HT1414 can I restore my iphone4 to its factory iOS version?

can I restore my iphone4 to its factory iOS version?

If you are having a specific problem with iOS 7?
We may be able to help.
If you simply dislike the look then no one here can help but you can leave Apple your feedback here.

Similar Messages

  • I can't restore my system to its factory condition.

    hello all
    i have Pavilion DV6 laptop, my HardDisk is dmaged and i can't boot anymore (because of the physical BadSectors) , so ibought a new HardDisk ( 1TB )
    when i plug my old hard disk into another PC , i can see the 3 partion's
    1 : C:\[system]
    2 : D:\ [Recovery]
    3 : E:\ [HP TOOLS]
    i can fully browse them , so i just copied all the files in the partion D:\ ( which contains the Recovery Files) to my new Hard Disk
    ( i made a new partion with enough free space for the recovery files )
    i done that by showing the hidden files and the system hidden files and then copy , the original size of the Recovery files are the same with the new one (near 19 GB) so i just installed a new Windows 7 (32bit) in my New HardDisk (the old system was windows 7 64bit but i have windows 7 32bit CD Available so thats why)
    and i also downloaded and installed HP Recovery manager to restore my laptop to its factory condition,but when i run the recovery manager,i got an error message(HardDisk.dll is missing) i downloaded that .dll file , next time i got another error (PRRC.dll is missing) i downloaded that file too , finally when i ran the Recovery manager from my Desktop i got a Turkish message ! , while my system language is arabic
    see here : http://imgur.com/WzrMDD2
    and when i reboot and Press F11 To start the Recovery manager, it starts normally but i can't click on the system restore ! , i also can't reset my laptop to its factory condition, the buttons are disabled see here : http://imgur.com/7JYwO8B i can only click on Run Computer checkup and Show Contact info
    should i install a 64 bit system and try the Previous step ? , or is there any missing files that i should copy into the D or C ?
    please guys help me to restore my system , the old HardDisk is Dmaged and not bootable anymore so i don't want it

    Hello MohammedFawzi.  I understand you're trying to recover your notebook to factory conditions.  
    If you're unable to perform the recovery the normal way I suggest ordering a set of Recovery Discs directly from HP.  This will not only reinstall the operating system but will also recreate the partitions (including Recovery), install drivers, and most of the software.
    To order the discs you'll need to contact HP Support in your region.  You can visit HP Support Worldwide to locate your region's contact information.  
    I hope this is helpful.  Have an amazing week!  
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • How can i restore macbook pro to its' factory settings?

    i wanna restore my mac to its' factory settings. how can i do this??
    thanks for help

    Use its original disks to erase the drive and install a new OS.
    (60804)

  • Can you restore your iphone4 with no sim

    can you restore your iphone4 with no sim - my son wants to use it like an ipod...

    no, you cannot.  However, the SIM doesn't need to be active.  An old deactivated SIM from the carrier to which the phone is locked (if the phone is locked) will do.

  • I have a I MAC i bought in 2004 and I am having all sorts of problems.  How can I restore my computer to its original form?

    How can I restore my computer to its original form or update my operating system?

    vincenzofromhenderson wrote:
    How can I restore my computer to its original form?
    See Erasing disks securely 
    Start up from your install disc, go to Disk Utility and select the disk and click erase - to securely erase data click Security Options and Erase Free Space which will entirely wipe your disk, overwriting it with zeros so that no data is recoverable.
    Restoring your computer’s software

  • Can I restore the software to its original version?

    Can I restore the software to its original version? My iPhone 4S is only 8gb and i think d new version is eating up the memory size.

    Afraid not. Downgrading the iOS is not an option. Neither should it be eating memory - you might like to look elsewhere for the cause of a memory problem.

  • I am in process of restoring an iphone4 to its default settings after getting approval from my carrier to unlock it. Using itunes, it is saying "verifying iphone restore" and hasbeen stuck there for about 2 hours.

    I amtrying to restore an iphone4 to its original default settings after obtaining approval from my carrier.  I am using itunes and following instructions given.  It has been stuck on "verifying iphone restore for about 1 1/2 hours with no movement in the bar across the phone itself.  Task manager is showing very little activity.  I have internet connectivity.  Is this an issue here or with apple?  Thanks.

    Thanks.  Finally unhooked the phone and then tried again.  This time it went into recovery and reloaded all as it should have and gave me the "unlocked" message which was what i wanted to see!  thanks

  • HT201210 i can't restore my iphone4 from 5.1 to 6 and it stuck in recovery mode need help

    i can't restore my iphone4 from IOS 5.12 to IOS 6 and it stuck in recovery mode need help please

    Read here > http://support.apple.com/kb/HT1808
    Hope that helps.

  • I no longer have sound for either my audio books or my music on itunes.  I've tried everything--restarting, updating, re-installing audible app, and restoring the iphone to its factory settings--nothing helps.  How do I get the sound back?

