HT1338 after upgrading to Mountain Lion the HP printer drivers for my C4680 are not found on the Mac store (per my Mac Book)

My computer cannot install a printer after I upgraded to Mountain Lion. I have downloaded the HP printer drivers from the Mac Store. I click on add printer on Print and scan, the printer is connected via USB. I get a message that the drivers on not on Mac Store and cannot be installed.

True, not part of the list.
An older printer? You can only try contacting HP. Note that Apple is only the "distributor" of these drivers; HP as the vendor develops them. Or not...

Similar Messages

HT1338 After upgrading to Mountain Lion iphoto doesn't work

Can't open my iphoto after upgrading to Mountain lion. Goes up to step 2 at 54% and crashes. Please help!

You can't run Windows on a Mac unless you use BootCamp or a third-party utility such as Parallels Desktop.
Perhaps you mean Microsoft Word (which is part of the MSOffice suite).
Only MSOffice 2008 and later will run in Mountain Lion.
However there are very good free alternatives, such as LibreOffice.

After upgrading to mountain lion no contacts says no cards

After upgrading to Mountain Lion when I go into Contacts, no contacts are displayed. It says no cards. One solution I found on this site says to go into libraries and then the Application Support folder and delete the address book there and then restart the computer. I don't have Address Book listed in the Application Support folder. Any ideas?

The OS on your Mac has nothing to do with behavior of email on your iPhone. The only thing I can imagine is that Mail on your Mac may be receiving messages and marking them as "read" before your iPhone has a chance to receive them. What kind of email account are you talking about here!

After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I don't seem to have the "com.apple.garageband.plist" file that has been a common solution. Any suggestions?

After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I've read through several posts that all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist. Any solutions or suggestions?

Did you upgrade from SnowLeopard?
I can't get passed the complete installation
What exactly is happening? Is GarageBand trying to download over and over again?
all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist.
The property list stores your preferences, but also the settings from the last run of the application. If that file is corrupted in some way, you might see third behaviour.
You must have this file, for it will be recreated automatically, if it is missing, or you have a permissions problem with your user library.
Perhaps you did look in he wrong place.
in MacOS 10.7. or later the User Library is hidden. To find the Preferences Files use the Finder's "Go" menu:
Quit GarageBand, if it is running.
Click onto you Desktop to bring the Finder forward.
In the Finder Menu press "Go" and hold down the "option/alt" key, until your user library appears in the drop-down menu
Select "Library" and in the Finder window that opens navigate to the "Prederences" folder; move com.apple.garageband.plist to the Desktop.
Log off and on again (don't skip that step!). Retry GarageBand and see if it GarageBand is now downloading the missing content properly.
If that does not fix the problem, post back and explain in more detail what the download problem is.
Why did you "repurchase" GarageBand? If you already owned GarageBand '11, it should be unnecessary.
Regards
Léonie

After upgrading to Mountain lion the hyperlink button is not seen in Preview. Anyone knows ho to get it back?

After upgrading to Mountain lion the hyperlink button is not seen in Preview. Anyone knows ho to get it back?

Augend wrote:
After upgrading to Mountain lion the hyperlink button is not seen in Preview. Anyone knows ho to get it back?
There have been a few threads about this. The feature seems to have gone missing in Mountain Lion even though the Help for Preview still mentions it.
I've filed a bug report on it.
Matt

After upgrading to mountain lion, the movies I create using iDVD periodically stop then resume abruptly when I play them back on my DVD player. Any ideas on correcting this?

After upgrading to mountain lion, the movies/slideshows I create using iDVD playback in a jolting start/stop manner. This didn't happen with the prior os - playbacks were flawless. Any ideas, short of uninstalling mountain lion, on how to correct?

I know this is not much help. IDVD and Mountain Lion are working perfectly for me. I know many others that use Mountain Lion with iDVD also.
I think your problem lies elsewhere.

After upgrading to Mountain Lion my 2009 (early 2010) iMac mutes audio when awaking or when it goes to sleep. Anybody else having the problem?

After upgrading to Mountain Lion my 2009 (early 2010) iMac mutes audio when awaking or when it goes to sleep. Anybody else having the problem? My other iMacs are not having that problem. I'm not sure if I am missing an option somewhere or what is going on.

http://www.reedcorner.net/understanding-upgrade-nightmares/ (Thomas)
See if you have supported applications > http://www.roaringapps.com

The Airplay Icon is not showing up on My Taskbar After Upgrading to Mountain Lion

Please help. I have 2nd generation Apple TV and a 2011 Imac but the Airplay Icon will not show up on Taskbar after upgrading to Mountain Lion.

