HT1414 hi everyone , having trouble with restoring my iphone, i did follow the step untul extracting the update software but when the iphone start to restoring my iPhone always turn off and it say Error 21 on my PC monitor ...please help me icannot get my
hi everyone , having trouble with restoring my iphone, i did follow the step untul extracting the update software but when the iphone start to restoring my iPhone always turn off and it say Error 21 on my PC monitor ...please help me i cannot get my iPhone turn on
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Similar Messages
-
My Ipod 3rd generation wont turn off and is showing a blank white screen someone please help
My Ipod 3rd generation wont turn off and is showing a blank white screen someone please help! xx
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my ipod is 4 gen and its system is 4.3.3 i want to update to the new ios 5 but when i finish downloading it, an error comes up about network settings. what should i do?
Well this isn't making sence.
What is the model # on your extreme? -
When i update my iphone it say error 1015 what is this please help me
when i update my iphone it say error 1015 what is this please help me
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
http://support.apple.com/kb/TS3694#error1015. -
im having trouble with my email. usually i drag emails i want saved to various folders. recently, some of the folders have changed their appearance - looking like a camera body, and less like a folder. these icons seemed to be locked as well, so i can no longer open those folders. help please?
Ah, now i see that the folder has an icon on it - like a "settings" icon - sort of a wheel
-
I have an iPhone 4S that won't charge. I have tried with 5 different cords and 2 wall plug but it won't connect. It will work if I plug and unplug my phone for 20 minutes. Please help me! Do I need a new phone or is this something that can be fixed?
Clean out the charging port--make sure there's no dust or debris in there. If that fails to solve the issue, bring the phone to Apple for evaluation.
-
help
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Someone has Stolen my iPod touch and they turned off Location Services I used iCloud To Lock it Please Help
How can we help?
If they turned it off, you are hosed.
Allan -
TO EVERYONE HAVING TROUBLE WITH GATEWAY IP'S
If you are having trouble connecting to the internet but have no problems resolving within your LAN, try the following, it worked for me:
At the command prompt, type:
# route add default <gateway IP address>
This will change the default gateway from your local host to teh LAN gateway.
Have fun
JeffWhat if that doesn't solve the problem? =S
I've been having the same problem and I've tried like every possible solution that the apple support gives (totally deleting and reinstalling apple products, verified the driver, checked for viruses, disable every program that could prevent Itunes from reading my Ipod, changing usb ports, etc...) but NOTHING has solved it. It's kind of frustrating, it's been more than I week trying to solve this and nothing yet.
The only thing I can say for sure is that it isn't about the ipod, because I tried with another pc and it worked.
Please find a solution!!
Thanks -
TS1702 Is everyone having trouble with the live lucky bingo game?
Is anyone having trouble getting into Live Lucky Bingo Game?
You might get more assistance if you simply post what the issue is. The odds of just finding an active forum user who happens to have that app, and an issue with it, are pretty small.
-
please help
It sounds like you have assigned the primary click on the trackpad to something else, perhaps a gesture.
Use your mouse, login and then open the Trackpad preference pane and see how you have the interface configured.
Oh and you can have both the Magic Mouse and Magic Trackpad powered up and working at the same time. No need to keep moving batteries around.
Tom -
I have a Gateway computer with Windows 8 installed. I have installed Dreamweaver CS5 to manage my website and it won't stay connected to the server. It also won't play flash and says I need a flash plug in. Please help
#1 Try toggling Passive FTP on/off in your remote server's site definition.
#2 Except for a handful of gaming sites, Flash is a dead web technology. It's not supported by iPhone, iPad, iTouch, Android, etc... I don't recommend using Flash for anything these days. Better to use HTML5, CSS level 3 and JavaScript.
Nancy O. -
just purchased elements & photoshop 13. We are having problems with certain parts of it. Are we allowed to uninstall and reinstall. Was not sure what the agreement allowed. help!!
Yes, feel free to uninstall and reinstall as many times as you feel necessary. However, this doesn't often fix problem (unless the install process didn't work in the first place or that files have become damaged or are missing since the install process).
-
Hey Hi, to apple Family.
Few days back, when i was doing some normal work on MS word, i found that i my paste option is not working.
Then i tried to use it for normal work like Moving Pics from here and there, but still found the same result.
When i try to select anything and then copy/cut anything, it got the intial action, but when i got to paste it anywhere, it won't do the action, and after checking in status bar, (above), It shows Paste option Faded, like i can't use it.
If some one from Users or any one From Apple Support can help me please do the need full done.
I have lotss of data in my Macbook, and i need to move it to somewhere else.
Please Help me.
Regards
Deepanshu KaushikHello, Deepanshu,
Besides the good advice so far, might try this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
why does music skip around & not play in order in library? since latest update is there a shuffle feature & if so how do i turn it off? thanks for the help!
Hi henry1963,
Welcome to the Apple Support Communities!
It sounds like your are correct and shuffle is turned on in iTunes. Please use the following article as a reference for turning shuffle off.
iTunes 11 for Mac: Ways to play songs
http://support.apple.com/kb/PH12131
You can play music in iTunes in various ways.
Shuffle or repeat songs
Do any of the following:
Turn shuffle on or off: Click the Shuffle button. Shuffle is on when the arrows are blue.
Shuffle albums or groupings: Choose Controls > Turn On Shuffle > “by Albums” (or “by Groupings”). iTunes plays the songs in the order in which they appear on the album or in the grouping, and then chooses another album or grouping at random.
I hope this helps,
-Joe
Maybe you are looking for
-
Unable to detect Hyper Threading of CPU SL6WE 3.2 in MSI-865PE Neo2
Hi! I am new to this forum and need some help. I have just installed a Intel Pentium 4 3.2GHz Northwood SL6WE 478 800MHz/512k . I bought this on e-bay and understand that this cpu supports hyper threading. I have enabled hyper threading in the bios,
-
Emergency contact iview in BP MSS 1.41
Hello, We have a Portal landscape which is NW 7.0 with EHP1 (SP 5) with Oracle 10.2.0.4 running on AIX 6.1. Now our EP Dev team is looking for Emergency contact iview and not able to find the same. As a result of that we did some search and found tha
-
User exit in Delivery after the SAVE button is pressed.
When the Delivery gets picked and Post Goods issued , the Delivery quantity for example instead of 48,000 LBS may be little less say 47,345 LB. We need to update this number in the order quantity which will originally have 48,000 LBS. I need to updat
-
I can't open Firefox.
-
T520 will not use any DVD Device
Folks, I was going to do a backup, when I noticed the DVD player was no longer showing under My Computer. I when into the device manager, where it showed with a yellow X .. I tried updating the device driver, it said I already had the correct device.