HT1338 Mac Pro WiFi suddenly states "No hardware installed" but it worked yesterday.

Anybody else seeing this recently? Hopfully it's not a hardware issue.

All kinds of weird fixes for this issue have been reported, most of which make no sense. I think it's usually or always caused by a hardware fault, which may be intermittent — something like a loose connector or a failed solder joint. Almost anything might seem to fix it, at least temporarily. In some cases, a software or firmware bug may be involved.
The Apple Hardware Test doesn't find anything, as usual.
To rule out everything but a bug or a hardware fault, take each of these steps that you haven't already taken:
1. Make sure all available updates are installed.
2. Reset the NVRAM.
3. Reset the System Management Controller.
4. Boot into Recovery by holding down the key combination command-R at the startup chime. In the OS X Utilities screen, select Get Help Online. A copy of Safari will launch. Test, then reboot as usual.

Similar Messages

New Mac Pro with Lion and can't install FCP.

I got a new Mac Pro with Lion and can't install FCP that worked fine in SL. Is it not compatible? Is it really a PowerPC program??? I'm a videographer and rely on this software and to spend $300 to continue to use it after spending a lot more for this software 4 years ago! Tell me this is not the case and there is a solution to installing FCP.

How to run FCP 6 (FCS 2) under Lion.
The installer for FCP 6 (FCS 2) is a PPC app. The Programs themselves are Intel. If your trying to install FCP 6 (FCS 2) this work-around will work...
First you need to install Rosetta from your Snow Leopard OS installation disc:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/27987.html
After doing that you can install FCP 6 (FCS 2). Remember, after installing FCP 6 (FCS 2) you need to apply the updates. This has been discuss many times in the Final Cut Studio forum.
If your trying to install FCP version 5.1 (FCS 1) (a PPC app) and below your out of luck....
If you need further help, here is the URL for the Final Cut Studio forum:
https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
R

Can I buy a Mac Pro in the States and then buy and register AppleCare in Australia?

Hi,
I am going to buy a Mac Pro in the States but will be using it mainly in Australia. Can I purchase and register Applecare for the Mac Pro in Australia?
Thanks.

Would you incur a fiscal deficit, moreso, by registering a US purchased
Applecare plan, or registering the same plan, bought in Australia?
The AppleCare extended plan is nearly global, and could be bought
nearly anywhere. Some users buy one in the USA, then travel to Japan.
In some cases, the place where you buy the plan is cheaper than where
you may be living afterward; so consider the national sales tax in Oz.
Depending on where you buy the computer in the States, the plan can be
added on and automatically enrolled at the same time. You could wait
and buy the plan in Australia; at whatever currency rate and tax added.
Is there any magic behind the method, man?

I have some OLD software on my Mac Pro. How do I know if it will work with Snow Leopard? Currently I'm using 10.5.8.

I have some OLD software on my Mac Pro. How do I know if it will work with Snow Leopard? Currently I'm using 10.5.8.

Michael Wasley's link (wikidot) is as accurate as any I can find.
It's still wise to check with the vendors' websites for compliance.
Biggest source of problems seems to be printer and scanner drivers.
Appleworks 6.2.9 works fine in SL under Rosetta (note; Rosetta is installed by default in Leopard - in SL you may have to select it from the optional installations).
Check particularly with Adobe products; some you'd think should work ok suddenly don't.

TS1362 I have a Mac Pro tower, am running osx and iTunes will not work.. It basically just stopped working after having run faultlessly for...years... I can see all the songs, playlists etc, but the progress bar will not progress..it's 'stuck'. Suggestion

I have a Mac Pro tower am running OSX and iTunes will not work. It has always worked flawlessly. I can see all my iTunes content- my playlists, my songs et cetera, But I cannot play anything. The progress bar is 'stuck'...any suggestions?

Thanks. I have been using iTunes since its inception and have never had a problem...I'm using the latest version. The progress bar is the bar that moves when you're playing a song..it just won't start when I double click on a song,..have tried quitting, rebooting etc but nothing works. Apple are useless-they have told me twice they've tried to call me 'momentarily', but I've been waiting by the phone, and they definitely have not tried to call...

Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.

Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.

Try this:
clone your system and repair it with Disk Warrior instead
Or try a clean test system install on another drive
A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
Try to run w/o externals. MyBook included.
Is that a 7200.11 1TB? they had a lot of issues.
Run AHT off your OEM DVD.
2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current. Hopefully you have a UPS and is 1500VA unit.
When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
TimeMachine has its own bad habits, especially with Green drives and some externals.
Try to rule out everything and then add back one at a time.
And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old. Might want ATI 5870 or 5770.

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
Thank you.

You're welcome
Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PL

I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PLEASE HELP!!

Hi jim1287,po
Check for the latest updates. Installing latest updates should resolve this problem.
Also, try to ran disk repair using safe mode in Mac, for instructions please visit: http://support.apple.com/kb/PH14204
Try enabling root user profile on mac and try to check. OS X Mavericks: Enable and disable the root user
Regards,
Ajlan Huda.

