HT1386 ITunes keeps complaining about too many devices registered to my account Max 5

I have 3 devices registered with my account/appleID and Itunes remains complaining about 5 devices coupled to my account.
Bad user experience, who is going to help me?
The message remains: You cannot Authorize more than 5 computers while my account overview tells me that there 3 devices registered????
Why is this made so difficult all ?????

The number of computers that your account is authorised on and the number of computers and/or devices associated to an account are different things.
The 'manage devices' section of your account shows the computers and/or iOS devices that are associated to your account i.e. tied to it via iTunes Match, automatic downloads and/or redownloading past purchases : iTunes Store: Associating a device or computer to your Apple ID.
For the computers that are authorised (iOS devices aren't authorised/deauthorised) then have you had other computers in the past and/or updated/reinstalled the OS on your current computer and not deauthorised them ? IniIndividual computers can only be deauthorised directly on them, but if you have 2 or more computers authorised then you can log into your account on your computer's iTunes via the Store > View Account menu option and 'deauthorise all' (which you can do once every 12 months) and you can then authorise/reauthorise the computers that you still have and need : http://support.apple.com/kb/HT1420
There can be a maximum of 10 computers/devices associated to an account - but as a computer also has to be authorised (and there can be at most 5 computers authorised) for it to be able to associated, at most 5 of the 10 can be computers.

Similar Messages

  • Error message about too many devices activated.

    Need to reset devices for Adobe reader. Error message about too many devices activated.

    Reader has no such limitation. It's either Acrobat or Digital Editions.

  • I have lost my iTunes music because of too many devices

      many of my songs won't play on itunes for having too many devices....and wanting passwords for aol. that i don't have anymore...how do I update which devices to delete ...I have an imac, ibook, ipod, and ipad.....mt

    Use iTunes on your computer.  Go to Store > View Account from iTunes' menu.  Sign in and choose "Manage Devices".

  • HT1420 I'm trying to authorize a new computer with an itune account, but my the computer statea that I have too many devices authorized. I only have 2 computers in my possession now. How can I deauthorize computer I don't have anymore without deauthorizin

    I have recently purchased a new lap top. Both my wife and I share our Itune music. When I purchesed the computer I was able to authorize my itunes account on it and move my purchaced music over from my iphone. However, I was not able to move my wifes music over because she has too many devices authorized under her account. Most of those computers are no longer in our possession and have been thrown out. How can she deauthorzise computer we don't have in our possession anymore without deauthorizing them all?

    Authorizing deauthorizing has NO effect at all on your itunes library.  You lose nothing.
    You should also alwasy have a backup copy.
    You MUST deauthorize all.
    You have the only answer there is.

  • I have been blocked from my own ITunes songs because my apple ID associated with too many devices

    I cannot access songs from my own iTunes Apple ID because it says my iPhone has been associated with too many devices.  I have to wait 90 days to access my own songs on my iPhone.  Here is what happend:
    1-Our family moved.  So, with the address change, the credit cards on all of the apple ID's would no longer work because the other users had our old address. (I have 4 users in the family).
    2-My family started calling me while I was out of town complaining that purchases were rejected.  This was because our address had changed and it no longer matched. 
    3-I tried to walk them thru the process of changing the home address on the credit card, but they couldn't do it.  They assured me that they were doing it correctly and were still rejected.
    4-So, being the techie of the family, I simply logged into each of their iTunes accounts from my iPhone while I was out of town and made the address change.  While I was in their  accounts, I noticed they didn't have automatic downloads and iTunes match and stuff.  So, I changed it so it would work for them when they logged back in.
    5-I go back to log into my own account on my iphone and I cannot access my own songs on the iTunes cloud for 90 days!!!!  This is quite disappointing.
    How can I get this corrected?   I tried to reset user settings (not a erase and reset).  I figure it's not my phone, but my iTunes account thinks I'm doing something sharing-wise.
    So, in summary, when I am on my iPhone and I go to my iTunes library and click on a song (that I have paid for) with the cloud and down arrow beside it, it's rejected.  It says that I have too many apple id's associated with this device and I must wait 90 days.  It counts down each day.
    I just want access to the music I paid FOR!!

