HT1338 How do I get a driver for my Epson Stylus Photo 1400 so that it will run with Mountain LIon?  I tried "Software Update" and says "no update available"

How do I get a driver for my Epson Stylus Photo 1400 so that it will run with Mountain LIon?  I tried "Software Update" and says "no update available".  I contacted Epson and was told all driver updates had to be obtained using "Software Update"?

You will find the latest Epson drivers herehttp://support.apple.com/kb/DL1398.
If you don't find a driver for your printer in the above, then install the Gutenprint drivers. It supports your model.

Similar Messages

  • What's the best driver for an Epson Stylus Photo R260 printer?

    After the last couple of driver updates for Mavericks, my printer won't print just black although it is using the black ink to shade colors darker. I previously used another driver but didn't buy it after the trail period was up but now I'm getting desperate. Unfortunately, I can't remember that driver's name. Does anyone have a suggestion for a driver for an epson stylus photo r260 inkjet?

    How are you trying to set the print to just black? Are you setting the color to Grayscale under Print Settings in the Print window?
    Should be the same for the 260 as the 280. 

  • Does maverick have a driver for the Epson stylus photo R1900, Does maverick have a driver for the Epson stylus photo R1900

    I tried first with Epson but they referred me to Apple. My printer is Epson stylus photo R1900, I am interested in instaling Maverick

    Hi,
    I am not sure if the Printer is compatible with Mavericks, but found the Drivers for the Epson Stylus Photo R1900 Ink Jet Printer in Epson Official Website. You can go through the below link
    https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=94511&BV_UseBVCook ie=yes&infoType=Downloads&platform=OSF_M_X9

  • How do I get a driver for KONICA MINOLTA C250 UV2.0.0 that worka with os 10.6.

    Where do I find a driver for KONICA MINOLTA C250 UV2.0.0 that works with os 10.6.7 on my MBP

    I googled, "C250" and come up with this web site:
    http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=831&fil etypeid=0
    scroll 3/4 down the page. It's there. You can google too.

  • Does anybody know how to modify the driver for the Tektronix 370A curve tracer so that it will work with the 370B?

    I am trying to control a Tektronix 370B curve tracer using LabView via a GPIB interface. However, there are no drivers available for download for the 370B. There is one available for the 370A, but it is not compatible with the 370B and I have been unable to figure out how to modify it to make it work with the 370B. Does anyone know how to modify this driver, or know of an existing driver that works with the 370B? Thanks!

    Hi S _Bracht,
    Yeah, unfortunately, the Tektronix 370B does not currently have an instrument driver and the driver for the 370A is not supported by National Instruments (it is just posted on our website as a courtesy) - so I am afraid that there is not really any more information on the differences that might exist between the two available from National Instruments.  As an alternative, you can always develop your own driver using the VISA and 488.2 drivers + a copy of the user manual for the Tektronix 370B.  Otherwise, you may consider speaking with Tektronix or getting ahold of a User Manual for the 370A and comparing some of the settings - there are likely some differences in your configuration options at the very least.  Or, if someone out there has tackled this before and shares their knowledge...
    Good luck! 
    Regards,
    Anna M.
    National Instruments

  • How can I get a 3.x version back on my MAC so that it will work with my website CMS program?

    I need a 3.x firefox version on my mac so that I can use a website CMS program to update a client's website. Can I have a 3.x version on my mac, as well as the newer 4.0 version?

    The software on the disc is written to run in, and only in, MS Windows. It can't run in the Mac OS. You can either install in on a Windows PC, or install Windows on your Mac and then install the software to run it in Windows.

  • HOW DO I GET A DRIVER FOR MY KODAK PRINTER ESP 3.2 FOR IMAC

    I AM SETING UP MY NEW IMAC, HOW DO I GET A DRIVER FOR MY KODAK PRINTER ESP 3.2

    Kodak has posted an unsupported hack that has been reported to enable printing to a Kodak printer not supported in OS X 10.10 ("Yosemite").
    I have not tested the hack myself. As far as I know it will not break the compatibility of printing software that is already compatible with Yosemite. It may degrade the security of the printing system. It's up to you to decide whether that risk is worth taking.

