HT1420 I am trying to sync my iPhone to my computer with a new Apple ID that Ive just created because the original account has been applied on too many computers. iTunes is not allowing me to transfer my purchases with my new account. Help!!

I am trying to synch my iPhone with my computer, and new Apple ID. My iPhone is synced with another computer, but i have changed the Apple ID on my phone and authorized it on my computer. However, i can not transfer my purchases on to my new account. I have updated my phone, authorized the account on both my phone and my computer. And i do not wish to wipe my phone clean, because there is but one song on this new account. How do i transfer the music on my new account?

All content bought/downloaded from iTunes is tied to the account that downloaded it and it can't be transferred to a different account - so you will need to authorise your old account on that computer if you want to transfer its purchases over.
Authorising/deauthorising : http://support.apple.com/kb/HT1420
Syncing with a new computer : https://discussions.apple.com/docs/DOC-3141

Similar Messages

  • HT1430 my daughter's ipod has been disabled after too many wrong password attempts. The ipod was not synced to a computer. How can we get it started?

    My daughter's ipod touch has been disabled after too many wrong password attempts.
    The ipod was never synced to the computer so can't connect to itunes.
    How else can we enable the ipod touch again?

    Restore, if iTunes will let you.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  In your case, choose any computer with iTunes software.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • The iPad says disabled connect to iTunes. When connected it says please enter passcode. There is no places for me to enter a passcode. This has been like this for many DAYS...not hours. HELP!

    The iPad says disabled connect to iTunes. When connected to iTunes it says please enter passcode. There is no places for me to enter a passcode. This has been like this for many DAYS...not hours. HELP!

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • [svn:fx-trunk] 11652: The damageHandler needs to invalidateSize because the damage could have been caused by a programmatic change which would not have gone thru the EditManager .

    Revision: 11652
    Author:   [email protected]
    Date:     2009-11-11 06:06:14 -0800 (Wed, 11 Nov 2009)
    Log Message:
    The damageHandler needs to invalidateSize because the damage could have been caused by a programmatic change which would not have gone thru the EditManager.  Need to make sure invalidating the size and remeasuring doesn't cause another damage event to avoid an infinite loop.
    QE notes:
    Doc notes:
    Bugs: SDK-23052
    Reviewer: Gordon
    Tests run: checkintests, TextArea, TextInput, NumericStepper
    Is noteworthy for integration: no
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-23052
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichEditableText.as

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • Itunes will not allow me to transfer music to my iphone, how do I fix this?

    Got a new computer, authorized it with my account, downloaded music (from a 3rd party website not itunes), but it will not allow me to transfer music to my iphone. What else do I need to do? Help!

    What have you tried?
    What happened?
    Error message?
    What did it say?
    Any info at all?
    In  what format is the music?

  • ITunes will not allow me to transfer music manually to my iPhone

    Hello,
    Since I got my iPhone 4S in March, I have been manually adding music to my phone by connecting the phone, and dragging music to my phone. Recently, I had to reformat my PC and when I reinstalled iTunes, I try to click and drag music but it gives me the small red x while i hover over the iphone in the itunes window.
    I don't really know what I should do to try and fix this issue. I have tried to authorizde/deauthorize the computer. In my account on the iTunes store, it says only 1 computer is able to play purchased content or something like that. Can this be resolved other than having to erase the phones content and startng over?
    Thanks.

    The following is from Apple article:
    Using iPhone, iPad, or iPod with multiple computers
    iPod shuffle and iPhone are intended for use with a single computer. You cannot load music from multiple computers or iTunes libraries onto iPod shuffle and iPhone like you can with other devices.
    Sync is only oneway, from PC to your device. Unless you have the music on your PC, iTunes is going to wipe out what you have on your device if you are syncing to a new library.
    You can only transfer Purchased music over to Itunes on your PC.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/HT1848
    As for you own music, you may have to use a third party software to copy back to your iTunes library. A good Free one is called Sharepod which you can download from Download.com here:
    http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2

  • Itunes will not allow me to add newly purchased songs to my ipod classic, i have no problems with adding free podcasts but anything that i have purchasedd when i drag it over to ipod the little red circle with line through it stops me. what has gone wrong

    i just started using this netbook for itunes at first it wouldnt let me purchase anything just free podcasts etc but i got that sorted it was just a matter of resetting the security questions because i hadnt made a purchased from this computer before. now it is allowing me to purchase no problem but itunes will not let me add my purchases to my ipod classic??? i can add all the free podcasts i want but anything that has been purchased is blocked from being added.my ipod show up in itunes but only as a summary thing i cant actually look through my music on the ipod in itunes on this computer

    You might want to check your process for moving your iTunes music against this: http://support.apple.com/kb/HT4527.

  • Trying to sync my iphone music to computer, unable to do so, it is stating i need to authorize my computer

    my computer is a new computer. on other occasions i been able to sync my music without a problem from Iphone to computer. today attempted to do the same and i was unable to do so. It gives me a message that my music is in cloud which i don't understand what that is and than that i need to authorize my computer which I don't know how to do or where to go for it!