    Thank you-I will contact support.
    No, I cannot wait 90 days.
    Let me restate what I have to endure, even though I own the music and have paid for iTunes Match:
    I cannot access my purchases-zero-at all
    I have to listen to never ending McDonald's latte commercials and progressive insurance. I have now banned both of those annoying businesses and will not make purchases there.
    In summary, I have given apple my minded, and have zero to show for it.
    Ps-you get to hear the McDonald's "love hate commercial" every 2 songs on iTunes Radio.  I have substituted the words where I hate McDonald's and love when the commercial is over.

  • HT5622 i can't access my itunes account because there are too many devices attached too it?

    I can't access my itunes account because it says i have too many devices attached to it. I need to clear some if the devices that are associated with my account?

    Welcome to the Apple Community.
    Remove some of the associated devices using your account settings in iTunes.

  • Router connection problems - DISH satellite receivers or too many devices?

    (Sorry about that - I thought I had broken the message up.)
    I'm having significant issues with my Linksys router timing out, and need help. I'll try to be as detailed as I can.
    I have the following:
    - Linksys WRT54G v3 wireless router I purchased off eBay 3-4 years ago. Using 128-bit WEP secirity. Even though the model says WRT54G, my Linksys setup page says I have a WRT54GL. Don't know if that's pertinent but thought I'd include the info)
    - HP desktop running Vista Home Premium
    - Gateway Solo laptop (circa 3Q 2002) running WinXP SP3, and also have WPC54G - Wireless-G Notebook Adapter
    - Gateway M275 Notebook running Windows XP Tablet Edition w/SP3, internal wireless card
    - Linksys WRE54G Wireless Range Expander, v3
    My broadband internet connects to my cable modem, which then runs via ethernet to my router. I have my desktop connected to my router via (wired) ethernet cable (port 1), and the two laptops connect wirelessly. All three computers on my network run just fine and have had no connection issues until I had two (2) DISH satellite receivers installed this past Friday.
    Prior to installation, I knew I would need the two receivers hooked up to my network via ethernet cable. Since one receiver was in the same room as my router, it was easy to run an ethernet cable from my router to the receiver (port 2). I had a challenge with the upstairs receiver, because I didn't have a direct connection, and wasn't sure how to wire it. So, I used my range expander by plugging in the expander into a nearby outlet, then connecting the receiver to the expander via ethernet cable.
    I had some issues getting a good signal, and did some troubleshooting but made it work. Now I had five devices connected to my router: two with a wired ethernet cable and three wirelessly.
    I started having connection timeouts within about 3-4 hours of satellite [receiver] installation. All of the sudden I couldn't connect to the internet on ANY device; both laptops couldn't connect wirelessly, my desktop couldn't connect, and the receivers were telling me my connection was bad. I checked modem but there were no issues. Still, I unplugged the power cable from the modem for a minute, then reconnected - still no internet. I called my cable company to have them troubleshoot the modem, but they pinged it several times & got positive results - still no internet, so I ruled the modem out.
    I tried using the Windows connection troubleshooter to repair the problem, and got a DNS error message (which I don't know how to fix). I decided to unplug my router for 10-15 seconds, then plug back in - that got my internet connection going again. That lasted a couple hours & then failed. I unplugged the router again (is that a soft reset or a power cycle?), then reconnected & was able to connect to the internet. This happened a few more times over the weekend, and finally I decided the expander might be the issue (both DISH and Linksys tech support was not very helpful).
    I found a way to wire my second receiver via ethernet cable (port 3), so now I had three wired devices, and two wireless devices. I thought this would fix the problem; it didn't, but at least I learned how to wire CAT5 cable. So I got that going for me... which is nice.
    I plugged the ethernet cable directly from my modem to my desktop to test the timeout, but had no issues - the modem just wasn't the problem.
    I was getting some IP address conflicts on my Norton Inernet Security, so I uninstalled that from my desktop, disconnected the power from the modem, disconnected the power from the router, shut down all devices, reset the IP addresses on the receivers, deleted the wireless connection from the laptops, shut down the desktop, and just left the whole mess alone for half a day. Then I reinstalled the Norton Internet Security, connected my wired devices, plugged the modem in, plugged the router in, reset my security, connected wirelessly with my laptops.
    Within an hour my connection timed out.
    Trying to chat with tech support wasn't feasible, as my connection kept going out. A guy at work said I shoudl ping my IP address, and let it repeat until my connection goes out. So I unplugged the router and plugged it back in to get an internet connection, the opened a cmd prompt and typed
    ping 192.168.1.1 -t
    I left it alone for a few hours, and when I came back, my internet connection was down, but I was still getting active pings - no problems there.
    At this point I thought I had done everything except replacing my router (which I'm still tempted to do), but I called my broadband provider to see if there was anything they could do. One of the techs said I had too many devices connected to the internet, but I thought these routers were supposed to handle dozens of devices?
    I finally called Linksys Tech Support and had a conversation for 90 minutes. We went through all the steps of unplugging the the modem, router & all connected devices, resetting the router, etc, etc. The only thing different he did was had me change my security from WPA to 64-bit WEP, and added passwords for DNA1 and DNS 2 (same password for each).
    That was at 1:30am last night, and when I woke up to check my connection this morning, it was still connected. I have to check it again when I get home, but I'm wondering if I should just be prepared to get another router (and if so, any recommendations), or if there's something I'm still not doing that could resolve my issue - if I still have connection losses.
    Also, I'm concerned about the security thing. If changing from WEP 128 or WPA to WEP 64 fixed my problem, I'm not sure I feel completely protected from intrusion - isn't that pretty much the least amount of security I can have (without forgoing it altogether)??
    Finally, I've read a few threads suggesting possibly changing to static IP from DHCP; however, my satellite receiver installation documentation specifically advises against this for the receivers.
    Anyway, I would very much appreciate some help.
    Message Edited by CKdoubleU on 10-01-2008 08:43 AM