  • How do I get the driver for an HP 1005 laser jet printer now that I have changed my operating system

    how do I get the driver for an HP 1005 laser jet printer now that I have changed my operating system

    Did you look on the HP website?
    Click the picture to go to the page.

  • HT1904 How can I get a refund for apps in the apple App Store that do not work and are not what they said they wer

    How can I get a refund for apps in the apple App Store that do not work and are not what they said they wer

    You've tried deleting and redownloading them and seeing if they then work and tried contacting the developers ? If you have and they can't/won't help then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How can I install gutenprint drivers for my Epson Stylus Color 440?

    Good day all!
    I have and old and useful printer -Epson Stylus Color 440- and just bougth a cable for connecting it to USB port. Add a new print on its Print and Scan Preference Panel and it was recognized inmediatly, but I was told there was not any driver to that printer.
    Tried to set "Epson Stylus Color Series" on its driver but when I went to print, printer seemed to work but does not eject any ink. It seemed as if I were ran out of ink; its car moved over the places occupied by the photo and sounded as normal printing, but not a drop of ink. I checked on an older windows pc, and ink is full, printed normally. I also looked for its drivers on Epson pages, but it seems there are only available for previos Mac OSs, not for X.
    A son told me that in his Snow Leopard MacBook White there's a dirver called "Epson Stylus Color 440 gutenprint" on his Print and Scan Driver Menu; haven't tried to print from his MacBook yet, and as I searched, those are open drivers.
    I wonder if I can download and install that "Epson Stylus Color 440 gutenprint" from the web, of if there's a way to copy it from my son's Macbook, when he comes and check.
    Thanks in advance for your help.

    How can I install gutenprint drivers for my Epson Stylus Color 440
    Download then isntall:  http://gimp-print.sourceforge.net/

  • Mac os x Lion version 10.7.2 installed Gutenprint for my Epson Stylus Photo 1390. Every time I try to print I get the following error message: cgpdftoraster unsupported colorSpace. Any advice would be helpful thanks.

    Mac os x Lion version 10.7.2 installed Gutenprint for my Epson Stylus Photo 1390. Every time I try to print I get the following error message: cgpdftoraster unsupported colorSpace. Any advice would be helpful thanks.

    I don't think Lion installed it, rather you did. That said System Preferences>Print & Scan. select your Epson printer and then select Options & Supplies>Driver>Print Using>Select print Software. Then scroll down to the driver you want to use.

  • HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

    Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

    It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
    You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
    Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

  • Upgraded to Mountain Lion and CS3, I am no longer able to access the correct dialog box for fine printing with Epson Stylus Photo 1400.

    I have recently upgraded my Mac OS to Mountain Lion, and am using Photoshop CS3 together with Lightroom 5. To my absolute horror, in either Adobe program I am no longer able to access the dialog box which allows me to choose paper type, size, and print quality when attempting to print on my Epson Stylus Photo 1400. An excruciating hour on the phone with largely unintelligible folks at Epson seemed to prove the problem lies with Adobe instead of Epson. I'd greatly appreciate whatever advice might be forthcoming from the Community.

    Well, this seemed to work.. can't believe it! After a year of messing with this!
    from Stevejones5
    "I found a way around this problem. GO to HD/Library/Printers/Epson/InkjetPrinter/ICCProfiles and you will find a file labeled Pro38.profiles. This is a package file. Control click on it and reveal contents. Then you can copy all the profiles and paste them into your Colorsync folder either in the HD/Library folder or your own Home folder/Library. Then the profiles will show up in Photoshop and Lightroom."
    Key, is to Control click on the printer to "Open contents". Then open Resource folder. Copy everything in it and then paste it into the "Colorsync" folder in your Library.  (Remember, to get to Library you have to hold the command key down for it to appear in "Go" Menu for Finder.
    Then I reinstalled printer driver from Apple, then rebooted computer, then plugged in printer. And VOILA-- I can now select Epson Premium Photo Paper Luster!

  • HT1338 How do I install a driver for the speakers I have connected to the headphone jack?

    How do you install a driver for speakers I have connected to the headphone jack?

    You don't need drivers for speakers in a headphone jack.
    What is the problem?

