My Ipad did work on my wireless at home and works on other wireless but no longer at home. My IPhone works at home and others can use the wireless Confused that it did work and now does not?

My Ipad did work on my wireless at home and works on other wireless but no longer at home. My IPhone works at home and others can use the wireless> Confused that it did work and now does not?

Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
 Cheers, Tom

Similar Messages

  • TS1702 The Calendar app that came on my i4S Phone does not sync the correct time for items posted on my Yahoo Calendar.  Actually, they post exactly 4 hours earlier than the correct time on my Yahoo Calendar.  Does anyone have a "fix" to correct the "time

    The Calendar app that came on my i4S Phone does not sync the correct time for items posted on my Yahoo Calendar. Actually, items post exactly 4 hours earlier than the correct time on my Yahoo Calendar.   My i4S is in the correct New York time zone.  Help?

    I posted this question a while ago and didn't receive any responses but there are a lot of people who have viewed it and 10 have said they have the same question so I thought I would update you that I added my nanny to my exchange server account (created an email for her) and I send all invites to that email address and they work.  So sending invites from an exchange server account to a non-exchange server account apparently is a bug so to solve it, get on an exchange server I guess.

  • My iphone has a black screen, when I attach the charger i get a beeping noise. It does not seem to be charging ?

    My iphone has a black screen, when I attach the charger i get a beeping noise. It does not seem to be charging ?

    try a reset, hold down the home/power button together until you see the apple logo and then release then wait for the phone to boot back up.

  • Want to start PSE 12 in photo editor but it will only start in Orgaizer, can't get to welcome screen and the .exe file that Adobe said to look for does not exist on my files

    Have tried to start PSE 12 in photo editor but it continues to start in Organizer.  I do not want my pictures loaded in Organizer at all.  Saw a page on the web that said to click on an .exe editor file but that is not on my files.  Also cannot get a welcome screen to come up, only an organizer even though I checked it the first time to come up in photo editor.  I'm now having Organizer crammed down my throat.  Tried online chat but was cut off with the statement that no support is offered for v12 any longer.

    Hi,
    You failed to say which operating system you are running on so I'm assuming it is Windows of some type.
    You should be able to find the following files, using explorer, depending on your system.
    64bit system: "C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
    32bit system: "C:\Program Files\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
    Double clicking on that should start the editor - suggest to create a shortcut to it.
    If you can't find one of those files, then you either installed it somewhere else or you need to re-install elements.
    Brian

  • When I try to change the default program for opening a specific file type The "Always use the selected program to open this type of file" does not highlight.

    I can not therefore change the default program. How can I get this to highlight?

    Hi Swansong,
    It is also possible to [[Set how Firefox handles different types of files]]

  • I try to get the album artwork from google images... and it works GREAT.. until i see the album on my iphone. is there any way i can get the artwork without it being all crappy and pixilated???? THANKS =D

    READ THE TITLE PLEASE

    The syncing of music is one way, computer to phone. See this helpful document from a fellow user. Credit goes to the author.
    https://discussions.apple.com/docs/DOC-3141

  • How can I use the bridge photos that are thumbnail size and place in Photoshop to edit, etc?  The size is too small, - how to enlarge without blur?

    When I use Bridge to transfer a photo into Photoshop, the size is thumbnail.  It is too tiny to edit into Photoshop.  How to enlarge without blur?

    That is the actual size of your image file. 48 x 38 is very small.
    That is not a Bridge or Photoshop problem.
    It is a very small image and you cannot enlarge it more than x 1.5.
    If you want a large photo you must ask for it from whoever gave it to you, or take a bigger photo if it is yours.
    Gene

  • MDT and Macs running Bootcamp – worked in MDT 2010, now does not in MDT 2012

    I haven’t been able to find much info on this so I thought I would try here and see if anyone can help. 
    We’ve been using MDT 2010 for the last couple of years to install Windows 7 on Macintosh’s running Bootcamp and it’s been working fine. 
    We recently upgraded to MDT 2012 and the same process we used to use for this does not work anymore and I would like to find out how to make it work on 2012. 
    Here’s how the process works: 
    First, setup Bootcamp on the Mac.  This creates another partition on the Mac for the Windows OS (partition 3 for MAC OS 10.6 and lower, partition 4 for OS 10.7 Lion because of the recovery partition). 
    Unfortunately Bootcamp cannot create NTFS partitions so it formats it as FAT32.
    We then create a standard client task sequence using MDT and the Windows 7 source files (not a custom image) and give it a name to make it obvious it’s for Mac’s – “Windows 7 for Macintosh running Bootcamp”. 
    We edit that task sequence and disable the built in “Format and Partition Disk” step since we don’t need to create the partition, only format it as NTFS. 
    We then create a custom diskpart.txt file called BootCamp_Lion.txt with the following contents:
    SELECT DISK 0
    SELECT PARTITION 4
    FORMAT FS=NTFS QUICK OVERRIDE
    We place this file in the “Extra directory to add” location we’ve specified in the Win PE Customization section so it is located on the root of X:\ when it boots into Win PE. 
    We then add a command line to the task sequence:  diskpart.exe /s x:\BootCamp_Lion.txt 
    to format the existing bootcamp partition as NTFS.  Then in the “Install Operating System” step we set it to apply to a specific disk and partition – Disk 0, Partition 4. 
    This installs Windows 7 on the Bootcamp partition and leaves the Mac OS intact and has been working fine in MDT 2010. 
    Now with MDT 2012, the task sequence starts fine, formats the partition, installs Win 7, but when it comes up in the full OS for the first time I get the error “Unable to find the SMS Task Sequencer. 
    The deployment will not proceed.”  And the task sequence stops. 
    I know the partitioning part has changed in 2012 and have read that you can get this error if you deploy to something other than disk 0, partition 1 but I’m wondering if I can accomplish the same thing that I used to have working in 2012. 
    Is there a different way I can do this?  Any help would be appreciated.
    Thanks,
    Robb

