HT1414 Hi there, my I pad series 2 has a black screen, it will not power up when attached to a laptop, and only shows black screen and Apple icon when attached to a mains power source. Any thoughts please? Allan

Hi there my Ipad 2 has a black screen, will not power up and will only have an Apple icon when plugged into a mains power source. It will not power up when connected to a laptop. Any thoughts please?
Regards,
Allan

Hi there,
You may find the troubleshooting steps in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W. 

Similar Messages

  • My phone went blank.  It still had 41% battery life.  I have tried to reset by holding down the sleep button and botton on top until the Apple Icon appears but then after that, nothing.  Any ideas?

    I had just checked my phone and it had 41% battery life left. A few minutes later, it simply went blank and won't do anything. I tried reseting it by pushing down on the wake/sleep button and the button on top until the Apple logo appeared, but that didn't help.  Any ideas?

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • When in I tunes the Genuis recomendations has not refreshed since I intalled the newest version.  Only show 5 covers and only 2 song tiitles.  Never gives me new choices which I do use for finding new music.  Any ideas out there?

    When in Itunes the Genuis recomentations do not refresh at all ever since i installed the new version of Itunes.  The same two songs and the same 5 cd cover have been there and do not change like the did before.  I do like using it for new music that I may not have heard before.  Any clues? Thanks.

    I agree... I am trying not to whine... but be helpful to others if they experience the same while get input before I make the decision to return (which I am leaning towards)… It’s still a great phone – but I expected something different. I also have been coming the internet and forums to see what other people think as well to make sure I am not being oversensitive about it. $300 for a 16gb is not buyers remorse kicking in… it’s just I am not sure if I see much of a difference from my perfectly good (8month old) iPhone 1st generation…
    But yes… if all iPhone 3G were problematic it would be in the news… so I err on the side that I may be a unique situation or simply did not make a well informed decision when going to 3G.
    Still… the idea of turning 3G off to get a full day of use out of an iPhone… even moderate use that most of us would expect w/o charging midway or multiple times is a bit much to swallow.
    I don’t want to bash and just looking for peoples reaction. I still really like Apple and the iPhone in general.

  • Having purchased an itouch 4 and installed itunes 10.5 for my daughter i cannot copy films into itunes. even though ialways did with my itunes and her ipod. Any thoughts please?

    Having purchased an itouch 4 and installed itunes 10.5 for my daughter on her laptop i now cannot copy films into movies on itunes. Even though I always did with my itunes and her ipod on my laptop.
    Any thoughts please?

    Have uninstalled then re-installed iTunes and it sees my iPhone but doesn't show the battery state.
    I have rebooted my laptop and, guess what, iPhone is now NOTseen! Who designed this software, an idiot? Oh, I forgot Apple programmers don't know anything about Windows especially Windows 7. I still think this has to do with the differing formats as if there are pictures on the iPhone, Windows sees it as a camera and it is possible to see the pictures in Explorer, so these must be stored in FAT format. Maybe someone needs to design the phone to tell Windows that it's a phone and tells Windows to load the correct drivers. Maybe that's too difficult!

  • Mac book pro tracking pad not working any thoughts please

    On my mac book pro one year old the track pad has stopped working  cursor moves around the screen but unless I press pretty hard of the bottom left hand corner nothing is selected .... Any thought please.   Cheers.  

    Mountain Lion 10.8
    Tap to click enabled?
    System Preferences > Trackpad > Point & Click
    Tap to click

  • I have my home wifi working ok, full signal, wifi switched on, on my iPad, but I can not go on the Internet, message, FaceTime, etc. Any thoughts please ???

    I have my home wifi working ok, full signal, wifi switched on, on my iPad, but I can not go on the Internet, message, FaceTime, etc. Any thoughts please ???

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I am having a problem moving across cells in Microsoft Excel. When I use the arrow keys, the sheet moves, instead of moving to the next cell. Would anyone have any thoughts on this, please?

    I am having a problem moving across cells in Microsoft Excel. When I use the arrow keys, the sheet moves, instead of moving to the next cell. Would anyone have any thoughts on this, please?

    Hi,
    Did you find a way to solve your problem ? We have exactly the same for one application and we are using the same version of HFM : 11.1.2.1.
    This problem is only about webforms. We can correctly input data through Data Grids or Client 32.
    Thank you in advance for your answer.

  • Have 60 gig ipod classic will power up will go to songs but will not play any songs just sits there on 0 I can fast foreword but it still will not do a thing just sits at new spot in song help please.

    Have 60 gig ipod classic will power up will go to songs but will not play any songs just sits there on 0 I can fast foreword but it still will not do a thing just sits at new spot in song and will not play , help please.

    Update!
    This is what I did to fix both the skipping songs problem and the iPod verifying forever & not able to restore problem (because of iTunes 9):
    a) I used Disk Utility to reformat my iPod while in Disk Mode using the instructions here:
    http://support.apple.com/kb/HT1363?viewlocale=en_US
    and here:
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml#backup
    b) Do not unplug your iPod after reformatting (mine showed up as a firewire disk) - simply launch iTunes ( I went back to 8.2) and follow the Restore instructions here:
    http://support.apple.com/kb/HT1339
    iPod is recognized, syncs and doesn't skip songs anymore after that miserable experience with iTunes 9!!!

