HT1338 my cd drive is not working and a disc had been inserted in it and now i am not able to eject it

i am very angry and the problem is of cd drive i inserted a disc and now it cant be ejected.

Hello,
A Dozen ways to eject a CD/DVD...
http://www.osxfaq.com/dailytips/08-2002/08-12.ws

Similar Messages

  • I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working.

    I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working. Adobe Acrobat has been a primary tool for accommodating memory problems after a brain injury. (A car ran me down while I was out getting exercise.) I installed the SSD because I needed my management of PDF files to run faster. I called tech support for help when the software first stopped working, but they needed me to give them a number from my original disks. Because of my disability, I've been having someone come in to clean, and the shelves where I kept my software packages were cleared. I've been hunting for them ever since, but I can't look for them myself for very long at a time. Today I finally found them, but now I can't seem to contact tech support. What happened? I don't want to delete my old files because I need the setup to remain unchanged, because I don't do well with changes. I think all I should need is to have someone located the license file on drive E: and move it to wherever it is needed on the SSD drive, but I don't know what to look for.

    Tech support is not normally available on weekends.  You should contact them as soon as the weekend passes and pick up where you left off with them.

  • I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from the we sites, which did not work and now I can not get the computer to reboot the gray screen comes on and if a shift c I get a load bar and it goes half way and help

    I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from web sites, which did not work and now I can not get the computer to reboot the gray screen comes on with the apple and if a shift+c, I get a load bar and it goes half way and stops, I can get into the black screen area with the hard drive info
    I did the following:   mount -uw /    rm/var/db/.AppleSetupDone    shutdown/uses/us  reboot Ok I know I should not have, but now I need help to reboot and hopefully not lose everything on the desk top, Linda Markle

    You did the wrong things. In the future it's a good idea to remember not to do something when you don't know what you are doing and what happens when you do it.
    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see:
           Reset a Mac OS X 10.7 Lion Password
           OS X Mountain Lion- Reset a login password,
           OS X Mavericks- Solve password problems,
           OS X Lion- Apple ID can be used to reset your user account password.

  • My cd/dvd drive isn't working and i want to upgrade my mac os x10.5.8, how can i upgrade without the software CD

    my cd/dvd drive isn't working and i want to upgrade my mac os x10.5.8, how can i upgrade without the software CD

    I think not.   You will need to order a disc from Apple quoting your serial number, as many of these discs are machine specific.   So unless you can get your drive working I think you will have to take a trip to an Apple store.  
    Indeed, you have an old computer that may not be worth the cost of repair ... but it is still worth seeking Apple advice and a visual inspection.   It just might be something not too drastic.

  • Hp Pavilion dv6 Notebook , Driver display stopped working and has recovered

    Hi, I have a problem with my driver display.... 
    I installed the Autocad program , and after 2 weeks, every time that I open the Autocad, after 4 or maybe 5 min. the screen goes black and after that a note shows up saying: Driver display stopped working and has recovered. I Try to update everything using the Hp support assistance and still i have the same issue. I don't know much about the computer and the driver so I will appreciate if  somebody give me a solution. Thank you!!!

    Hello @youleeus,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how the driver display has stopped working, that it has recovered, and I would be happy to assist you in this matter!
    To further diagnose this issue, I recommend following the steps in this document on "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista. This should help prevent the GPU on your computer from timing out.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • HT1212 I just updated my Ipad 2 to IOS7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. I tried using the OIS7 passcode I use on my Iphone  and it did not work and now my Ipad is disabled

    I just updated my Ipad 2 to IOS 7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. Earlier today I upgraded my Iphone 5 to IOS 7 and it asked me to set a passcode, which now works fine on my Phone. I  tried using the OIS7 passcode I use on my Iphone 5 and it did not work and now my Ipad is disabled. Both devices are on icloud and share the same apple id. The Ipad screen says slide to set up but then there is a prompt for passcode, not for setting up passcode

    I called Apple Support and a supervisor helped resolve this for me on my iPad. I suggest calling them for help as this is obviously an issue with the iOS 7 update - she helped me without charge. I could be missing something in my upcoming description, so do not take this as complete - call them.
    I had to update iTunes on my Mac Air to the latest version, and I had an iCloud backup from the day I updated to iOS7. Have iTunes open but do NOT connect your iPad yet. Shut down the iPad. Then press/hold the Home key on the iPad while you connect the USB from the iPad to the computer (an image of the USB cable appeared on the iPad). Follow the prompts in iTunes to restore and then backup using iCloud. When the iPad rebooted again to do the backup install, I got the same pass code issue and iTunes would not recognize the iPad without entering a pass code. I disconnected the iPad, turned it off, pressed the Home key while connecting the USB cable. When I did the restore and backup from iCloud the second time, it worked without the pass code issue occurring.

