HT1430 mail is not behaving the way it should after updating to ios 6.1.2

after updating to ios6.1.2 on Saturday March 9, 2013 the mail is not operating the way it should. What can i do to try and fix it?

Nobody here would know since you didn't explain in detail why it's not operating the way it should.

Similar Messages

I have an ipad mini with ios 7.1.1 it lags a lot and the lower part of the screen is shaky after updating to ios 7.1.1

i have an ipad mini with ios 7.1.1 it lags a lot and the lower part of the screen is shaky after updating to ios 7.1.1

Thank you for the advice Randy. Very helpful of you to jump in with a post that adds so much value for the OP.
A bit of advice for you as a new user. Please refrain from making assumptions and using hyperbole. Both get in the way of providing useful support. Not "everyone" has tried the basics, let alone know what they are. That's why they're here. These first steps in troubleshooting often fix the issue being asked. If this thread doesn't answer your question, move on and find one that does. Feel free to skip the thousands that advise a reset.

My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1and it was not jillbreak or hacked to unlock. I need help, what can I do?

My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1
my phone was not jillbreak or hacked to unlock. i need help, what can I do?

Did you do the Reset Network Settings as I described above?
There is no way to go back. You can try reseating your nanoSIM or replacing it. Or call your cell provider and have them check the provisioning on your phone.
Or Restore your iPhone from your backup in iTunes.

My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1 i need help, what can I do?

My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !!
It was working fine on ios 8.1.1 i need help, what can I do?

I have this problem too - and it is on a BRAND new iPhone 6 - I have definitively tracked the issue to the moment I upgraded to iOS 8.1.2 - and am beyond frustrated. No fix to tell you about, sorry…but you can read my post here if you are into the whole "misery loves company" thing: iOS 8.1.2 Cellular data problem (Definitive - maybe)

Why does my camera connection kit not work with my ipad 1 after updating on ios 5?

Why does my camera connection kit not work with my ipad 1 after updating on ios 5? What can I do to make it work again?

It should. It will only respond if there's something on the card for it to respond to, so do you have pics on the card?
And if it's messing up; try giving the iPad a restart. Hold down the sleep and home keys, past when you see hte red power down slider and until you see the silver apple. Let it reboot and try again. That can clear up any glitches on the device itself.

Ps 3d and filters and save for web are not working the way they should

At work we just put cs6 on a w7 machine running 64 bit which has more than that required mem and or ram to run cs6 - unfortunately I have to use a windows based machine at work (cheapskates). Anyways. I see the 3d menus and the filter menu in PS but they aren't funtional. The filter menu drop down is there but Liquify is the only one that shows up the rest are gray. The option to choose 3d is also there but they are not functional (grayed out) - I took a look at some online tutorials on using the 3d effect in PS CS6 and Ive gone through it a few times and it still won't work for me. Also, in illustrator when I save for web - when I adjust the pixel dimensions and move the mouse over and click on the image that I am saving for web nothing happens and I'm completely boggled about how to get the image size to change in the save for web pane. Typically I am used to being able to input the the number into the pixel dimenion field and click on the image and the image resizes (on a mac you can either click on the image or hit return and the image will resize in front of your eyes!). I am unable to get this to work the way I am used to, this happens for me in both ill5 and ill6 on this piece of crap windows machine. Maybe I just need to reinstall? Maybe adobe has changed the way this works? Maybe a sledge hammer into this windows machine would solve all my problems!? IDK. someone help... help me... pleeeeaaaaaaaaaaasssseeeee

unfortunately I have to use a windows based machine at work (cheapskates).
This gets a "stupid comment of the day" medal. Seriously. These days Macs are just as convoluted and effed up as Windows was a few years ago - nice as long as everything works, but god forbid you have a problem. So by all means, update your graphics driver and be glad that you actually have that choice rather than having to wait half a year for Apple to fix it...
Mylenium

How do I make download manager behave the way it should?