    First please break that long text into separate paragraphs. No one wants to read one long runon sentences
    With Knowledge… Impossible means nothing.
    Credentials
    Computer experience: 11 years
    Cisco networks experience: 8 years
    Network administrator: 6 years
    N.E.T. networks experience: 6 years
    Linksys networks experience: 6 years
    Recent additions: A+ | Networks+ | Linux+ | Security+

  • I just bought a macbook and tried to add it to my home share but got a message that there were too many devices.  How do I deauthorize machine I nolonger have?

    I just bought anothe macbook and tried to add it to my home share but got a message about too many devises.  How do I deauthorize machine I no longer have as I am sure some of those I threw out had itunes?

    You'll have to log in to your iTunes account. On the Account Information page click on the 'Deauthorize All' button. You will have to re-authorize all the computers you presently want to associate with the iTunes account. (See screen shot below.)
    In the future, to avoid having to deauthorize all and then re-authorize, select 'Deauthorize This Computer…' from the 'Store' menu on the computer you no longer want to use with the iTunes account.

  • TS1702 I have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2.  I can get no further as a report code keeps appearing saying too many http redirects so I can not get any furthe

    I have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2.  I can get no further as a report code keeps appearing saying too many http redirects so I can not get any further.
    I have also sent 3 emails to the company if Smart Office 2 with no response.
    How do I report my dissatisfaction which is growing with the frustration of not being able to contact any one!
    Zena Parton

    I have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2.  I can get no further as a report code keeps appearing saying too many http redirects so I can not get any further.
    I have also sent 3 emails to the company if Smart Office 2 with no response.
    How do I report my dissatisfaction which is growing with the frustration of not being able to contact any one!
    Zena Parton

  • Digital Editions: The account you tried to log in with is activated on too many devices.

    Digital Editions: The account you tried to log in with is activated on too many devices.
    How do i reset it???
    Chat does not run, my english is not got enough to call the hotline.
    I didn*t find out how to contact adobe support by email :-(((
    So, what can i do?  Please help.
    Otherwise, i can not read my ebooks any longer :-(((

    The only people that I'm aware of who can reset your activation count is
    the Adobe Help line that you call.  And many of those people have to be
    told that it is their job.  This forum does not have the ability to forward
    posts to Adobe technical support to get these kinds of problems resolved.
    Trust in your English - or perhaps have a friend that speaks English better
    do the talking.
    I have to ask what you have been doing that used up all of the
    activations.  We need to fix the root of the problem.
    =================

  • T400 win xp clean, installed everything....but still complains about a pci device driver?