Finally after trying to uninstall/reinstall (no luck!)
I'm on Windows 7 64 bit. iTunes 10.7 And I have a solution:
If found a thread about IPv6.
I followed the same directions on Windows 7 64 bit and it worked.
Disable IPv6 on _all_ of your IP ethernet adapters.
That includes Virtual Machines (VMWare... yes those too), including IPv6 for wireless.
Close iTunes. Start iTunes. Works. Airplay Icon is back.
It looks like All of the AirPlay devices may have to be re-setup. At the very least rebooted.
I found that I had to clompletely erase my DHCP addresses from my (non Apple) router.. and that fixed it. Finally.
Even though this is for the Mac... I believe they are onto something. Original thread link:
http://mactips.dwhoard.com/mactips/other-applications/fix-airplay

My name now appears on the upper right hand corner of my display after upgrading to mountain lion.. is there a way to get rid of that?

my name now appears on the upper right hand corner of my display after upgrading to mountain lion.. is there a way to get rid of that?

In System Preferences > Users & Groups > Login Options (below the list) > click the padlock and authenticate > Uncheck Show fast user switching menu as: or you can change it to icon.

After upgrading to Mountain Lion on my 2011 27" iMac, my Mac occasionally lock-ups.

After upgrading to Mountain Lion on my 2011 27" iMac, my Mac occassionaly locks up while using Safari, Mail or Dreamweaver and I have to d a force-quit, then restart my Mac. Anybody having similar probelms?
I am thinking about doing a clean install of Mountain Lion. Would I be able to restore my applications and data from Time Machine after the re-install?

My 24 inch iMac... 2.8 GHZ dual core (Early 2008) is having the same problem. After it sleeps, I go to use something... and the beachball of death occurs. This happens multiple times a day... and let me tell you... it is annoying... and I am the one who is being annoyed!
It could possibly be revolving around safari... as that is really the only thing that is running consistently. I don't use iTunes on this iMac as I have so many other Macs up and running in the house... and I never consume media on it... so I kind of dismiss iTunes being the culprit.
This is majorly affecting my Mac... in terms of reliability and uptime... which coincedently is the main reason why I switched to Mac in 2008. This is my only Mac that could upgrade to ML... so I don't know how widespread this is... but I hope that this problem can be solved...
I agree with another person who commented on this issue... do we really need a 10.8.1 update already... to fix this?

After upgrading to Mountain Lion my Mac Book pro takes 1min 15 to load sec to open, never took that long.

after upgrading to Mountain Lion my Mac Book pro takes 1min 15 to load

Apple made some changes to increase security that slowed the boot time.
Startup - Slow Boot
Startup - Slow Boot (2)
Startup - Slow Boot (3)

After upgrading to Mountain Lion, I cannot open my File Maker Pro files. Can I use Numbers to open these files?

After upgrading to Mountain Lion, I cannot open my File Maker Pro files. Can I use Numbers to open these files?

Numbers is a spreadsheet program and FileMaker is a database program, so you probably can't use Numbers to open them unless you had first exported them from FileMaker in a spreadsheet-compatible format.
If you upgraded from 10.6 Snow Leopard or earlier and your old copy of FileMaker won't open anymore, it might be a PowerPC application that is not compatible with 10.7 and later. If that is the case, to work with your FileMaker files you should upgrade your copy of FileMaker to the latest version, which seems to be FileMaker 12.

After upgrading to Mountain Lion from Lion, Mail, Safari and note need about five minutes to start.

After upgrading to Mountain Lion from Lion, Mail, Safari and Note need about five minutes to start.
After starting, Mail answers are very very slow. The same for Note. Instead of, sending mails is only a bit slower than before upgrading.
In Safari, I choose Goggle as starting page in Preferences, but at every restart misses that starting page and the search strip says "Seek Google or instert an address".

Well, I found the solution here in another thread.
i just want to mention that the samw thing was happening also for the notes and the reminders apps!! (they quit unexpectedly!!).
So I found the solution here.
Thank you graphicsluc!!!

After upgrading to Mountain Lion 10.8.2, I cannot print to my Samsung laser printer ML 2525w? How can I get this set up to print?

After upgrading to Mountain Lion 10.8.2 on my iMac, I cannot print to my Samsung B&W Laser printer ML 2525W either by USB or wireless. Any help on how to setup or reconfigure would be apprecaited.
I either print blank pages or prints one time then goes off line, or spits out a bunch of blank paper, etc. Have gone through all the standard fixes, reboot, reset , reload driver, etc.

