Compress database in db13 and backint?
Hello all,
The db13 job "compress database" that is running every 4 weeks in an ECC 5.0 system running Oracle 9.2.0.7 with size 180GB is taking 11 hours to complete. I am not sure how much time this is supposed to take, but 11 hours looks excessive to me. SAP recommends running this once a month
In addtion, in the link below,
http://help.sap.com/saphelp_nw04/helpdata/en/0d/d30cec4a0c11d182b80000e829fbfe/frameset.htm
I found (if I read it correctly of course) that if I am using backint to an external backup tool (we are using backint and netbackup here) , then the compress is not needed
Could you please tell me what is the runtime of your compress jobs and if my understanding about compress not needed when backint with netbackup is used is correct?
Many thanks
Andreas
this is right, you do not need to "compress" DB if you use backint.
the "compress" DB only calculates the compression rate for use with BRBACKUP (without backint).
if you use BACKINT, it`s the responsibility of your 3rd party backup software to control compression.
Similar Messages
-
Error while check database in DB13
Hi,
I have scheduled check database in DB13 , I am getting an error as, BR0970W Database administration alert - level: ERROR, type: MISSING_STATISTICS, object: (table) SAPSR3./BEV2/ED970. There are lot of messages found after check database. I am also getting error in verify database in DB13. What could be problem? Please help me with your solutions.....
Regards,
NageshwarThis condition checks to see whether there are tables or indices that do not have any statistics, although they should have them.
The OBJECT field is not specified for this condition.
This condition has no checking operands, threshold values and value units.
Run your DB stats every week -
How to use (Verify database) in DB13.
Dear all,
I tried to use (Verify database) in DB13 but it doesnt works. It says that the instance is up. HOw do I use this option in DB13.
Thanx in advance.
Lalit RanaHello Lalit
Please Try This
For Update Stats - brconnect -u system/12345678 -c -f stats -t ALL
For CheckDB - brconnect -u system/12345678 -c -f check
For CleanuP - brconnect -u system/12345678 -c -f cleanup
system - your SAP System
12345678 - Default Password
please specify your operation system ( For Example if your O/S is Windows - 2003 Server then by Cmd level go to the oracle drive and run this command in command mode )
For example - D: brconnect -u system/12345678 -c -f stats -t ALL
Try It & See -
Hi All,
What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?Hi Jayachander,
Have a look at these sap notes:
For taking backup: Schedule from DB13 and get the exact command from Logs
1841993 - SYB: How to schedule backups in DBA Cockpit
1887068 - SYB: Using external backup and restore with SAP Sybase ASE
How to restore DB
1611715 - SYB: How to restore a Sybase ASE database server (Windows)
Divyanshu -
Difference between " COMPRESS FOR ALL OPERATIONS" and "COMPRESS FOR OLTP"?
I was looking through Oracle's OLTP Table Compression (11g onwards) documentation as well as online resources to find the syntax and came across two different versions:
COMPRESS FOR ALL OPERATIONS
and
COMPRESS FOR OLTP
The documentation I looked through didn't mention any alternative syntax, so i was wondering if anyone here might know the difference.
Thank you!Table Compression Enhancements in Oracle Database 11G Rel1 as as follows:
The compression clause can be specified at the tablespace, table or partition level with the following options:
•NOCOMPRESS - The table or partition is not compressed. This is the default action when no compression clause is specified.
•COMPRESS - This option is considered suitable for data warehouse systems. Compression is enabled on the table or partition during direct-path inserts only.
•COMPRESS FOR DIRECT_LOAD OPERATIONS - This option has the same affect as the simple COMPRESS keyword.
•COMPRESS FOR ALL OPERATIONS - This option is considered suitable for OLTP systems. As the name implies, this option enables compression for all operations, including regular DML statements. This option requires the COMPATIBLE initialization parameter to be set to 11.1.0 or higher. -
Compress database/tablespace
Hi!
We currently do not use compression in our 150GB database (test- and development DB).
However we would like to test this feature to verify whether it is suitable for us.
I already have these statements for table and tablespace compression:
alter table MYTABLE compress;
alter tablespace MYTABLESPACE default compress;
I assume that I will have to reorganize the objects in each tablespace, i.e. move them to the beginning of the datafiles after compression is applied. I can do this using alter table MYTABLE move;
My questions are:
How do I best apply compression to our database? Do have to compress each and every table/index, do I compress each tablespace or can I compress the whole database in a single statement?