  • I have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

    i have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

    Is it this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Otherwise:
    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My Ipad did work on my wireless at home and works on other wireless but no longer at home. My IPhone works at home and others can use the wireless Confused that it did work and now does not?

    My Ipad did work on my wireless at home and works on other wireless but no longer at home. My IPhone works at home and others can use the wireless> Confused that it did work and now does not?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
     Cheers, Tom

  • HT204368 bluetooth stopped working and now will not pair with any of my devices ?

    bluetooth stoped working and now will not pair with any of my devices? any suggestions?

    Hello, oscar302. 
    Thank you for visiting Apple Support Communities.
    Here is an article that you may find helpful with this issue.
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    Cheers,
    Jason H.

  • HT4623 I try to update ios to 6.1 but it doesn't work and now iphone gone to factory mode from initial stage and upon when am connecting to itune its not getting thru, kindly advice

    I try to update ios to 6.1 but it doesn't work and now iphone gone to factory mode from initial stage and upon when am connecting to itune its not getting thru, kindly advice

    From the Firefox help files;<BR><BR>
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.

  • Wifi was working, and now does not discover any networks

    I had wifi working, and now it does recognize any of the 6 networks that everything else discovers, any sugestions?
    I read all related posts, did the software update to latest version, restarted several times, and did wifi reset. Actually my statmenet above is not entirely true. It does discover the network and connects when I place the device on top of a router, but moving to 50cm away from it and the connection disconnects and there are no networks discovered. I have tried it with 2 different routers, both of them are working well with my blackberry and laptop - and this was also working with the ipad before.

    Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo.
    If this does not work, then restore the iPad to its factory settings and start again.

  • I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

    I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

    I thought that, but I put the sim card in another device that is not Apple and works. Definitely the sim card work, but no longer in my iPhone 5 or maybe in any other Apple device, i dont know why!! But i gonna get a replacement to see what happen

  • After downloading ISO8 my USB Ports on my IMAC arnt working and now my iPad2 will not charge?

    after downloading ISO8 my USB Ports on my IMAC arnt working and now my iPad2 will not charge? even tried to use 240v charger? both my iMac and iPad have been updated, my mini iPad is working on old iso7 so that won't be updated in a hurry, any help would be great.

    First is the most USB ports do not provide enough power to charge an iPad. Do not try and charge your iPad from such USB ports.
    There is no 240v charger. There is one charger that will work with US voltages and European voltages. If your iPad is not charger with the charger, make certain that is an iPad charger, not an iPhone charger. If the charger does not work try swapping the cable as the cable may be bad. If that does not work try another charger. All simple steps that should be attempted before pinning the problem on IOS 8.

  • Im going to go to apple to show my phone that my wi-fi wasnt working and now iv droped my phone and the hole screen came out, its not mashed it just came out, but work, so now im worried apple my wont take care of it

    im going to go to apple to show my phone that my wi-fi wasnt working and now iv droped my phone and the hole screen came out, its not smashed it just came out, butstill works, so now im worried apple my wont take care of it, what will they do ??  it was a bran new phone

    You are correct to worry. There is no way for Apple to know if the wifi problem was before or after the drop. If you have Apple Care +, you can get a replacement device for a deductible. If not, user damage is not covered under the warranty or regular Apple Care. You would need to see if they will repair the screen (at your cost), or if you would have to purchase an out of warranty replacement.

  • 「Display driver has stopped working and recovered successfully」

    I have a MSI GS60 2PC GHOST laptop.
    Graphic Driver: Intel HD Graphics 4600
    When I was playing a game on my laptop, it suddenly lagged or the game screen turned black, then recover, turned black then recover... multiple times and each time I get a message saying that the "display driver has stopped working and recovered successfully" on the bottom right.
    I have tried updating the graphic driver and it worked for about an hour or so, and the problem came back.
    Need help in solving this problem!

    Does this happen when you run the game by using dGPU(NVIDIA graphics) or iGPU(Intel graphics)?
    (Check the color of your power button light, it lights red when dGPU is running and blue when iGPU is running)
    Does this happen on all games you play or just one single game?
    Tell your current graphics driver version(both NVIDIA and Intel graphics driver).
    If you're running the game with NVIDIA graphics, check your vbios version in NVIDIA control panel(Right click on the desktop> NVIDIA Control Panel> System Information>Video BIOS). There is version 80.04.EF.00.22 released on the MSI website, and if you have a different one, I'd suggested to update the VBIOS and see if the problem still remains.
    VBIOS Download link: http://dl.msi.com/download_files/frm_exe/N15P-GX-B_80.04.EF.00.22.zip
    VBIOS Update Guide: http://www.msi.com/files/pdf/VBIOS_Update_under_DOS_mode_EN.pdf

Maybe you are looking for