of the data
ISOException.throwIt(SW_SECURE_MESSAGING_DATA_OBJECTS_MISSING);
} else if (buffer[OFFSET_CDATA + 1] != (byte) 0x08) {
ISOException.throwIt(SW_INCORRECT_DATA_OBJECT); // check if the key is already selected one
} else if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + 2), keyStore.selected_KID, (short) 0, KID_LENGTH) != 0) {
if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + 2), keyStore.ERCA_KID, (short) 0, KID_LENGTH) == 0) {// KID is EUR_KID
keyStore.selected_KID = keyStore.ERCA_KID;
keyStore.selectedPublicKey = keyStore.eurPublicKey;
keyStore.Selected_Cert = null; // ERCA public key is selected
return;
} else if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + 2), keyStore.VUCA_Cert.CHR, (short) 0, KID_LENGTH) == 0) {// KID is MSCA_KID
keyStore.Selected_Cert = keyStore.VUCA_Cert;
} else if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + 2), keyStore.VU_Cert.CHR, (short) 0, KID_LENGTH) == 0) { // KID is VU_KID
keyStore.Selected_Cert = keyStore.VU_Cert;
} else {
ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
}// KID not found
keyStore.selectedPublicKey = keyStore.Selected_Cert.publicKey;
keyStore.selected_KID = keyStore.Selected_Cert.CHR;
} else { // if the KID is already set, just return
return;
} else {
ISOException.throwIt(ISO7816.SW_WRONG_P1P2);
private void processSelectFile(APDU apdu) {
byte[] buffer = apdu.getBuffer();
short lc = (short) (buffer[OFFSET_LC] & 0x00FF);
// retrieve p1p2 from apdu buffer
byte p1 = buffer[OFFSET_P1];
byte p2 = buffer[OFFSET_P2];
short p1p2 = Util.makeShort(p1, p2);
apdu.setIncomingAndReceive();
if (p1 == 4) {
if (lc == (short) TACHO_AID_LENGTH) {
if (Util.arrayCompare(buffer, (short) OFFSET_CDATA, TACHOGRAPH_AID, (short) 0, (short) TACHO_AID_LENGTH) == 0) {
selectedFile = fileSystem.getDT();
fileSystem.selectDT();
volatileState[0] |= FILE_SELECTED;
return;
} else {
ISOException.throwIt(ISO7816.SW_WRONG_DATA);
} else if (lc != 2) {
ISOException.throwIt(SW_WRONG_LENGTH);
short fid = Util.getShort(buffer, OFFSET_CDATA);
if (fileSystem.getFile(fid) != null) {
selectedFile = fileSystem.getDT();
fileSystem.selectDT();
volatileState[0] |= FILE_SELECTED;
return;
} else if (p1 == 2) {
if (lc != 2) {
ISOException.throwIt(SW_WRONG_LENGTH);
short fid = Util.getShort(buffer, OFFSET_CDATA);
if (fileSystem.getFile(fid) != null) {
selectedFile = fileSystem.getFile(fid);
volatileState[0] |= FILE_SELECTED;
return;
} else {
ISOException.throwIt(ISO7816.SW_WRONG_P1P2);
setNoFileSelected();
ISOException.throwIt(ISO7816.SW_FILE_NOT_FOUND);
public static void setNoFileSelected() {
if (hasFileSelected()) {
volatileState[0] ^= FILE_SELECTED;
public static boolean hasFileSelected() {
return (volatileState[0] & FILE_SELECTED) == FILE_SELECTED;
public static boolean hasMutuallyAuthenticated() {
return (volatileState[0] & MUTUAL_AUTHENTICATED) == MUTUAL_AUTHENTICATED;
static boolean isLocked() {
return (persistentState & LOCKED) == LOCKED;
public boolean isSelectedFileEncrypted() {
return ((selectedFile.getAccessConditions() & DigitalTachograph.ENCRYPTED) == DigitalTachograph.ENCRYPTED);
} -
Using ale u can send from sap to sap and sap to non sap systems
hi,
using ale u can send from sap to sap and sap to non sap systems,
then what is diff b/w ALE and EDIHello KALYAN KUMAR,
Application Link Enabling (ALE)
1.You distribute data using ALE if you want to communicate from one system to one or more other (mostly internal) systems.