Will the tablespace compress statement apply compression only to new objects or will the existing objects also be compressed?
We are on Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options.
Looking forward to your suggestions.
Please let me know if you need further information.Thanks!
We are going to test compression in our test and development environments.
As I now understand it setting the compress-attribute on tables and/or tablespaces will apply compression only on newly inserted rows.
11g is not an option for us at moment, but I will look into that when I have tested compression for 10g.
The link you provided was useful and gave me the needed information.
Again, thanks! -
What does the compress database option actually do in BPC? Is it necessary for every optimization?
I don't think this is a Netweaver version option, but it does occur when you run an optimization.
When you send data to the database to an intersection that already has data, rather than changing the number the system calculates an adjustment to what is in the database to what you want it to be and writes the adjustment.
For example, assume data in the facttable is 2010.JAN,ACTUAL,ENTITY100,ACCT100,100.
If you send data that changes this to 90 then the system actually sends a -10 and now there are two lines in the database.
2010.JAN,ACTUAL,ENTITY100,ACCT100,100
2010.JAN,ACTUAL,ENTITY100,ACCT100,-10
Users don't ever see this, all they see is the 90 amount.
A compression of the database combines these two lines into one so the number of records in the database is reduced.
Kelly -
Problem with database tool kit, and MS Office Tool kit.
One of my programmer's who has the Office tool kit noticed this on Monday, and we haven't been able to find the problem yet.
We use the database connectivity reads and writes to a MS Access database. This program reads the data from a Symbol Scanner, and then inputs it into the database. He then has a query that to create a data table to pump into the MS Toolkit to build a MS World file (This is for a Bill of Lading).
What we found it that it works really well the first time, and on any further runs it will not update the database with any new data. It starts working again if we do a restart on the computer. It seems like something is not freeing up the database. He is freeing all the tables and closing the DB connection at each process, and everything else seems to be doing everything else right. I think the problem is that it goes into this MS Toolkit to make the table that goes on the Bill of Lading.
I did a modification that makes it read from an excel file on my desktop, and I found that it is doing the same thing. I deleted the report generator part of the program, and found that it will update the database properly. I have no clue.
here is the machine specs:
labview 8.6
Database connectivity toolkit 1.0.2
Report generator toolkit MS Office 1.1.3
MS Office 2007, the file is a Office 2003 format,Given that the code still fails when talking to a excel file it sounds like this isn't really related to the database. Can you post a bit of your that shows the problem. Beyond that, be looking for things in the code that change between subsequent interations -- things like shift registers, globals, etc.
On the other hand, the fact that you have to restart the computer would tend to indicate that there is something going on with the MS Office side of things. To be clear: shutting down and restarting LV is NOT sufficient to clear the problem?
When the problem is occurring, if you shut down LV and open the Task Manager do you see (on the Processes tab) any MS Office components still running?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
I've installed my old faithful Acrobat 9 Pro on my new Windows 8.1 computer. The program works, but every time I save the document, it tells me "The Organizer Database is damaged and will be reset. Quit the program and close all browsers." (Something close to that text.) I've entered the error online, and a solution does appear for XP, Vista, and Windows 7. It tells me to have Windows Explorer show hidden files, and then look for "Organizer90" within Users/[me]/AppData/LocalLow/Adobe/Acrobat/9.0, and then delete that file -- which will make Acrobat generate a new one. But there is no such file there. Please help with alternate solution. NOTE: When I "Check for Updates" in Acrobat, I'm told that there are no updates available at this time, but also told: "Please note that some updates for the following products cannot be determined at this time: Adobe Updater." Seems like things are out of whack.
Thanks for help. Difficulties continue: When trying to install 9.5.5, I'm told it can't install because the program may not be on my computer, or may be the wrong version. I'm told to check that the program exists. The installed version (9.0) is totally legit, my serial numbers, etc., I've used it for many years. Automatic update seems to be on, but I downloaded Adobe Updater to be sure. Seemed to make no difference. Program does function, but not perfectly. Under "About," it calls itself 9.0, so it would not seem that auto update is taking place. Acrobat on previous machine (Windows Vista) indeed calls itself 9.5.5. (It was installed with same 9.0 package, and presumably updated itself to 9.5.5 over the years.) So summary of current problem: Acrobat 9.0 won't upgrade to 9.5.5 on Windows 8.1.
