HT1414 Iphone 3G restarts right in the middle of restore so I keep getting unknown error message.
Hey everyone, I have an old school Iphone 3G, it restarts itself right in the middle of a restoration so I keep getting unknown error message. I don't know why but no matter what usb port I plug it into, the white bar underneat the Apple logo on the iphone will get right close to the end but then like I stated earlier the phone restarts randomly, so it won't let me restore the product because it keeps getting reset by itself.
please help me
Thanks for helping out, but I already tried these steps.
I even tried this on a iMac with similar results. The only difference was that the errorcode was called 2001 instead of 21.
Today I took the phone to www.iphoneambulancen.dk. A guy (in Aarhus, Denmark) that specializes in iPhone repairs. I figured, that given his occupation he'd seen most errorcdes. Two hours later, he called me back, and told me that he had replaced the battery.
So, it turns out that a broken battery can cause this behaviour.
But thanks again
Similar Messages
-
I backed up to my PC and attempted restore but I keep getting an error message that "iTunes could not restore the iPhone because not enough free space is available." I have a 32GB iPhone; only 13GB used!!! HELP! iCloud backup/restore did not work either! How can I resolve this problem to restore from back up.
If you're not a developer then you really should not have upgraded.
I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades. -
I just did the recent upgrade and now I keep getting an error message when I try to open a book on my Kindle app, I have deregistered the app and reloaded and the same thing happens, does anyone know how to fix?
You are seeing the message because the new AirPort Extreme has some specific System Requirements:
http://www.apple.com/airport-extreme/specs/
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
AirPort Utility 5.6.1 in Snow Leopard may or may not work correctly with the new Extreme for all functions. As long as things are working OK for now, you can probably leave them "as is" and wait for another Mavericks update to fix some issues before you "upgrade".
If you have an iPhone or iPad, you could use that to administer any settings changes on the new Extreme. -
I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks
If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.
-
I am unable to download iTunes on my second Windows 8 computer (64 bit). I got it fine on my first one and have used it quite a bit. After downloading the program and installing it on the second computer, I keep getting this error message: "Apple Mobile Device Failed to Start." This happens when when my IPhone 5c is connected via Wi-Fi and I have clicked on "Trust This Computer." (I have tried to install several times-- It gets hung up when it reaches"Starting Services.")
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
I can''t download any apps to my ITouch. I keep getting an error message that says "unknown erro occurred oXE8003FE."
See:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting -
Whenever I try to download this program, Adobe keeps closing and giving me an error message - I'm super frustrated and don't know what to do.
Not quite clear what the problem is, Abby.
When you say you "can't download the program", do you mean via the Creative Cloud Desktop?
What - exactly - do you mean by "Adobe keeps closing"? There's no program called just "Adobe".
What - exactly - does the error message say, and at what point is it generated? -
It started with "No Service" messages that would last for 20 minutes or more. And last night, after waiting for a while for my service to come back, I tried to turn off and then turn on my phone. Shutting down took about 2 minutes, a very long time it seemed. Powering up never happened -- it stayed stuck on the Apple logo screen. In attemting to restore, I keep getting the error message (-1). But I can't find any info about this message.
Can anybody help?Try putting it into recovery mode, the restore. See http://support.apple.com/kb/ht1808.
-
How do I delete the backup? Will I loose all my information?
Disable your firewall/security software.
-
updating my iphone just failed, right at the end. Now I can't get the picture showing me to plug in my iphone to itunes to disappear. Please help, as I can't use my phone, and it will not clear.
read
http://support.apple.com/kb/ht1808 -
i cant reset my iphone by itunes because in the middle of restoring it it tells me the iphone is with a passcode!!
You need to restore via recovery mode, follow the article below to do this:
iOS: Unable to update or restore -
Am trying to update to 5.0 from 4.2.1 and keep getting an error message "There was a problem downloading for iphone. The network timed out. What do I do ?
This is asked and answered many times each day. The forum search bar is on the right side of this page.
Disable your firewall/security software and try again. -
When trying to download the new iPhone version, I keep getting an error message that my network connection has timed out. Any ideas how to fix this?
This is asked and answered many time each day. The forum search bar is on the right side of this page.
Disable your firewall/security software and try again. -
Hi- I keep getting an error message show up when I sync my iPhone to my Mac Book Pro. the message is that I can't copy to the Macintosh disc because I don' have enough access privileges. Then when I click ok my phone gets stuck syncing. any thoughts?
Sounds like a possible permissions issue, try repairing the permissions using Disk Utility.
You can open Disk Utility several ways.
1. Use the Spotlight in the Upper Right corner of the screen and search for it, then click it to open it.
2. Open a new finder window (File> New Window)
- Applications>Utilities>Disk Utility
3. Click on the Finder
- Click 'Go' in the menu bar across the top of the screen.
- Click Utilities, then double click on Disk Utility.
Once Disk Utility is open there should be a column on the left side, the name of your hard drive should be listed there.
(By Default it is named Mac HD or Macintosh HD)
Click on it to highlight it.
There should then be a few buttons you can click
- Verify Disk Permissions
- Repair Disk Permissions
- Verify Disk
- Repair Disk
Click Repair Disk Permissions -
I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks
sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone.
Maybe you are looking for
-
Multi-Thread application and common data
I try to make a multi-Thread application. All the Threads will update some common data. How could I access the variable �VALUE� with the Thread in the following code: public class Demo { private static long VALUE; public Demo(long SvId) { VALUE = 0;
-
Problems viewing Adobe Garamond Pro font
I am using InDesign to do a document. I has Adobe Garamond Pro font. I save the file fine and turn it into a PDF. The file is read fine with Adobe Reader, no errors. My client saves the file and makes some small edits to the text using Adobe Acrobat.
-
Dears: I have one question which is can I to stop and start service on windows 2003, such as Windows Audio service If yes please provide me with how... Thanks and best regards.
-
Thread 1 cannot allocate new log, sequence 1558 Checkpoint not complete
hi, i m working on oracle 10g rac database on aix machine . i m getting this error on peck time Thread 1 cannot allocate new log, sequence 1558 Checkpoint not complete i read lots of documents and they asked to increase size of redo file or add more
-
When I mirror my iPad to my TV, the screen is not "filled" It appears to be in "box" setting(4:3)...why is that?