HT1430 My iPhone is completely frozen. I did a hard reset about 10 times and finally the iTunes logo appeared with a plug-in showing. I can't get it to anything else. Help?
MY iPhone is completely frozen. I did a hardest and finally after 10 times it came up with the iTunes logo with a plug-in sign. It is still frozen.
WHat should I do.
MErmaid
You're not alone. I am having similar problems with my Ipod 5th gen 30gb.
When I connect it to my laptop (Vista - basic) it is not recognised by itunes. Itunes simply locks up.
So far I have tried the following to no avail:
Checked my pc's device manager - it recognises the device and says it is functioning properly.
Checked the drivers to make sure they are upt to date.
Uninstalled & reinstalled a previous version of itunes (as it worked fine before the latest release).
Reinstalled the latest itunes.
Reset the ipod.
Put the ipod into disk mode and reconnected to itunes.
Have tried to use the windows tool to scan and fix any bad sectors but it fails to complete a scan without locking that up as well.
Placed into disk mode when fully charged and then allowed the battery to drain completely. Then reconnected ipod (in disk mode)and it still is not recognised and locks up itunes.
At this point I dont really want to part with another $300 odd dollars for a new one.
Similar Messages
-
My iphone wont turn on, it keeps loading for the longest time and then the apple logo appears for about 10 seconds and then glitches to the color blue and repeats.What do i do?
Hi there e12345,
You may find the troubleshooting steps in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W. -
after I upgrad my iphon 4s, iTunes logo appears with a picture of USB cord when I turn on the power.please please help
I had this same problem when I tried to update. It locked up during the update. Your phone is in recovery mode. The only way I could restore my phone was to connect to a different computer and ask it to restore my phone. It worked and thanks to the fact that I had backed everything up to the iCloud before updating, everything is back to normal. I won't be updating to IOS 6.2.1 again. I had also updated iTunes and now whenever it starts it gives me an error message -42110 and doesn't recognize my Iphone when it's connected. Hopefully, Apple will fix this soon. Good luck.
-
how can i open my iphone because when i try to restore it from my back up all the files it didn't open anymore & always my iphone have a problem that it automatically shut down then the itunes logo appear then i need it to connect to itunes then restore to enable to open it..what should i do?i cannot bring it to the smart center because i lost my receipt..is there any chance to recover it?thank you so much..i already update my operating system to ios 6.1.3 but when i recover my back up the operating system was ios 6.1.2..
Your phone is in recovery mode. Did you plug it to the computer running itunes? What happend?
-
"I did fresh restore, reset all setting and reboot the issue still there. I hope Apple don't forget us to solve this issue soon
Oh I've found it meanwhile! The is a 2nd post! So never mind this one! I think lawyerhusain understood he has to let Apple know, if he wants them to know and the technical thing will continue with the 2nd post!
-
I restored my iphone but now it will not power on fully. The Itunes plugin appears. I plug it in and restore as requested but the phone never restarts like it says it will. I have done this several times now but nothing. Suggestions?
Sounds like time to take it back to Apple for repair.
Allan -
After updating my Iphone 4s to os 7.1.1 from 7.1 over the air, my phone went into recovery mode. Yet when I try to restore it with Itunes on my windows 7 laptop it says the network connection has been reset. Make sure your network settings are correct and your network is active, or try again later. My phone has the itunes logo and charger symbol on it, as well as an arrow pointing at the Itunes logo. After holding the sleep button down or even doing the hard reset the same screen comes up on my phone regardless of whether it is plugged in or not to my computer. I have turned my computer off and on again. It is plugged in and charging as it's battery life is very short. I also reset my modem and the same error message pops up. The only option on my computer when my phone is plugged in is to restore it. My firewall also allows Itunes through it. I have literally tried everything I know being someone who knows very little about technology. I also do not want to hear about how the update worked for other people. My phone has been in recovery mode for 5 hours at least now so it will just make me more frustrated if a bunch of people post about how the update worked for them.
