Western Digital My Book World EditionI have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way i get the message 'There was a proble
I have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way I get the message 'There was a problem connecting to the server "MybookWorld.local" The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem'
It is a brand new iMac and running Lion OSX
Any ideas on how to solve would be gratefully received?
Followed the directions on this page and it worked!
http://forums.macrumors.com/showthread.php?t=1102423
Part One - Turn on SSH (in the admin panel)
[1] Go to to http://mybookworld.local
[2] login: username will be admin, password will be whatever you have setup. If you can't remember it should be in your Mac OS X keychain (Utilities > Keychain Access, search for "mybookworld"). If you have not changed if from the default the password will be admin as well.
[3] Switch to advanced mode.
[4] From the System tab, pick Advanced.
[5] Enable SSH Access, and click submit.
[6] Click on the network tab and then the LAN button
[7] Make a note of the IP address
Small, maybe obvious, but nevertheless important point: For the install to work, your NAS needs to be connected to a router with internet access.
Part Two - Install netatalk2.2
[8] Open Terminal.app (Utilities > Terminal)
[9] Enter the following command (substitute in 127.0.0.1 for the actual IP address you noted down in step 7), then hit return:
Code:
ssh [email protected]
[10] When prompted, enter the ssh password (will be welc0me).
[11] You are now going to download the installer. Enter the following command, then hit return:
Code:
wget http://mybookworld.wikidot.com/local--files/netatalk2-2-on-whitelight/install_netatalk.sh -O install_netatalk.sh
[12] Once completed, you will need to run the installer. Type:
Code:
sh install_netatalk.sh
[13] You will be asked a number of question during install, answer yes to all. When asked about the "DHX2 login process", I opted to install the modified version, so I can confirm it works.
[14] Once the box has restarted, you should be able to connect to your afp shares and continue to use Time Machine.
Similar Messages
-
i lost my iphone 5 and i don't have i tunes.can i use my phone number or any other way to get the serial number?
No.
Serial number is available If you have:
1. The iPhone box when you bought it, if you still have it.
2. The receipt, where you bought the iPhone
3. Computer iTunes, if you have synced or backuped the iPhone.
4. https://supportprofile.apple.com if you have iPhone registered -
Is there any other ways to get the Windows support software?
Hi guys, I encountered some problems while downloading windows support software using boot camp assistant. This keeps showing up:
I have tried over 10 times, even with VPN connected. But it failed every time at this point, very frustrating. Is there any other way to get windows support software? Maybe a third party website to download?You can try downloading Windows support software from this page > http://www.cafe-encounter.net/p682/download-bootcamp-drivers
I tested the links and they work. However, this must be the last thing you should try as packages may be modified (now not, because they are from Apple servers) -
I got a new iphone 4 3 days ago. YAY! Got it all set up, downloaded some apps etc, and it kept crashing.
I took it back into the store and they replaced it. Today however, I tried to download some apps, and it keeps prompting me to log into my apple id. When I do, I enter my password etc... then I get to the part for payment, and using the same credit card I used for the first phone i input the exact info that worked for the first phone. It keeps telling me "SECURITY CODE IS INVALID" but I KNOW I am entering this number correctly.
Are you only allowed to use a credit card once? Has my second phone crashed? What gives?
Thank you for any help... I am new at this and not so good...Launch iTunes. From the menu bar click Store / View My Account
Click: Edit Payment Information
Make sure you have the correct Security Code.
Then click: Done
And try resetting your Apple ID password. https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa -
Hi can anybody help or advise me? I've recently bought the i-phone 4s, I've set up my apple I.D and password but everytime I try and log in it says "this apple I.D has not yet been used on the i-tunes store" I click "review" follow the instructions and agree to the terms and condition's, enter my bank details but it declines every time? I've tried both my accounts and its declined both, this stops me from logging in so I can't download anything for free or buy anything, my sister had the option of skipping the bank details part when she created her apple I.D and just enters her's when buying something, why do I not have that option?? And why is it declining my bank details...please HELP!!!!!
The details I'm entering are correct, I choose visa as my card type, enter my card number, enter my expiry date and my last 3 digts on the reverse of the card, enter my address and zip code plus my home telephone number, click continue and it says "the payment method you have selected has been declined, please enter another payment method". I've lost count how many times I've tried, I've typed my details in slowly making sure I put them in properlly and it still declines it, I've even tried makeing a new apple I.D and when I get to the bank details part it declines it again so I am forced to press cancel and all details are not saved so its just like I'm hitting a brick wall, its ******* me off!!! I can't even download any of the free app's because to do so you must log in but when I do it says "this apple I.D has not yet been used in the i-tunes store" review my details and can't get past the bank details part. So doesn't log me in, I'm honestly out of ideas
-
I have a new macbook pro and want to transfer my Mail autofill from my old mac. Never used Time Machine or Migration Assistant -- looks complicated. Any easy way to do this?
caitlinfromcambridge wrote:
Thanks -- I would like to try this. I do not know how to reach hard drive from old mac to new. Can you help me with this?
There are two ways - you can boot your old Mac in Target Mode (reboot your Mac, and as soon as you hear the startup chime hold down the T key on the keyboard until you see the yellow/orange Firewire logo on screen). You can then use a FireWire cable to connect your new mac to your old one. The old Mac hard drive will appear on your new Mac as if it is an external hard drive.