-
Can i use Oracle Database Audit Vault and Oracle Database Firewall on Solaris?
Can i use Oracle Database Audit Vault and Oracle Database Firewall on Solaris?
4195bee8-4db0-4799-a674-18f89aa500cb wrote:
i dont have access to My Oracle Support can u send text or html of document please?
Moderator Action:
No they cannot send you a document that is available only to those with access to MOS.
That would violate the conditions of having such service contract credentials.
Asking someone to violate such privileges is a serious offense and could get that other person's organization banned from all support and all their support contracts cancelled.
Your post is locked.
Your duplicate post that you placed into the Audit Vault forum space has been removed (it had no responses).
This thread which you had placed in the Solaris 10 forum space is moved to the Audit Vault forum space.
That's the proper location for Audit Vault questions. -
Urgent help : Need to recover a database without backup and archivelogs
Hi,
We are in urgent need to recover a database without backup and archivelogs
one datafile seems corrupted
SQL> recover automatic database until cancel using BACKUP CONTROLFILE;
ORA-00279: change 10527325422479 generated at 07/27/2011 03:13:04 needed for
thread 1
ORA-00289: suggestion : /pys/u5/oradata/PYS/PYSarch/arch0001.0000181845.arc
ORA-00280: change 10527325422479 for thread 1 is in sequence #181845
ORA-00278: log file '/pys/u5/oradata/PYS/PYSarch/arch0001.0000181845.arc' no
longer needed for this recovery
ORA-00308: cannot open archived log
'/pys/u5/oradata/PYS/PYSarch/arch0001.0000181845.arc'
ORA-27037: unable to obtain file status
HP-UX Error: 2: No such file or directory
Additional information: 3
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/pys/u2/oradata/PYS/pay_system_01.dbf'N Gasparotto wrote:
bsac14 wrote:
my database is in no archive mode
can you please tell how to restore
yes it is a datafile corruptionYou did not say how you defined that's a datafile corruption. You provide minimum to zero information.
I just need to bring the database up,no need any exact data
I can refresh from prod laterThen drop and recreate database. Basically and since you are not in archive mode, no recover is possible. Period.
Nicolas.Hi,
How did you come to the conclusion that your datafile is corrupted? Can you provide and supported logs?
Regards ..... -
How to recover database without controlfile and redo files?
Hi all,
If I just have datafiles using hot backup saving in another machine, and all files in current database were lost including data files,control files and redo log files .
How can I recover database just using hot backup datafiles? without control file, without redo files.
Your help is greatly appreciated.alter database backup control file to trace
SQL> alter database backup controlfile to trace;
Go to udump folder in oracle home folder check the trace file copy these lines
CREATE CONTROLFILE REUSE DATABASE "O10G1 NORESETLOGS NOARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 454
LOGFILE
GROUP 1 'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\REDO01.LOG' SIZE 10M,
GROUP 2 'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\REDO02.LOG' SIZE 10M,
GROUP 3 'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\REDO03.LOG' SIZE 10M
-- STANDBY LOGFILE
DATAFILE
'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\SYSTEM01.DBF',
'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\UNDOTBS01.DBF',
'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\SYSAUX01.DBF',
'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\USERS01.DBF'
CHARACTER SET WE8MSWIN1252
Change the new database name abc
and REUSE replaced by SET and NORESTLOGS replaced by RESTLOGS above lines.
Save as C1.sql
C:\ set oracle_sid=instance name
C:\>sqlplus /nolog
SQL*Plus: Release 10.1.0.2.0 - Production on Tue Apr
11 06:44:28 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
SQL> connect / as sysdba;
Connected to an idle instance.
SQL> startup nomount
pfile='C:\oracle\product\10.1.0\admin\jeeno\pfile\jeenoinit.ora'
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145750508 bytes
Database Buffers 25165824 bytes
Redo Buffers 262144 bytes
SQL> @c1.sql
Control file created.