What is better Mac Mini or Mac Pro and 4K 40" screen or iMac 5K for work with Exel

I am working on Macbook pro retina for around 16 hours a day, it is ok but the screen is to small. I am opening about 25 - 30 EXCEL windows, 20 - 25 safari windows at the same time. Excel windows are small, they only show 40 rows and S column Now I am considering buying iMac 5k ( but the screen is only 27", however a very high resolution but I think that fonts and digits displayed may be too small ). I am also considering Mac Mini or Pro with 40" 4K TV ( 4k computer monitors are 27 - 31" , so better idea would be purchasing iMac 5k ) . The problem is that 40 - 42" TV don't have Display Port ( I can't find it anywhere )
Please help me to choose what would suit my needs better. I need large screen to work comfortably with an Excel sheets. What is better? Mac Mini or Mac Pro and 4K 40" screen or iMac 5K for work with Excel ?. The other problem I have is that when I spend 16 hours at work with retina macbook , my eyes are ok. Using the 30'' Dell screen 2560/1440 my eyes are tired after 2 hours.
Thanks for your help on advance
Best regards
David

Currently you can only get 4 K at 30 Hz via HDMI. Some users have reported jerky curser movement because of the 30 Hz.
I would go for the 5K iMac. You can add a second screen at 4K.
FaceTime HD camera
Simultaneously supports full native resolution on the built-in display and up to 3840 by 2160 pixels on an external display
Support for extended desktop and video mirroring modes
The Mac Mini supports:
Support for up to two displays at 2560 by 1600 pixels, both at millions of colors
Thunderbolt digital video output
Native Mini DisplayPort output
DVI output using Mini DisplayPort to DVI Adapter (sold separately)
VGA output using Mini DisplayPort to VGA Adapter (sold separately)
Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)
HDMI video output
Support for 1080p resolution at up to 60Hz
Support for 3840-by-2160 resolution at 30Hz
Support for 4096-by-2160 resolution at 24Hz
The 2013 Mac Pro can use three and more displays:
Mac Pro (Late 2013): Using multiple displays - Apple Support
I would go for multiple screens

How do I access Java on my Mac Pro so that I can make sure it's working so I can view Netflix "watch instantly"?

How do I access Java on my Mac Pro so that I can make sure it's working so that we can view "watch instantly" on Netflix?

There are various browser scripts
1: Java (not needed much at all and highly advised to be turned off in Safari/Firefox preferences due to it's vulnerability)
2: Javascript (if off, needs to be turned on in Safari/Firefox preferences as it's used A LOT)
Note: If your using a NoScript type blocker, then you need to whitelist the site. Or drag a Temp Allow All button to Firefox's Toolbar.
3: Silverlight plug-in (needed for watching Netflix content, it's from Microsoft)
4: Flash (needed for watching a lot of web based content, but requires constant checks to make sure it's current as they have a lot of security issues)
Check your status here, works on all web browsers
http://www.mozilla.org/en-US/plugincheck/

I have Mac Pro with Keynote and other essentials installed. How can I download the same on my IPAD without paying to download.

I have Mac Pro with Keynote and other essentials installed. How can I download the same on my IPAD without paying to download.

Try downloading them onto the iPad normally. If you're asked to pay for them, you can't.
The developer needs to create the two versions separately.
(116544)

Mac pro won't read windows 7 install disc?

My 2007 mac pro won't read windows 7 install disc. My macbook reads the disc fine, so it is not a problem with the disc. It is 32-bit. The apple help line suggested firewire connecting the macbook to the macpro and starting the macbook in target disc mode, but other posts I have read have said that this will not solve the issue. Any suggestions?

Could be. I just rebooted and it read the disc. Unfortunately the windows install got interrupted and I had to reboot, and now it wont read the disc again. Is there any other way to install windows 7 to bootcamp, other than from the disc? Can I use FireWire and target disc my MacBook (the MacBook reads the disc just fine)?

I have a Mac Pro 10.7.5 My scanner stopped but my printer is working

On my Mac pro desktop my scanner just all at once stopped working now for 2-3 weeks.My printer is working fine so far.So what's my solution or is there one?

Hey Cooljoe58,
Thanks for using the Apple Support Communities. I understand that you are experiencing some issues scanning in OS X. The following resource provides some solutions that you may want to try. While titled for OS X Yosemite, most solutions apply for Lion as well:
OS X Yosemite: Scanning troubleshooting
http://support.apple.com/kb/PH18626
Thanks,
Matt M.

My mac pro's power adapter has something wrong, sometime can work, sometime dosen't, can you fix it?

my mac pro's power adapter has something wrong, sometime can work, sometime dosen't, can you fix it? i brought this mac pro last year.

No, we can't fix it. Probably live half the world away from you and don't have telephatic powers....
But you can try yourself. First, make sure the connector is absolutely clean. The gold pins on the cable end should all move freely and fully extend out. The gold pads on the Mac connector should be spotlessly clean, and the area around them, where the metal ring on the cable goes in, should be free of any debris that may impede full seating and contact.
Next, the cable on the power brick should be in good condition, without kinking or fraying. If there is any damage, only solution is replacement, it is not serviceable.
Lastly, make sure the battery is ok. Go to the About This Mac item in the Apple menu, do More Info... / System Report... and select Power on the left column. In the Battery Information, Health section, make sure the Condition is Normal. Else, will need replacement.

The wifi i have been using for months quit working yesterday. any ideas how to fix this?

the wifi i have been using for months quit working yesterday. any ideas how to fix this?
HELP!!!

Is your Wi-Fi visible?
iOS: Wi-Fi or Bluetooth settings grayed out or dim
iOS: Troubleshooting Wi-Fi networks and connections
Did you check your router?
iOS: Recommended settings for Wi-Fi routers and access points

HT1338 Mac Pro WiFi suddenly states "No hardware installed" but it worked yesterday.

Similar Messages

Maybe you are looking for