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
I just got a refurbished iPod 5th generation 32gb. This morning I went to turn it on and it didn't do anything and kept the black screen. I tryed to turn it on but it didn't do anything. The day before it had looked weird, as in I was downloading an app and it powered down, the when I tryed to turn it back on it got red and green lines on it. Should I send my ipod in to Apple so they can fix it or can I do this myself?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. Or send it to Apple
Service Answer Center - iPod
Apple Retail Store - Genius Bar -
its my first ipod touch and i crack a bit of my screen because its my first can i get free screen? HELP!
nikodafrommelbouren wrote:
its my first ipod touch and i crack a bit of my screen because its my first can i get free screen? HELP!
Of course not.
Like any warranty it does not cover damage. You would have to pay like everyone else. -
I tried to update my iPod 4th generation while it was charging and when I came back to check on it the screen was red and it wouldnt go off, and my ipod wasnt charging like it was supposed to. I found out how to get the color of the screen off but my ipod always has the low battery thing and when I charge it sometimes the screen turns blue or the apple logo comes up bright and then it gets dim and stays there. My ipod wont turn on, and I really want it to work again. Help me please! Also, I noticed my ipod battery hasnt been lasting long as it should efore this happened.
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Please help!!!
I would say try to turn it off and turn it back on. Sounds like something bad happened during the upgrade. Bring it in to the itunes store and they can plug it in to their computers.
-
Mac Pro 3,1 - did my hard drive die? And what should I replace it with?
Hi,
I inherited my late husband's 2008 Mac Pro (3,1 model) which had 2 x 500GB hard drives in it and 6GB of RAM. I filled the remaining hard drive bays with 1TB drives (I take a lot of video so needed the extra space). The boot drive was partitioned 50/50 in Boot Camp. I've upgraded the RAM to 10GB and I am currently running Lion.
Today, while doing something as innocuous as scrolling down a web page, the bottom half of my screen went black and the top half began flashing wildly. When it stopped after several seconds, the mouse would not respond and I could not click on anything. If flashed a bit more, and then I had mouse control back but could not click on anything - web links, applications, finder. After waiting patiently but getting nowhere, I powered the machine down manually, and when I re-started it, it failed to boot. The chime sounded, the apple appeared, and the little revolving wheel, but at the point where the screen would normally go blue then display the desktop, it just went white. The fans spin, but otherwise it's very silent.
I tested with a second display, got the same issue. I tried booting to recovery mode but it went back to the white screen. I could start in target mode, and there were no issues with flickering screen, so I don't think it's the graphics card. Then I tried browsing to the hard drive over the network, but it wasn't showing on the PC network page, nor could I connect to it via the home theater system, which I can normally do as the streaming app launches on start-up. I am assuming this means the drive has failed? It's the original, and we bought the machine when they were new to the market, so is a good 5 years old. It contains not only the boot drive but my documents, photos, websites, selected videos, all of which are backed up on the Time Capsule, and I was in the process of uploading to cloud backup as well (although not very far along, due to data cap and slow international upload speeds). I had no warning it was about to do this, but then I guess sometimes you don't!
Assuming I need to replace the drive, would it be worth replacing it with an OWC Mercury Electra 480GB SSD in an Icy Dock sled? Or would that be overkill for such an old machine? Would getting a standard 7200 WD Caviar HDD or similar give me enough of a speed boost? Obviously I am rather enamoured with the idea of a blazing fast SSD but I'd have to import it (not available locally) so I don't want to shell out all that money unless it's really going to make a massive difference.
Is there anything else I would need to know about using an SSD over a HDD? I assume I would fire it up the normal way - install it, boot from my Snow Leopard install disc (I downloaded Lion from the App Store) format it, clean install SL, then re-update to Lion, then restore my Time Machine backup? Am I likely to experience any weird issues due to it being an SSD? I see talk online of firmware problems and something called TRIM that I don't know anything about. If it's most likely that I can install it and rock on as normal, then I'm pretty keen, but if there's a reasonable probability of it being temperamental, I probably wouldn't be willing to deal with that (and therefore go the HDD route instead). Therefore I am very keen to hear people's opinions and experiences.