    How do I get the sound back on my iPhone 4?  I've tried all the fixes such as restarting iPhone, reinstalling the audible app, and finally yesterday, I restored the phone to its factory settings.  I still get no sound from music on iTunes or from my audible books.  The phone still rings (I have sound for that) and the voice control speaks to me, and when I'm typing, the automatic text voice speaks so I can hear it but nothing else works. 

    Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer.  As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
    You can try and find 3rd party applications that might help you.  I'm sure you'll pay, however.
    Let this be a very important lesson learned.
    Best.

  • I recently backed up my iphone to itunes, when after backing up a message showed that I needed to update my iphone. I clicked ok, and after updating, it said I had to restore my phone to its factory settings. I cannot find where it backed up pictures

    I recently backed up my iphone to itunes, when after backing up a message showed that I needed to update my iphone. I clicked ok, and after updating, it said I had to restore my phone to its factory settings. I cannot find where it backed up all of my pictures from my phone.

    If you backed up the device, all the data is in the backup. Restore the backup.
    A better question is why would an intelligent person not copy the pictures from the device to the computer regularly, especially before attempting an update, as the device is designed to be used?

  • How can I restore my iPad Air to factory settings as I don't have internet on my laptop. After I erased everything from settings. It shows to restore n update through Apple server. Pls help me how to restore it to factory settings.

    How can I restore my iPad Air to factory settings as I don't have internet on my laptop. After I erased everything from settings. It shows to restore n update through Apple server. Pls help!

    Without internet connection there is no way for you restore the iPad.

  • I am selling my iMac but would like to restore it back to its factory settings! How do i do this?

    I am selling my iMac but would like to restore it back to its factory settings! How do i do this?

    If you use iTunes to buy music or Apps for an iOS device run iTunes and Deauthorize your computer. Do the same with the Mac App Store program.
    If your computer shipped with Lion you'll first want to need to restart the computer with the Recovery Partition (hold command R while you restart the computer) Once you've booted select the option to format the hard drive and then select the option to install the OS.
    If your computer shipped with an earlier version of the OS, restart your computer with the system disk. Select Disk Utilities from the menubar options and format the hard drive. Then select the OS install option and install the OS.

  • Can You Restore Group Policy to its Deafault Settings

    I was wondering if you can restore Group Policy to its default settings with no GPO's or anything (except of course for the deafult two)?
    Thanks for the help.

    You can use the DCGPOFIX.EXE utility (see
    http://technet.microsoft.com/en-us/library/cc736813(WS.10).aspx) to return the "Default Domain Policy" and "Default Domain Controllers Policy" back to their default settings. If you do decide to do that, be sure you save a copy of the settings report from
    the GPOs as they sit before you run DCGPOFIX so that you can create addt'l GPOs with your customizations in them.

  • How can I restore my iphone when Its disabled and itunes wont connect to it?

    My phone is disabled and when i pulg it in it wont come up on itunes and i dont have "find my iphone" how can i restore it??

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • What does it mean when you can't restore your iPhone4?  After I run "restore" I receive a message telling me my phone is in recovery mode and I must run "restore"  HELP!

    I can't restore my iPhone 4.  It went nuts today.  Went to "voice control", called people on my contact list, home button is dead.  Thought a sync would help. New software available.  Did download.  Can't load anything.  Phone in "recovery mode"  do restore.  OOPS!  I did restore, and then am told the phone is in recovery mode, do it all again.  OK I have.  Same message.  HELP!

    Thanks Larry.  I ended up at the genius bar at the local Apple store.  My home button had died which is why the phone was constantly going to Voice Control.  The phone was replaced.  Thanks for answering.  I checked out the link and ordinarily that would have done the trick.

Maybe you are looking for

  • Skip first screen when calling transaction via  BDC

    I need to use BDC to call transaction FD32 and suppress the first screen. Do I need to set BDC_OKCODE? However, when I set BDC_OKCODE to '/00', this error occured, "System error: Error in routine DYNPRO_ERSTES_BILD". Here is my code: CLEAR ls_bdcdata

  • Content Conversion in File Receiver Adapter

    Hi, I am doing a Content Conversion in File Receiver Adapter. Input to the Adapter is: <ns1:FileResponse_MT xmlns:ns1="http://www.bpmtest.com/bpm">      <OrderID>123</OrderID>      <Quantity>98</Quantity>     <Price>76.23</Price> </ns1:FileResponse_M

  • List-Items (Type=URL) - how to open in New Window

    I use a List for deliver information in a region. The list consist of some URLs. I would like to open a new Window (not use the active Window), if one element was clicked. With html-text-region I could user "target=...", but this is not usable in the

  • Concatenating context value and non-context value

    Hi, I have a context binding to one of the input field(lets say field-X) and also I have another dropdown list UI element(lets say field-Y) which is not bound to any context.  When a user enters values in field-X and selects a item from field-Y hits

  • Art brush not following path

    I have an art brush that I created to achieve an offset on an open path.  In some location the brush doesn't follow the path.  I have attached an image.  The narrow pink line is the actual path.  The thicker pink line is the art brush I created for t