HT1338 My key register does not work ,I can't install my Apple's keyboard,my apple's mouse and I can't acsess anything because I can only enter as a guest .Help me , please !

I am the administrator and the key does not work,nor the registry key .

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

Similar Messages

  • Hello, I purchased design premium 4.0 German Windows  (LIZ 390232 from 22.02.2010) from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not  disable the product key. He loaded it, but onl

    Hello, I purchased design premium 4.0 German Windows  (LIZ 390232 from 22.02.2010) from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not  disable the product key. He loaded it, but only in Englisch (trial version?) Please help me for the next step. I have the license agreement in my hand.

    Moving this discussion to the Downloading, Installing, Setting Up forum.
    Jakobh53157856 before you begin the installation process please complete the transfer of license process to transfer the Adobe Creative software license you wish to utilize to your possession,  You can find details regarding the transfer process at Transfer an Adobe product license.

  • I purchased design premium 4.0 German Windows  from my friend and wanted to installation it. However, the key code does not work.

    I purchased design premium 4.0 German Windows  from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not  disable the product key. He loaded it, but only in Englisch (trial version?) Please help me for the next step. I have the license agreement in my hand.

    Nobody here can help you with this. You'll need to contact Adobe directly.
    Did your friend fill out and send in the license transfer form?
    Transfer an Adobe product license

  • My iphone 5 the volume bottom does not work  how to replace it in apple sotre

    My iphone 5 the volume bottom does not work  how to replace it in apple sotre
    i read sb said they only replace the iphone by pay more 210 quid is this ture ?

    Hi Austin XQ,
    Thanks for visiting Apple Support Communities.
    Based on the information you have provided, it sounds like your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
    Best,
    Jeremy

  • HT4623 I updated to ios 7.1 on Thursday.  My ipad basically does not work any more.  I am running around in circles on this site and on other "forums" trying to fix.  ???  Don't have time for this.....

    I updated to ios 7.1 on Thursday.  My ipad basically does not work any more.  I am running around in circles on this site and on other "forums" trying to fix.  ???  Don't have time for this.....Any advice appreciated.

    give us more to work with in terms of info then "basically does not work any more"
    it can be from it's on fire to the a key on the onscreen keyboard don't respond

  • I have the iphone 5 and my lock button does not work. Can apple fix it or give me a new one. Can they still give me a new one even if I didn't buy my iphone 5 from them I bought it from verizon

    I have the iphone 5 and my lock button does not work. Can apple fix it or give me a new one. Can they still give me a new one even if I didn't buy my iphone 5 from them I bought it from verizon

    Alread asked and answered in your previous post - please do not post the same thing multiple times in multiple forums.
    https://discussions.apple.com/thread/5164919

  • I purchased an app, but it does not work. Can I cancel it and get my money back?

    I purchased an app two days ago but it does not work.  Can I cancel it and get my money Back?
    I have in ipad2
    Thank you

    You can always try to contact iTunes Support:
    http://apple.com/support/itunes/

  • I need to verify my apple ID sent to me by e-mail however the link does not work.What can I do?

    hi!
    I need to verify my apple ID sent to me by e-mail however the link does not work.What can I do?

    Hi,
    See this Link on Apple ID:
    http://support.apple.com/kb/HE37
    Go to the Very Last Section "How do I verify my Apple ID by email?
    Cheers,

  • Resizing with my mouse using touch pad mac book pro does not work. how can i correct this problem?

    resizing with my mouse using touch pad mac book pro does not work. how can i correct this problem?

    See:
    * [/questions/777886]

  • IPod nano version 6:  random turn off, volume controls don't work, does not turn off, skip does not work.  Two years old!  Next version of nano has no clip and same amount of storage.  I do not want to give up my version 6!

    iPod nano version 6:  random turn off, volume controls don't work, does not turn off, skip does not work.  Two years old!  Next version of nano has no clip and same amount of storage.  I do not want to give up my version 6!

    Make a Genius Bar appointment at your nearest Apple Store and pay $75 USD for an out-of-warranty replacement.

  • My homebutton does not work  what can i do?

    my homebutton does not work  what can i do?