  • How do I get a driver for my soundblaser? I can't find

    Hi
    Here is my DXDIAG information for my sound card
    -------------Sound Devices------------- Description: SB Audigy Audio [DF80] Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: PCI\VEN_02&DEV_0004&SUBSYS_005802&REV_03 Manufacturer ID: Product ID: 00 Type: WDM Driver Name: ctaud2k.sys Driver Version: 5.2.000.024 (English) Driver Attributes: Final Retail WHQL Logo'd: Yes Date and Size: 4//2002 20:02:00, 83400 bytes Other Files: Driver Provider: Creative HW Accel Level: Full Cap Flags: 0xF5F Min/Max Sample Rate: 4000, 9999Static/Strm HW Mix Bufs: 32, 3 Static/Strm HW 3D Bufs: 32, 3 HW Memory: 0 Voice Management: Yes EAX(tm) 2.0 Listen/Src: Yes, Yes I3DL2(tm) Listen/Src: No, NoSensaura(tm) ZoomFX(tm): No Registry: OK Sound Test Result: Not run
    Description: Modem # Line Playback (emulated) Default Sound Playback: No Default Voice Playback: No Hardware ID: Manufacturer ID: Product ID: 8 Type: Emulated Driver Name: Driver Version: Driver Attributes: WHQL Logo'd: Date and Size: Other Files: Driver Provider: HW Accel Level: Full Cap Flags: 0x0 Min/Max Sample Rate: 0, 0Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, NoSensaura(tm) ZoomFX(tm): No Registry: OK Sound Test Result: Not run
    ---------------------Sound Capture Devices--------------------- Description: SB Audigy Audio [DF80] Default Sound Capture: Yes Default Voice Capture: Yes Driver Name: ctaud2k.sys Driver Version: 5.2.000.024 (English) Driver Attributes: Final Retail Date and Size: 4//2002 20:02:00, 83400 bytes Cap Flags: 0x4 Format Flags: 0xFFF
    Description: Modem # Line Record (emulated) Default Sound Capture: No Default Voice Capture: No Driver Name: Driver Version: Driver Attributes: Date and Size: Cap Flags: 0x20 Format Flags: 0x0
    -----------DirectMusic----------- DLS Path: C:\WINNT\SYSTEM32\drivers\GM.DLS DLS Version: .00.006.0002 Acceleration: Enabled Ports: SB Audigy DirectMusic Synthesizer [DF80], Hardware (Kernel Mode), Output, DLS, Internal, Default Port SB Audigy Audio [DF80], Software (Kernel Mode), Output, DLS, Internal Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal SB Audigy Synth A [DF80] [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal SB Audigy Sw Synth [DF80] [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal SB Audigy Synth B [DF80] [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal Registry: OK Test Result: Not run
    So according to that I have Creative Soundblaster Audigy Audio
    I went to manually find an update for my driver because of this:
    reason for searching for driver -> when I play Splinter Cell: Chaos Theory, when people talk through their microphone on the multiplayer of that game, all i hear is blurry/laggy sound and can hardly make out what they are saying. This happens whenever anyone with a mic on that game talks so it has to be me since alot of people say they hear each other just fine.
    Now I went to find the driver and when i got to audigo it didn't show the next part which is audio, it had stuff like audigy LS etc. but no plain audio.
    Should I be looking for a driver for another soundblaster or something? help please
    Thanks

    Your card is one of these?
    Sound Blaster Audiyg LS (SB032)
    Sound Blaster Audigy MP3+ (SB0090M)
    Sound Blaster Audigy Platinum (SB0090M)
    Sound Blaster Audigy X-Gamer (SB0090G)
    Sound Blaster Audigy (without 394 Connectors) (SB062)
    Sound Blaster Audigy Without the 394 port Var Pack (SB062)
    Sound Blaster Audigy Var Pack W/394 port (SB0092)
    You can check which exact model (SB0xxxy) you have by looking what's printed on card.
    I suppose if you download drivers intended to Platinum you get your drivers updated (If you do not have Audigy LS (SB032). It has it's own drivers).
    .jtpMessage Edited by jutapa on 04-6-2005 04:56 PM

Maybe you are looking for