  • Is there a way to stream Coachella? I found last years stuff but no live stream so far. I tried to us my kids iPad but the YouTube Coachella channel requires flash.  Any thoughts?

    Is there a way to stream Coachella? I found last years stuff but no live stream so far. I tried to us my kids iPad but the YouTube Coachella channel requires flash.  Any thoughts?

    Try opening this link on your phone: http://m.youtube.com/#/user/coachella?client=mv-google&reload=3&rdm=m2075q4mp. It doesnt work on the Macbook but it works on my phone..
    FYI the resolution / quality when airplaying from iPhone to Apple TV was atrocious!
    if you figure out how to get it going good on the Apple TV let me know!

  • Western Digital My Book World EditionI have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way i get the message 'There was a proble

    I have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way I get the message 'There was a problem connecting to the server "MybookWorld.local" The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem'
    It is a brand new iMac and running Lion OSX
    Any ideas on how to solve would be gratefully received?

    Followed the directions on this page and it worked!
    http://forums.macrumors.com/showthread.php?t=1102423
    Part One - Turn on SSH (in the admin panel)
    [1] Go to to http://mybookworld.local
    [2] login: username will be admin, password will be whatever you have setup. If you can't remember it should be in your Mac OS X keychain (Utilities > Keychain Access, search for "mybookworld"). If you have not changed if from the default the password will be admin as well.
    [3] Switch to advanced mode.
    [4] From the System tab, pick Advanced.
    [5] Enable SSH Access, and click submit.
    [6] Click on the network tab and then the LAN button
    [7] Make a note of the IP address
    Small, maybe obvious, but nevertheless important point: For the install to work, your NAS needs to be connected to a router with internet access.
    Part Two - Install netatalk2.2
    [8] Open Terminal.app (Utilities > Terminal)
    [9] Enter the following command (substitute in 127.0.0.1 for the actual IP address you noted down in step 7), then hit return:
    Code: 
    ssh [email protected]
    [10] When prompted, enter the ssh password (will be welc0me).
    [11] You are now going to download the installer. Enter the following command, then hit return:
    Code: 
    wget http://mybookworld.wikidot.com/local--files/netatalk2-2-on-whitelight/install_netatalk.sh -O install_netatalk.sh
    [12] Once completed, you will need to run the installer. Type:
    Code: 
    sh install_netatalk.sh
    [13] You will be asked a number of question during install, answer yes to all. When asked about the "DHX2 login process", I opted to install the modified version, so I can confirm it works.
    [14] Once the box has restarted, you should be able to connect to your afp shares and continue to use Time Machine.

  • HT4718 I can't reach recovery system when I reboot- I press 'command' and 'r' quickly, but nothing happens, the progress bar begins to load... Any thoughts?

    I can't reach recovery system when I reboot- I press 'command' and 'r' quickly, but nothing happens, the progress bar begins to load... Any thoughts? It gets about halfway through loading and then stops, no mouse, no nothing. I think I'll be able to move past it if I can reach the Recovery options.
    Thanks!

    If you are really sure that it's impossible to click in Recovery mode, then something is wrong with the machine.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • When I download photos from a flash drive,everything is fine and they show in Events and Pictures, but when I click on the individual pic I get an error message saying that it cannot locate the JPG. Any thoughts?

    When I download photos from a flash drive,everything is fine and they show in Events and Pictures, but when I click on the individual pic I get an error message saying that it cannot locate the JPG. Any thoughts?

    It sounds like your iPhoto Advanced preferences are set to not copy photos during import, i.e. a Referenced library:
    Check your Advanced preferences to see if that's the case. If it is the best solution would be to select the checkbox to copy the photos and reimport the photos from the flash drive.  Then check the new import. It it was OK you can delete the previous event with the "missing" photos.
    OT

  • Can no longer print from Photoshop CS^ have upgraded drivers error message reads There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."

    I have upgraded my iMac to Yosemite but now my two Canon Printers no longer print from Photoshop CS6. I have upgraded the drivers. All other applications including Lightroom are fine. I am receiving an error message as follows:"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." How can I get the OS to return a list of printers to Photoshop when Photoshop requests a list.

    Have you printed to this printer from 10.10 before?  If so, check your connections.

  • There is a 3 inch section of the window that will not recognize the mouse. It will not let you click on the icons or screen in any way in this section under the address bar. It is only in firefox where this is a problem

    There is a 3 inch section of the window that will not respond or recognize the mouse. It will not let you click on the icons or screen in any way. This is the only program we are experiencing this problem with.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents. Error message in PhotoShop CC

    Printing from PS CC worked fine today. I made no changes to preferences. In between working with 2 projects, the first one printed fine, the second gave me this Error Message.
    There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
    Now I've checked for updates for my printer, reset my printer, reset PS CC preferences, picked my printer as Default and Last Used, and rebooted. I've followed all the recommended fixes for this issue I could find here and on the internet. I can print fine from any other program. Alas, the error message keeps popping up and I can't print.
    PS CC is up to date
    Running OS 10.10.2
    HP Printer updated
    Help?

    Have you printed to this printer from 10.10 before?  If so, check your connections.

Maybe you are looking for