SQL> alter database open resetlogs;
Database altered -
Hi guys Pls tell me a way to connect db4 database with jsp and which driver
hi guys
Pls tell me a way to connect db4 database with jsp and
also tell me which driver i have to use
also tell me how to connect with excel sheetstake a look at the follwing links. There, you'll find all what you need :
DB4:
http://www.oracle.com/database/berkeley-db/je/index.html
http://www.oracle.com/technology/products/berkeley-db/je/index.html
http://www.oracle.com/database/berkeley-db/db/index.html
http://www.oracle.com/database/docs/berkeley-db-je-datasheet.pdf
Excel:
http://64.18.163.122/rgagnon/javadetails/java-0516.html
Hope That Helps -
Database engine services and sql server replication failed in installation
hi im trying to setup sql server on my laptop but it says the 'database engine services' and 'sql server replication' have failed due to some specified module being missing can anyone help me out?
log file:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2147467259
Start time: 2015-03-17 10:47:47
End time: 2015-03-17 11:08:11
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SHARI
Machine processor count: 2
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services
1033 Express Edition 10.1.2531.0 No
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication
1033 Express Edition 10.1.2531.0 No
SQL Server 2012
Management Tools - Basic 1033 Express Edition
11.0.2100.60 No
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: c:\efa3a640a9b59ee651913f55719bf3b1\x86\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Manual
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: SHARIINSTANCE
INSTANCENAME: SHARIINSTANCE
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SHARIINSTANCE
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: SHARI\Shari Donald
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: true
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20150317_104244\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The specified module could not be found.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xEC717F7D%400xC24842DB&EvtType=0xEC717F7D%400xC24842DB
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The specified module could not be found.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xEC717F7D%400xC24842DB&EvtType=0xEC717F7D%400xC24842DB
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20150317_104244\SystemConfigurationCheck_Report.htmHello,
As per the log details shared, installing version is SQL server express. Please go to control panel - add and remove programs and uninstall the
SQL Server Database Engine Services Instance Features, and also Uninstall all SQL Services.
Reboot and start the start the installation with RUN as Administrator.
Thank You.
Regards, Pradyothana DP. Please Mark This As Helpful if it helps to solve your issue. ========================================================== http://www.dbainhouse.blogspot.in/ -
Hi Experts,
I am looking for the ASAP Q&A database for MM and PP modules. Can anyone send me the documentation please?
FotsoHello,
Refer the below link for your reference.
http://dev.fyicenter.com/Interview-Questions/SAP-1/What_is_SAP_.html
http://www.esnips.com/web/ndpanchal-SAPMaterials/
http://www.geekinterview.com/Interview-Questions/SAP-R-3/Modules
http://www.sap-img.com/materials/common-sap-mm-questions.htm
http://www.sap-img.com/mm015.htm
http://www.sap-img.com/materials/sap-mm-self-test-questions.htm.
http://www.daypo.net/test-sap-mm.html
Regards,
Sarthak
Maybe you are looking for
-
It takes a long time for the computer to warm up and start working, maybe 30 seconds. Just to open an email can take 10 seconds. This is the kind of delay I was experiencing on Internet Explorer before I switched to Firefox 3. It is particularly slow
-
Re: AC/DC Adapter use by diverent Laptops
Hello, I have an A660-12Q and an L670D-146. The Laptops have diverent AC/DC Adpater (PA3714U-1ACA = L670D / PA3716E-1AC3). The technical data and the plug are almost the same. Can it problems to exchange the adapters under each other ? Best regards f
-
Premiere Pro CS6 Issues with AJA and Black Magic
Has anyone had any issues outputting via AJA and Black Magic cards? I have 3 Macs using Black Magic Intesnsity Pro HDMI cards and 1 Mac using an AJA IO Express. On all the machines, i get weird audio issues intermitantly. I press play, no audio comes
-
Another iTouch Internet Problem
I can connect to the Internet somewhat, but my iTouch doesn't complete the connection to its close. The URL indicator opens to the website but halts about 1/2 to 3/4 of the way. The "circle thingy" goes around & around as though it's working, but the
-
Air-Play functionality on IOS 8
Can you tell me, is it possible to revert from IOS 8.1.3 back to IOS 7 ? With IOS 7 it was possible to stream a movie on the iphone and play it through the apple TV. Once playing, you could then come out of the browser and leave it playing while you