    Hi Guys
    I have been having the same problem.
    What I have done to get around it is
    add a custom command as we all did in MDT 2010 to format partition 3 or 4 depending on the version of OSX
    don’t disable the Format and Partition Disk task but tick in create active partition then remove the partition properties and then click on options and check
    continue on error
    then under install operating system change the partition that you want to have windows installed on
    Once the deployment has completed you will receive the message that deployment has completed but with one error
    Hope this helps
    Regards
    Matthew

  • I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

  • My dad has a brand new iMac. If he quits an app, this window closes, but the app won't finish shutting down, Force quitting does not work.  Once another app is opened, it will not close either.  Now none of the apps are responding. Any ideas?

    My dad has a brand new iMac. If he quits an app, this window closes, but the app won't finish shutting down, Force quitting does not work.  Once another app is opened, it will not close either.  Now none of the apps on the dock are responding. I asked him to click on the apple, and drop down to "About this Mac", but that wouldn't open either. Any ideas?  If I was at his house, I would call Apple Care in a heartbeat, but am home with my sick daughter,,,  Thanks!

    For starters, have him open Disk Utility in Applications>Utilities, select the volume (the indented listing) and Verify Disk. If it reports any problems, have him try a Safe Boot by holding the Shift key at startup. This boot will take much longer than usual. It's checking and trying to repair the drive directory, if possible. Once in Safe Boot, have him repair Permissions.
    For other Disk repair remedies see
    http://support.apple.com/kb/TS1417
    Also, have him try a PRAM Reset. At the startup chime, hold down CMD-Option-P-R together, listen for two more chimes, total three, then let go to finish booting.
    Also, is he running any AV? If so, have him uninstall it. It might be responsible for this behavior. (There are no viruses for OS X.)

  • Time capsule now does not work with Lion just installed.

    Just downloaded Lion to Mac Air. Time capsule now does not work. Where is the problem?

    Restart the TC.. lion is stupid.. it forgets what it is connected to with alarming frequency ... like someone suffering dementia.
    If it continues to have issues, plug the TC directly to the lion computer by ethernet (if not already) and try again. Change the wireless to manual in airport utility and change the wireless name.. to force a new configuration. Once setup you can just use wireless.
    In the end you may need to reset the TC.. just hold in the reset button for about 10sec. It should then become available.. a reset does not do anything to data on the hard drive but you might need to restore any passwords.

  • Upgrade to media source 5 and now does not recognize my Zen Touch player!?

    JUpgrade to media source 5 and now does not recognize my Zen Touch player!
    st off, I was having issues with mp3's transferring to my zen touch, it would say file cannot transfer, invalid format or something of the like.. The creative audio converter would not allow the file to be converted as it said the source was not availble, all odd as the files worked fine on my computer and were mp3 format. I did get them to transfer after downloading another 3rd party converter, I wanted to get past using another program though so I updated to media source 5, along with firmware updates to most recent for the zen touch.
    Once I had updated it would not recognize my player, I opened version 3.xxx whatever and it did recognize. Thinking maybe it has an issue with both being installed I unistalled the old version. Same problem, still does not see my player. I upated the driver for the player as well, and my computer now could see the zen touch instead of unknown usb device, media source 5 no go still at this point. I opened windows media 0 and it saw the player and I could transfer files, but the lay out and editing cababilities are limited.
    Basically I want to know what to do get this thing detected so I can use media source 5 to organize my files. Someone please help me.

    N Oh how I love the beauty of forums! Fantastic. So you know the fix went for my issue here, I had already upgraded the zen/jukebox driver to version 2.0 to no avail, and did not get the play for sure firmware as it says all data will be lost, but I did upgrade with the other option on the support downloads section before as well to no avail. Thanks to?GuyGraham, after I installed the app update for Creative ZEN and NOMAD Jukebox Plugin 5.00.22 for Creative MediaSource 5 Player/Organizer it works once again!! I just do not see how this file isn't included with the media source 5 application in the first place. Either or thanks a lot you guys, problem sovled!

  • The hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    it might be a malfunction in your device. you might ave to send it to repairation
    1.ave you try resetting it or restoring it?
    2. did your hold boutons whas working beffor?

  • I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated.

    I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated. Now I can't even remove the program at all. Why is this happening?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • After updating my iPad recently, I can no longer use it to present PPTs using a TV monitor that always previously worked. The display mentions something about using AirPlay which I am not using or trying to. Suggestions please?

    After updating my iPad recently, I can no longer use it to present PPTs using a TV monitor that always previously worked. The display mentions something about using AirPlay which I am not using or trying to. Suggestions please? I am currently using iOs 7.0 on this iPad and I never had a lick of trouble until aetr this update. Anything would help. Thanks.

    I'm adding screen shots taken from this afternoon showing connection that varied from non-existent to 1X.

Maybe you are looking for