2.ALE transfers data in IDoc format and uses the methods of tRFC for data transfer.
3.ALE enables the integration of business processes across several SAP or non-SAP systems.
Electronic Data Interchange (EDI)
1.You use EDI if you want to exchange business application documents with an (external) partner system (for example, a customer or vendor).
2. The SAP system sends EDI messages in IDoc format to an EDI subsystem, where they are converted to a universal EDI standard (UN/EDIFACT or ANSI/X12).
3. This enables communication with non-SAP systems.
By definition, two partners are involved in the process in an EDI application scenario: The sender and the recipient of an EDI message
I hope u understands the difference:) -
I live in Iran
Yesterday I wanted to use iTunes store for windows ; when i have open iTunes it gives me the error 0x80090318 .
I have search the web alot and i have check lots of Iranian and English website but have not find any solution for
this problem . Today I have find a software called "Hide my IP" i have opened up that
when this software was opened , itunes have said "iTunes can't verify the identify of the server "init.itunes.apple.com"".
then i have click on "continue" then iTunes said "iTunes could not connect to the iTunes Store. An unknown error occurred (310)."
And theres a matter that i think that have a connection with this topic and thats , that when i want to go to the lots
of websites like Google Yahoo! Mail and lots of other website my both browser ( FireFox and IE ) will say" This connection is untrusted " .
I think the solution of my second problem is the solution of my first problem too !Tried all the rest on this site did not work for me
Follow the link below & this one sorted it for me, it was a conflict in programs using Winsock & I got rid of my old program,
Sorted.
http://support.apple.com/kb/TS4123
Tom Ireland -
iMac, Model Identifier iMac12,1 with 121.5" screen, 2.8 GHz Intel Core i7 processor, 8 GB 1333 MHz DDR3 memory, 1 TB internal hard drive, running Snow Leopard 10.6.8 from internal drive.
I want to install Yosemite onto a 1 TB external hard drive (OWC) , and keep Snow Leopard installed on the internal hard drive. I want to be able to boot from either system, depending upon circumstance (at least until Yosemite is stable). Is this possible?It is possible. I'll let you read some articles that cover the setup:
Starting from an external USB storage device (Intel-based Macs) - Apple Support
or
http://osxdaily.com/2013/06/22/boot-mac-external-drive/ -
My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software. I purchased a new external drive with 3 TB and wonder if I will run into a problem installing it. I don't know how to transfer my files from the previous HD to the New one. I was told to use a cable, but how do I do it? Do I connect them both to the computer and drag the old into the new? How is it done? Why did this happen, the overloading of the Time Machine?
Why has the TimeMachine drive run out of space?
With the limited amount of information you've provided it is hard to answer this question. TimeMachine should continue making backups until the drive is full and then it should erase the oldest backup(s) to retrieve enough space for the next backup. Unless your computer's hard drive has close to 1TB of space on it, you shouldn't see a message saying TM cannot backup because it is full. However if you do have more than 500GB (1/2 a TB) then I can see how that message might occur. Also, if you are using the TM drive for double duty (backing up more than one computer or storing data other than TM) you could get that message.
Will you have this problem with a 3TB drive?
I always recommend that people look at how much they'll be backing up in total, add a bit extra for the future, and then multiply that by at least 1.5 and even better to double it. That indicates how large the TM backup drive should be. The TM drive should only be used for TM backups. It is ok to use one drive to back up more than one computer but if doing so, add up the contents of all the computer drives, adjust for the future and then double it.