Sorry for the terribly long ramble. The more I have researched this, the more questions it raises! All advice gratefully accepted. Thanks!more than likely it is your video card. If it is ATI 2600XT, tell it bye-bye. The card is barely used at all in TDM or Safe Boot Mode. The 2600 and Lion and the issues with that card, even if it seems okay, is not.
Depending on Windows OS as to how it mounts and sees your Lion HFSX (there is a nice HFSX driver from Paragon, and an NTFS driver for Lion too)
480GB SSD is overkill for any system unless you are pushing CS6 2-3GB images and then for scratch. All you need for a boot drive is about 100GB.
If you have an SSD now, then 1) you need to do a full image backup and restore (regularly as maintenance), and 2) TRIM Enabler
Save Lion and you can always do a clean Lion install w/o going back to SL - but you might want to keep SL (dual boot) and handy if you run into anything you still need that required PowerPC/Rosetta
FBDIMM RAM dies, Amazon has $32 kits of 4GB. And having all 8 DIMM slots filled improves things. If you need or want to and feel 16GB isn't overkill.
SSD and issues are always possible. you should not just go along. not without a clone image. And you should have another drive w/ TRIM Enabler so that you can do a repair and "trim" what is needed.
Clone a system with CCC regularly. Bootable. And can also be used by Setup Assistant.
Install Lion over a heavily used SL system and there are likely remnants of old things that get in the way and left in there and not removed. -
My daughter's ipod touch has been disabled after too many wrong password attempts.
The ipod was never synced to the computer so can't connect to itunes.
How else can we enable the ipod touch again?Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. In your case, choose any computer with iTunes software. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
Iphone 5S is stuck with a battery icon and then the apple logo
HELP ME!!!!!!!!!!! My iphone 5s is really doing something strange. when I plug it in I get a quick battery icon with four vertical red lines and then the apple logo appears for about 3 seconds and then disappears. when I plug it into ITunes it tells me that the phone is in recovery mode and will have to be restored and when I try to restore it gives me an error and wont work. I have tried everything. please help me.
And if you check the link I posted, you'll find information on troubleshooting:
Check your USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
To narrow down the issue, you can also change up your hardware:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
If necessary, resolve any further issues with the USB connection, then with your security software.
If you're still seeing the error message, check for hardware issues by following the next section. -
I did a hard reset on the airport express, but it did not work
I successfully reset the airport express once, got it set up, plugged in the new speakers, they worked for about 1 minute, then the blinking yellow error code started on the airport express. Since then I have tried to do a hard reset numerous times and stil get the blinking yellow light. Please help!
hello, it is a known issue that light-weight themes are currently not shown when firefox is set to never remember history (a.k.a. always run in private browsing mode) in firefox/tools > options > privacy. this will be corrected in the upcoming firefox release.
Maybe you are looking for
-
hi our customer wants to be able to start a word document out of a java application (to write a letter...) and to fill in some variables, like the address, also out of the java application... anybody has an idea how to implement that ? thanks, domeni
-
My T400 Monitor is flickering !!!
Hi people.. I had recently got Thinkpad T400 (3 months back).These days for reasons unknown,my screen is flickering at times. Please help.I don't know what the problem is.
-
I am using DVD Studio Pro 2 (version 2.0.5). After recently installing Tiger I have lost the ability to create motion menu's (or to even simulate them in my projects!). When I drag a template menu into the window area, it is displayed, but if the mot
-
I have a Dialog class with 3 Panels and in the first panel I have 3 JRadiosButtoms, all this well except when the user begins to select some of the JRadiosButtoms all the me dialogue begins to move and the size of the components is readjusted and the
-
Adobe reader cannoct contact e-mail service.
Hi to all. Today I got this problem. When a PDF is opened in Acrobat Reader 9.4.4 on a Windows 7 Professional machine, when I try to send it by e-mail, clicking on the button, or by choosing the action from the menu, I get this error: "Acrobat cann