== Issue
==
I have another kind of problem with Firefox
== Description
==
When downloading a filetype that is set to "Always ask", Download Manager (DM) offers two radio-buttons and a checkbox, for "open with", "save to disk" and "always do thls", respectively.
My question regards the first. The option now reads "Open with ....[[browse]".
It used to read, and should still read, "Open with ,,, [[TheRightApplicationForThisFiletype]"
If I do click [[Browse], FF offers a list of helper applications, most of which are wildly wrong and could not handle the filetype -- such as Acrobat, or FF itself. But when I do pick the correct application from this list, now DM momentarily and finally looks like it should have looked in the first place:
"Open with ... [[MSWordWhacker]"
and upon clicking "OK", opens the file with WordWhacker.
The next time, though, we're back to [[Browse]. I've browsed enough! I feel like a sheep!
Everybody starts telling me about the Applications menu and setting it to "Always open with WordWhacker", and that's not the right answer. THAT just automatically opens the file with WordWhacker instead of offering me the options to either open or save the file. I need the "Save to disk" option every time.
In the [[browse] list of helper applications WordWhacker isn't even the first option. The first option is FireFox, and FF can't handle WordWhacker files. Neither can any of the other choices except MS WordWhacker.
My windows file associations are correct, MSWW is the only application associated with the filetype. I've tried uninstallling and reinstalling the app, no change.
One suggestion from IRC was that my profile was corrupt, so I deleted the whole folder and had FF recreate me. No difference. Downgraded to 3.5 and back to 3.6, also no difference.
The IRC guys are out of ideas. (Thanks for trying, though!)
How do I get DM to stop offering me
"Open with ...[[Browse]"
and start offering me
"Open with ... [[WordWhacker]
instead, when I click on urls for wordwhacker files?
<br/> <br/>''(Edited by Moderator: fixed brackets - c)''<br/> <br/>
== This happened
==
Every time Firefox opened
== I reinstalled WinXP
==
== Troubleshooting information
==
Not applicable
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
== Plugins installed
==
*-Office Plugin for Netscape Navigator
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*6.0.12.46
*1.9.0042.0
*BitCometAgent v1.07 for Firefox
*2.0.0048.0
*NPTURNMED
*Default Plug-in
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Foxit Reader Plug-In For Firefox and Netscape
*Shockwave Flash 10.0 r45
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Version 1.0.5, copyright 1996-2010 The VideoLAN Teamhttp://www.videolan.org/
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Adobe Acrobat Plug-In Version 5.00 for Netscape
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object

Well, there's no help here, it seems. There is a work-around in the form of an add-on called Open Download
This adds another radio button to the dialogue, and it's labeled,
"Open with default Win32 Application". It works and does exactly that -- opens the file with the application that Windows uses for that filetype.
It doesn't, notice, say what that application IS, so you must know that yourself. And naturally, if something you install plays "swipe the file association" as so many applications do, this will change which application gets used without notice to you.
Clearly, it would be better if DM worked as outlined, and told you what application it was going to use. But this workaround solves the basic problem.

GTX 970 not working the way it should.

Hello, I bought a msi gtx 970 yesterday but it is not working good. I can not even play league of legends without stuttering. When I play on maximum settings it says 60 fps, but in fact it is stuttering. The memory clock keeps shooting up to 3506 and than goes down again, this keeps happening. When I had call of duty advanced warfare open for 10 minutes, not even being in a game, the gpu usage is 98% and the memory use is extremely high, while nothing is happening on the screen, just some menus.
All drivers are downloaded and previous drivers from my old video card are removed.
These are my pc specs.
i5 760 @ 2,8 GHz
msi gtx 970
8gb DDR3 RAM
Asustek V-P7H55E motherboard
Windows 8.1 64 bit
Hope someone can help me out.

Quote from: Nichrome on 09-February-15, 22:57:36
My current 780Ti is getting bottleneck by the CPU I have.. so even worse would be if I'd have 970 or 980..
That's because yours is the T version. It's not even nearly as good as the normal 4670 or K version.
Actually, it the lowest of the versions. Even S version would be better.
With normal 4670 and 4670K you wouldn't be getting bottleneck.
Quote from: lucas-1996 on 09-February-15, 22:07:05
I have one more question. I cant really decide if I shall get the i5-4690k for my new motherboard or the i7-4790k. Is the i7 worth the 100 euro extra? I dont do things like photoshop, maybe a bit of streaming though.
What kind of cooling you have currently, or are you using stock cooler?
If you don't have sufficient cooler or are running stock cooler, you will need to invest on better cooling.
In which case, get the i5 4670K and buy a new, better cooler with that 100$.
I would recommend at least Hydro H80i if you have a free 120mm fan slot in the case.
If not, get the BeQuiet! Dark Rock Pro 3 or similar.

HT4623 After updating to IOS 7.0.4 for my IPhone 5 I noticed that the pictures I take are not uploaded to my PC in photo stream any longer. I have not changed any of my settings after updating from IOS 7.0.3. What could be wrong?

Since updating to IOS 7.0.4 My pictures no longer automatically load to my PC's photo stream folder. I have not changed any settings after upgrading from IOS 7.0.3. What could be the problem?
Thanks.

mouse1832 wrote:
I've been to apple to speak to one of the so called genius' and even their baffled by the problem
and they told you , "Oh well" and you left without getting it resolved?

Resume: Could not stat the resume device file After Update

Peace!
I -Syu and rebooted to this error:
resume:
Could not stat the resume device file '/dev/disk/by-label/hda1'
Please type in the full path name to try again
or press Enter to boot the system:
Figuring it must be something weird happening to the suspend procedure, I wanted to skip it and boot normally. So I pressed Enter... to no avail.
Waiting for devices to settle .... done.
Root device ' /dev/disk/by-label/hda2' doesn't exist, attempting to create it.
ERROR: Failed to parse block device name for '/dev/disk/by-label/hda2'
ERROR: Unable to create/detect root device '/dev/disk/by-label/hda2'
Dropping to a recovery shell... type 'exit to reboot
NOTE: klibc contains no 'ls' binary, use 'echo *' instead
If the device '/dev/disk/by-label/hda2' gets created while you are here,
try adding 'rootdelay=8' or higher to the kernel command-line
ramfs$
Now, I'm starting to think its not just due to the suspend procedure and maybe something more. Afterall, I did not suspend, I rebooted. I remember updating the kernel, klibc and perhaps udev.
I wanted to try adding the rootdelay thing but the grub menu wouldn't show up.
Sobs..
I really need to research on failsafe fallback procedures... some kind of ultimate undo feature.
Last edited by onguarde (2009-01-21 08:39:40)

http://bbs.archlinux.org/viewtopic.php? … 58#p484758
It seems someone else has similar problems...