From the link to the Thread you provided, I worked through the one message procedures that were listed.
For ease of reference, I have copied them and printed them below. This was an old thread but the guidance still works with no firmware upgrade required.
I would stress that you MUST delete any and all files relating to USB connection of the printer to the MAC, including all print drivers (from both Apple and Samsung either from CD or web downloads) and all print queues, etc. I was only able to get the printer to properly hand shake with my Mac by setting it up wirelessly after all old files were deleted with hard power off reboots on both the Mac and Printer.
I hope that someone from Apple will pass this note along to their programing department because there is some type of incompatibility in the new ML OS and the Samsung ML2525w print dirvers used for a cable (USB) type connection. Apple needs to be talking to Samsung to get the USB issue resolved. I am going to post this same message on the Samsung site to see if someone from there will contact Apple to work together on a final solution for USB connectivity.
Here is the steps I followed to get my ML2525w to work in the wireless mode. Again, I cannot stress the need to clean out all the old files (drivers, print queues, etc. - everything) before setting up wirelessly.
As a note, I ran this printer with Lion for almost 2 years and it always worked fine (both wireless and USB). From other comments on the thread, users were good with this printer using Lep. and Snow Lep also. - - no issues from either a USB connection or wireless until Mountain Lion.
Before the fix, I was experiencing many of the same issues as described on user chat threads, printer going offline after a print job. 1st page sometimes printing but all the rest of the pages were garbage. No printing at all. Printer just running a bunch of blank pages out. etc.
I run an iMAC 27" desktop with the ML OS upgrade just installed from Lion.
"I've just installed one of these printers for my parents.
First of all, don't waste your time connecting the ML-2525W as a USB printer. The printer will go offline after each print job. It's hopeless, at least (I assume) until Samsung gets around to publicly releasing a firmware update.
Instead, you have to use the ML-2525W as a wireless printer. In that mode, it works fine.
This is what I did:
(1) First, if you have already attempted to install the Samsung driver software from the included CD-ROM, uninstall it. Get the uninstaller from the Samsung support site:
http://www.samsung.com/us/support/downloads/ML-2525W
Download the "Printer Driver (ver. 4.0)" ZIP file. It unzips to a folder that contains the uninstaller. Likewise, download the "Smart Panel Driver" ZIP file and uninstall the Smart Panel software.
(2) Disconnect the USB cable from the printer, if it is connected. Pull the power plug on the printer and power cycle it.
(3) Restart your Mac.
(4) Go to the "Printer Driver (ver. 4.0)" folder that you previously unzipped. Inside it is a folder named "WirelessSetting". Open the folder and run the "Wireless Setting.app".
(5) The application will ask you to connect the USB cable to the printer. Do so, and the Mac should be able to communicate with the printer to perform the wireless setup.
(6) The application will show you a list of wireless networks. One of them is the wireless interface in the printer (ad-hoc). You can ignore that unless you intend to use the printer without connecting to another wireless network. In my case, I selected the wireless network in my parents' home (infrastructure) and entered the security passphrase. The application then configured the wireless interface in the ML-2525W to connect to the home network.
(7) The Wireless Setting application will then tell you to disconnect the USB cable.
(8) After finishing the Wireless Setting application, go to Word, Textedit, Pages, or Safari, and select a file or page to print. In the print dialog window, you should see the ML-2525W as a "Nearby Printer" (i.e. via Bonjour). Select the ML-2525W, and your Mac will automatically connect to Apple's Software Update and download the latest Samsung driver. If for any reason the Software Update download does not succeed, you can manually download and install the Apple driver using the previously published link in this discussion.
(9) After that, you should be able to print to the ML-2525W whenever you want, without the printer going offline.
(10) If you have a USB printer queue still in your Print & Fax Preferences (from your previous unsuccessful attempt to connect via USB), you can delete it. You only need to keep the Bonjour queue.
Obviously YMMV, but in my case this procedure got the printer working reliably without the need for a firmware update."
MacBook (white 12"), Mac OS X (10.6.5)

After upgrading to mountain lion, i cannot play any video at all, be it directly off a DVD, or through streaming like youtube, BBC iplayer or even off my iTunes library

after upgrading to mountain lion, i cannot play any video at all, be it directly off a DVD, or through streaming like youtube, BBC iplayer, love film or even directly off my iTunes library. in each case, all i get is a black screen and no error message.

Hi, i had the same problem and tried this,
Somehow iTunes is tied to Safari. Try this:
Someone mentioned to clear all website data and history in safari, stupid but it was either this or the below that fixed it
or this,
Disable Wi-Fi Networking Services
Many users have reported that they’ve solved their issues by disabling Wi-Fi Networking under Settings > Privacy > Location Services > System Services. This only relates to your location being used for Wi-Fi Networking, so it doesn’t disable Wi-Fi entirely.
Please let me know if it works.

HT1338 after upgrading to Mountain Lion the HP printer drivers for my C4680 are not found on the Mac store (per my Mac Book)

Similar Messages

Maybe you are looking for