    Hello elsa78,
    The article linked below details how to authorize your computer.
    Authorize or deauthorize your Mac or PC
    http://support.apple.com/kb/HT1420
    Cheers,
    Allen

  • Cannot sync multiple iphones on 1 computer with multiple accounts

    I have had no problems until recently.  I have 2 iphones that I sync with two different users on 1 Windows 7 PC.
    I was always able to sync the respective iPhone with the iTunes on each individual account without any problem.  Now, it freezes up on 1 of the accounts, but works on the other.
    I have uninstalled and reinstalled iTunes.  One sympton I noticed while troubleshooting is that it seems like iTunes is getting corrupted because even without syncing, if I select Edit/Preferences iTunes starts to hang.
    .  Here is the sequence of events after uninstalling / reinstalling the last time:
    -  After verifying the install, I made sure that on both user accounts, iTunes was operating normally.  I did this by starting it up and playing a few songs and going to the Preferences, which it did quickly on both accounts
    -  On account 1, I synced iPhone 1 without any problems.  Exited iTunes.  Repeated a couple of times
    -  On account 2, verified that iTunes was working properly again
    -  Attached iPhone 2 on account 2 and it hung. Also gave me this error:  "iTunes was unable to load data class information from sync services"
    -  Now whenever I try and run iTunes on account 2, it plays songs but as soon as I try and access Preferences it hangs
    -  Running iTunes on account 1 and syncing account 1 is still no issue
    This is very frustrating because I have not been able to sync iPhone 2 for a couple of weeks now.
    Thanks.

    Any help?  If I unistall and reinstall iTunes, which ever account / phone I sync to first works, but the other account / phone will not work.
    Is there anyone else out there who is successfully syncing 2 phones on 2 accounts on one computer?  Why isn't this working anymore - it worked fine for over a year until now?

  • Every time I try to sync my phone to my computer and dowload something on to it it just automatically cancels the sync

    Everytime I try to synce my phone to by computer it with backup the information but them just says cancelling sync

    Hi,
    Try restoring as a new device. Help here.
    Carolyn 

  • Need help to sync two iphones to one computer with one user. Want the same library but both phones have different contact lists.

    There are two iphones in the family. We want to share the same music but separate pictures, contacts and apps. Do I have to create user accounts on the computer and different libraries?

    check out method one from this support article -> How to use multiple iPods, iPads, or iPhones with one computer

  • How do i get my contacts back after syncing my iphone to a computer with multiple iphones on it and it put all the wrong things on it

    i did this and all my contacts are all gone

    and different ones from another iphone are on there now

  • I just updated my itunes to 10.4.1 and i then tried to update my iphone 4 to ios 4.3 but it says that 4.2.10 is the current version. can anyone help?

    okay, so i just updated itunes to 10.4.1 and noticed my iphone was still 4.2.10
    but when i click update it says 4.2.10 is the current version....i want to update it to 4.3
    can anyone help?

    If you have a Verizon phone, 4.2.10 IS the latest update.  A cursory search of this forum would likely have gotten you the answer much faster.

  • I tried to update firefox, then the update crashed. I cannot open firefox any more because the "firefox.exe" has been "changed or removed". How do I fix this?

    I was trying to update firefox to open a pdf file from a website that said on the top of the page that my plugins are out of date.

    Hi,
    Run an antivirus program first. It's very possible you just got stung.
    If that didn't fix it, reinstall firefox.
    Hope that helps.
    Ian

  • I purchased a lightroom 4 on disc several years ago. In 2013 I again purchased the upgrade to Lightroom 5. Later I was sent a free upgrade of lightroom 5. I have all the activation codes for those products. Unfortunately the original disc has been misplac

    I purchased a lightroom 4 on disc several years ago. In 2013 I purchased an upgrade to lightroom 5 via a download. I have all the activation codes. I uninstalled lightroom from my old laptop and now want to download it to my new laptop using windows 8.1.
    Where do I go to download already purchased and paid for copies of lightroom 5. I can put the verification codes when payment is requewsted. HELP!!!

    Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

Maybe you are looking for

  • How do I buy a ringback tone that isn't a "top ringback tone?"

    I found a RBT that I like, it's Marvin Sapp's "The Best in Me- Can I get a witness." It's not the version that is under the "top rbt's" and I can't find a purchase or add to cart button..well, a "buy" button- only if I want it with the ringtone, and

  • RFC Webservice in Service Registry?

    Hi, Is it possible to publish, a webservice generated out of an RFC in any of the R/3 system or a webservice from any third party application within our landscape, to the Service registry available for that landscape? If Yes, how and if No then Why?

  • Bg color

    Can I change the background color of a browser window opened by a behavior?  

  • CR XI R2 "Database Login Failed" Recycled application pool and now it works

    Hello, I have a web application using CR XI R2 that has several reports which are pushed a dataset.  These reports have been runing fine until today when I received an error stating "Database login failed."  "Object reference not set to an instance o

  • CFquery to javaScript Array to Listbox

    Help! Here's what I've got so far: <html xmlns=" http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <cfquery datasource="ERMRiskMgmt" name="DelegateList"> SELECT CoordFirst + ' ' + CoordLa