A simple fix to the "No Content" error after updating to iOS 4.2.1.

I had the same problem that others are reporting after updating an iPhone to iOS 4.2.1 where all of my media disappeared. However I don't currently have access to my PC to sync with iTunes but have posted a really simple fix that worked for me here:
http://vextasy.wordpress.com/2010/11/30/a-very-simple-solution-to-the-iphoneipod -4-2-1-update-no-content-problem/
The advantage of this fix is that it doesn't need you to use iTunes which was important for me as I am currently away from my PC. I fixed my iPhone this way and I suspect the same would work on an iPod Touch or iPad.

You can only sync to one iTunes library but you can manage music and videos among different computer/libraries.
It appears that you are trying to sync with a different library.
- If you want to make the Mac you syncing computer:
--- Connect the iPod to the computer and make a backup by:
iOS: How to back up
--- Restore the iPod from that backup. Note that synced media like apps and music are not in included in the backup.

ITunes store will not open on my iPhone 4s after updated tin IOS 7

I downloaded the newest version of iTunes to my computer after updating my phone to IOS 7. I then synced my phone and I can no longer connect to the iTUnes store from my phone. I was able to purchase music while listening to iTunes radio but still could not connect to the store. When I try to open iTunes using the app it acts like it is going to load and then returns me to the home screen. I have tried to force close all the apps and then rebooted the phone and tried to use the iTunes app...still no luck. Also, any new songs I have purchased since the update have the wrong album artwork associated with them. For example: Scotty McCreary album has Carrie Underwood as the album artwork.

Other users have found this useful:
1.- Close the iTunes app by pressing the Home button twice, and swiping them up.
2.- Then go to Settings > Safari > Clear Cookies and Data
3.- Sign out and in using Settings > iTunes & App Store
Hope that helps.

How to fix the lag in keyboard after updating to ios 7.1

My iPhone was recently update to iOS 7.1 as of the release date. As soon as it was done updating I unlocked my phone and the keyboard now and always lags and is not responsive unless you wait about a minute. I restored my iPhone and then restored it from backup and the issue continued. Can someone please help me solve this issue before the next bug update. Because I cannot text or type without waiting for my phone to respond.

I have read that going to settings, general, reset, reset keyboard dictionary has helped. In the past, it was found that going to settings, iCloud, turn off documents and data helped too.

Ownership not behaving the way I expect

I have 'migrated' from one User Account to another on the same computer. I had a little trouble with iTunes to start with (can't remember the details now but there was an authorisation issue for files purchased in the iTunes store ...)
The problem I currently have is that lots of folders and files list the Owner as the previous User Account and when I try to change this via the Info box for the folder in question, it doesn't allow me to 'Apply to enclosed items...' - the button at the bottom of the panel is greyed out. This means I can't edit details related to the songs in iTunes without changing the individual file permissions.
Both User Accounts have Administrator privileges.
As I say, I'm mostly noticing this in iTunes but I think it may also be effecting preferences for a few Applications.

Hi Des, assuming these aren't System Folders but User's folders, then Might try BatchMod, it's much better/easier than the Finder for recursive Permission changes...
http://www.macupdate.com/info.php/id/6440
This version says Leopard but worked fine on Tiger for me, I can give a link to an older version if need be.

IMessage across multiple devices - not working the way it should?

OK, here's the problem: I'm seeing conversations in iMessage on my iPad, but yet I'm not seeing any of those conversations on my iPod Touch.
My guess this problem exists is because I've used a different iTunes account on my iPod Touch to experiment with iMessage between my iPod Touch and iPad. I did this before I signed in with the same iTunes account as on my iPad (my primary iTunes account), but then again, I don't event know what the problem is.

Hi frankct,
iMessage do work as advertise for an AppleID; i.e. all your devices will show in sync all your messages.
For this to work like this, you obviously need to login into the same account for all your devices. Go, in the settings of your iPod Touch in the Message section. There, at the bottom, tap "receive at" and you will see to which account iMessage is linked. Most probably in your case, your iPad and your iPod aren't loged into the same account.
I haven't try it you can independently log iMessage with an AppleID different than the one use for your purchase but you could try it.
If I may suggest; if you own your these two devices, you should chose one of your AppleID and use it only for now on. If you don't, you nightmare will continue while you may mix other sync iCloud info and having purchased on two accounts.
Even if you only purchase from account A from now on, you simply have to keep your devices also authorized to play your content purchased brom account B.

HT1430 mail is not behaving the way it should after updating to ios 6.1.2

Similar Messages

Maybe you are looking for