Details on Target Disk Mode: http://support.apple.com/kb/ht1661
If you don't have a firewire cable but you do have a home network (i.e. both computers can access the Internet at the same time), you can share the hard drive on your old Mac and then connect to it on your new Mac.
Good article on sharing your hard drive: http://support.apple.com/kb/HT1549
Finally, if the above doesn't thrill you, you can hook an external drive to your old Mac, copy the mail folder over to it, then connect the external drive to your new Mac and copy it over. It's two steps, but if you don't have a firewire cable and aren't comfortable with sharing over a network it will work just as well - you just have to wait for the mail folder to copy twice instead of once.
If you get stuck post back! -
HT201250 how do i add external hard drive to my time machine back up
how do i add external hard drive to my time machine back up so that I may view the files independently on apple tv please?
To elaborate on above. I am looking to add about 300gig of photos on an external hard drive to TC.
Once I do this I believe I can then have itunes source its photos from TC without having them stored directly on my iMac?
Then I am assuming once I keep itunes on with home sharing I can stream these photos through Apple TV?
My inital problem is getting the photos onto TC in an individual folder not just a backup folder....is that possible or what would you suggest please? -
I had to reformat my OSX 10.5.8 and I can't restore my emails from my time machine backup from an external hard drive - only the latest (post backup) time machine back ups are available to restore. Please can any help? I can find the mail folder in my libraries, but the Restore Button is grayed out
OSX treats the reformatted drive as a different one; it's the same as replacing it, and the old one is no longer connected.
See #E3 in Time Machine - Troubleshooting to see and restore from the "old" drive.
And, you may not want to restore via the Finder; see the blue box in #15 of Time Machine - Frequently Asked Questions. -
I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard.
Hi Clarkett99,
To use an external hard drive for your iTunes library, see the steps in this article -
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751
iPhoto can be used in a similar way, follow the steps in this previous discussion -
how do I save photos and their albums...: Apple Support Communities
https://discussions.apple.com/thread/3744259
Thanks for using Apple Support Communities.
Best,
Brett L -
The disk drive in my iMac 8,1 has stopped working, so I now use an LG 8x Slim Portable that works. However, every time I use the LG drive, I lose contact with my Time Machine back-up drive that has to be deleted and reinstalled. Help!
It's not Logic that can't find them, it's your Komplete apps, though if you did exaclty as you say I can see no reason why they can't.
Do you know where the apps installed them in the first place? I chose a non-standard locarion for mine, but I'm sure it installs sounds to your documents folder/native instruments/name of app.
Go into the prefs of each app and choose the library location button on the library tab and point it to the relevant folder in documents/native instruments and see if that works
jake -
Can some one HELP me , I keep getting this error with my Time Machine Back up, "The backup disk image “/Volumes/JKPN Safe/JKPN IMAC.sparsebundle” is already in use.
See > http://pondini.org/TM/C12.html
-
Mo ipad 2 won't backup to icloud. I get a message "There was a problem completing the backup. Please try again later. I have tried multiple times over the last 24hrs but no luck. My iphone backs up fine on the same wireless network.
i have this issue to any solution yet?
-
i bought an eBook from iTunes. I can view/read it perfectly on my iPhone but when I try to open the eBook file on my iPad, I get the error message, "Cannot open book. This book is protected by an incompatible technology." Any ideas for me? thx
Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry. -
When I try to update an app in the App Store i get a message "There was an error in the App Store. Please try again later. (13)" I have tried many many times and keep getting the same message. How do I resolve?
First take the steps recommended in this support article. If there's no change, continue as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Cookies/com.apple.appstore.cookies
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Can anyone help? I have bought an iMac but when I try to sync it with my iPad it says I need to update the iPad to version 10.6.3 or later yet when I try to update the iPad it says it has the latest update which is 6.1.3 how can I fix this so I can sync the two?
Its not telling you to update your iPad, its telling you you need to download a recent version itunes on your computer.
Go here to download the newest version of iTunes.
http://www.apple.com/itunes/?cid=OAS-US-DOMAINS-itunes.com
Maybe you are looking for
-
ITunes 7 -error message when downloading
Hi Sorry if anybody else has raised this question, I currently have itunes 4 downloaded and am trying to download itunes 7, however i keep getting the following error from Apple support. "Service'IPod service' could not be stopped. verfiy that you ha
-
Logical standby database problem
i have setup logical standby database on my pc . Everything was working fine . Logs were applied. But i tried testing few things on standby and issued few commands on that. After that the logs were not applied. i tried to restart that also dint work.
-
Problem in installing Ultra Search
Hi all, We are facing problem while installing Ultra Search for Oracle 9i in Sun Solaris server. The Ultra Search documentation says that the middle tier component includes the following : 1. Ultra Search admininstration tool 2. Ultra Search Java que
-
Hi guys, I'm developing an ADF application in JDev 11.1.1.6.0. I have problem about using arrays in jsp page. I have an iterator that brings me data from UCM. I just want to take every documents seperately and use in a Jquery division by division. Ca
-
ALL_TAB_MODIFICATIONS.TIMESTAMP & Data in the table
I have Orace 10g I have a table which I want to see when it was last DMLed (insert, update or delete), I found a data dictionary view named all_tab_modifications, column timestamp supposed to have the last run statistics in my case it is 23-april-201