Moving Forward
Disconnect the old TM drive for now. Connect the new drive and let TM do its job. I don't recommend that you try to transfer the TM backup from the old drive to the new one. Keep the old drive around for a couple months just in case you find you need it and then after a few months, if you like, you can erase it and use it for something else. -
Our iMac (intel, 11.2) freezes up when using Time Machine for Back Ups. We have 16GB of RAM and the BU drive is 1 TB on firewire.
See Pondini's TM FAQs for starters.
-
When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card. I have tested with both 1.0.3 and 1.0.5 clients with RabbitMQ 3.1.5.
I was wondering if the community was aware of this problem and if there are any workarounds? If not what is the proper channel to file a bug report. An example code snippet is below. The test fails because the TextMessageMatcher expects the destination passed in on construction (second parameter) to equal the desination on the message received (aquired from getJMSDestination).
Mockery context = new Mockery();
final MessageListener messageListener = context.mock(MessageListener.class);
final Latch latch = new LatchImpl();
final String prefix = "test" + System.currentTimeMillis();
context.checking(new Expectations() {
oneOf(messageListener).onMessage(with(new TextMessageMatcher("MSG1", prefix + ".1234")));
will(new CustomAction("release latch") {
@Override
public Object invoke(Invocation invocation) throws Throwable {
latch.unlatch();
return null;
final Connection connection = createConnection(null, null);
Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
connection.start();
Topic wildcardTopic = (Topic) getInitialContext().lookup(prefix + "." + "#");
Topic destination = (Topic) getInitialContext().lookup(prefix + ".1234");
final MessageConsumer consumer = session.createConsumer(wildcardTopic);
consumer.setMessageListener(messageListener);
MessageProducer producer = session.createProducer(null);
producer.send(destination, session.createTextMessage("MSG1"));
latch.await(5000);
connection.close();
Thread.sleep(5);
context.assertIsSatisfied();Check where your MDB sends the [response] messages to.
-
If I use this migration by ethernet from a macbook pro to an imac will the original macbook pro still have the original data
Yes.
-
So I have been using my iPad for a few months now and I recently noticed that the time display next to the playlist name in the music app that is supposed to display the total song count and time of a playlist is way off. I have a 25 song playlist that is around 2 hours on my computer appears as 2003 minutes on my iPad. It's a smart playlist limited to 25 songs if that makes any difference. Is this happening to anyone else? Any help would be appreciated!
Greetings,
First make an iCal backup, File > Export > Archive.
Remove the following to the trash and restart your computer:
Home > Library > Caches
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
__NOTE: Removing these files will remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Once the computer is back up and running open iCal and test.
Hope that helps. -
i'm forced to use a xoom for work. Is there any way of installing android ICS via virtual machine or any other mechanism?
On the iPad? No.
-
Can I use debit card for purchasing from iTunes in India?
Can I use debit card for purchasing from iTunes in India?
Hi
There is a small discussion that iTunes takes debit card with a Visa/Mastercard logo. I have no idea what the banking rules are in India. But this may another option to try.
https://discussions.apple.com/thread/3658843?start=0&tstart=0
Cheers
Maybe you are looking for
-
i can no longer connect to itunes. a message comes up "we could not complete your itunes request. The itunes store is temporarily unavailable. please try again later. but when i use a different acct. it goes through right away . why did this start ha
-
I am kind of embarassed to ask this question, but I have to. Where do I find xorg.conf? Do I even have such a file? It is not in /etc/X11. When I installed Xorg, I also installed hal and then added it to module list in rc.conf. Does hal just detect m
-
Having trouble syncing to ITUNES
I am a new IPHONE user. Loaded ITUNES but I am having trouble connecting/syncing my IPHONE.
-
FAST ESP 5.3 - is the FAST Search API of ESP 5.3 compatable with OS: Red Hat 5.1 & JDK: 1.6 Update 81 ?
-
i know the first thing that you guys will think is that i need to change my security preferences to where i can download programs from anywhere but thats not the case... when i go to try to install a new program i double click on the installer and i