    I did a t400 clean install and I have followed instructions to install every driver but it still complains about a PCI device not found.  Looking at my device manager there is no unknown devices...everything is already installed.  But everytime I start my computer the first thing that pops up is a notification stating that a PCI device is found.  Anyone have any ideas?
    Solved!
    Go to Solution.

    Hi,
    You should take look at this.
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70665
    By the way, why this information is not filed under "Operating System Installation" on Lenovo Support & Download page... 
    Best regards,
    winningblue
    T400 2764CTO T9400 2.53GHz/3GB/160GB/14.1 WXGA+/ATI3470/Bluetooth/WiFi Link 5300/6 cell/XP SP3

  • Too many devices

    I received an error message when trying to authenticate my Kindle device to use Overdrive that I had too many devices authenticated to my ID.  What can I do?

    This is a question for the DIgital Editions forum It has nothing to do with Reader.

  • Trying to sync iPhone with iCloud.. says too many devices.Remove one

      What is the process to remove iOS devices from your iCloud.  Trying to sync iPhone with iCloud under the settings and it says too many devices.  Remove one.
    Thanks

    I suspect the message is referring to you having too many devices associated with the Apple ID you are using for iCloud.  You can have a maximum of 10 devices associated with an Apple ID, 5 of which can be computers.  This article explains how to remove a device from your Apple ID: http://support.apple.com/kb/HT4627.

  • We can't sign you in. Looks like you're already signed in on too many devices

    Everytime I open Lync 2013 client on mobile I get this message:
    "We can't sign you in. Looks like you're already signed in on too many devices"
    I tried to increase the maximum endpoints allowed for the users but still I get this message for all the users who are using Lync 2013 on mobile, sometimes we get the same message for the Lync Client for PC.
    Does anyone know how to stop this? Because everytime this message pop up, the Lync client sign out!

    Hi,
    Please try to restart the Lync FE server and BE server to check the issue again.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Sean Xiao
    TechNet Community Support

  • Synching to too many devices!!

    I have an iPad and two iPhones and the synching between devices works great, trouble is, when I send an iMessages, all three receive them, however my daughter has one of the iPhones and I would rather she not be privy to my personal messages. Is there a way to keep that phone on my account ( the ability to FIND MY PHONE) if I need to check where she is is invaluable and I do not want to lose that feature, however I do not want to share messages!
    Any help would be appreciated,
    cheers

    Well the problem is restoring my iCloud backup to too many different devices.  Similar issue as changing the iTunes account, just a different subject of change.

Maybe you are looking for

  • WRT610N RIP version and SNMP

    I just bought this router ... Never experience the overheating problem posted by other users, router is pretty cold, even after 3 days on In Italy the street price is quite expensive (180€ / 232$) but works great on 2.4G (5G suffer serious lack of co

  • XSLT mapping not working b'coz " " & " " replaced with and

    Hello Experts,   I have a RFC to JMS scenario. One of the parameter of RFC is a string field. This field will contain the XML data in it. I need to create a complete XML payload using this data in a string field. For this I am using XSLT map : <?xml

  • Difference between Invoice Date, GL Date and Accounting Date Oracle AP

    Hello, I have a question that might help a lot of people too later. I tried to run these queries select aia.INVOICE_ID from AP_INVOICES_ALL aia, AP_INVOICE_DISTRIBUTIONS_ALL aida where aia.INVOICE_ID = aida.INVOICE_ID and aia.INVOICE_DATE <> aida.ACC

  • I cannot view some photos in iPhoto' 11

    I installed 10.7 successfully but some photos in my iPhoto library do not show.  Some events show blank and their contents show blank with a triangle containing "!".  I know the photos are there as they show up momentarily as I scroll the screen.  In

  • Borders by "chance"

    hi all, borders are a hard thing also in numbers '09. if i select a few cells an select a border with the inspector it works not proper. i can not figure it out why some cells not work with the selected border. are borders still a hard thing ore do i