    Try a reset:
    Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.
    If the reset doesn't work, you probably have a hardware issue. If you have warranty on the iPod, the replacement will be free. If no warranty, you'll have to pay.
    http://www.apple.com/support/ipod/service/prices/
    Your other option is to use the iPod without the home button. See here:
    Hardware Defect: Home or Power Button
    (Note that I am a representative of the organization for the above link, which is not endorsed by Apple)

  • Bluetooth does not work, i can't connect any device

    bluetooth does not work, i can't connect any device

    What device?
    Iphone supports bluetooth for stereo headsets/speakers, handsfree telephone devices/headsets, some keyboards, some peer-to-peer apps from the app store, adn internet tethering where provided by the carrier.
    Other than this it will not connect to another phone, computer ,device

  • Iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

    iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

    First, try to reset by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
    If this does not help, connect in recovery mode and restore, explained in this article: iOS: Unable to update or restore

  • HT201257 I just bought an imac in september 2012.  And i just find out that my microphone is not working.  So i did an apple hardware test and with no problems found?  I have sound but no one can hear me, not even the computer.  Should i bring it back to

    I just bought an imac in september 2012.  And i just find out that my microphone is not working.  So i did an apple hardware test and with no problems found?  I have sound but no one can hear me, not even the computer.  Should i bring it back to the store

    Before you go through that trouble open About this Mac > More Info... > System Report > Audio and see if the system actually knows it has a microphone.  Then you can look into Applications > Utilities >  Audio MIDI Setup and see if the microphone is there, select it and make sure the sliders are set to full. Then in System Preferences look for Sound > Input and make sure it shows up there and the sliders are at least half way up. If none of that works do a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    It is the 5 second timing that initiates the reset.
    then go through the process of looking for the microphone again as the reset may reenable the mic.

  • CuciLync 9.2 - registry key configuration does not work as expected

    Hi,
    according to the Administration Guide for CuciLync 9.2.2 some registry keys are supported to configure the client.
    In the chapter 'Phone Parameters' there is a statement that four registry keys are supported:
    CcmcipServer1
    CcmcipServer2
    TftpServer1
    TftpServer2
    In the next chapter 'CTI Load Balancing' there is an explanation that the registry key UseCUCMGroupForCti is also supported.
    => Does that mean that five registry keys are supported and not only four ?
    My next questions leads to the possible values for these registry keys.
    With CuciLync 8.6 it was possible to leave the registry keys for CcmcipServer empty.
    In this case the IP addresses for CcmcipServer were automatically defined by downloading the config file.
    And with UseCUCMGroupForCti these IP addresses were 'copied' to CtiServer.
    That means with CuciLync 8.6 there was need to define CcmcipServer and CtiServer.
    Only the TftpServers were configured by registry keys.
    => Is this also supported with CuciLync 9.2 ?
    => If no: In which future version do you plan to implement this ?
    => If yes: Are there any extra settings needed ? Because it does not work at the moment
    Thanks for your feedback
    Best Regards
    Carsten Lucy
    (Bayer Business Services)

    According to MSDN:
    When caching is enabled, the module caches the service information data until it polls the Service Control
    Manager and discovers that the data has changed. If changed, the module updates the cached data and returns it as output. You can disable this caching feature, but doing so will cause the module to return data at every polling interval instead of only returning
    when the data has changed or when the polling interval count has reached a multiple of 10.
    However, the configuration is DisableCaching, and the default is False. Go figure that one out. Gotta
    love Microsoft configuration names and documentation! If true, then it's not disable..... :)
    Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

Maybe you are looking for

  • FBL5N - Feild selection non editable mode

    Hi All, When i execute FBL5N transaction,i am not able to select the feilds as per my desire bcoz the feild display ICON is in non editable mode. The only option i have is layout selection and not the feilds selection. Can you let me know how to chan

  • How to print the table in java.

    we want to take the print out of JTable in java. But we have some other components on the GUI alongwith the JTable.Now our query is that how cud we take the print out of JTable only? we are using jdk1.4.2 version of java.In this version we don't have

  • File Sharing in Apps not Working

    I have iTunes 9.1.1 and under the Apps tab for my iPad it shows that File Sharing is available for Air Sharing HD and Pages. It doesn't work, though. Nothing shows up as being shared (although I have shared files from Pages on the iPad) and when I tr

  • How do I give the program time to write to a JTextArea field

    Hi, I created a swing application which listens for user input with a simple button that starts a whole process of reading database records, looping the records, writing files to a file system etc. What I would like to do, is to present the user of t

  • Screen Resolution doesn't fit?

    I'm honestly not sure how it happened! I've been using Photoshop and Illustrator and then I noticed that the writing in the top menu bar was blurred and I couldn't see the dock. I went into preferences and looked at the displays part and the resoluti