HT1529 The black band which connect the screen and the keyboard of my mac air is broken. Will it get fixed for free by the apple company?  I wonder because I bought this computer for only 6 months!

Can someone plz help me with this problem?

They will probably replace it for free unless they determine it is something not covered by the warranty.  Accidental damage such as caused by dropping something usually isn't covered by the standard warranty.
Make sure you back up your files.  Although this has nothing to do with the hard drive you might wish to remove any sensitive files first, and have copies of all your files just toi be sure.
You posted on the Tiger system forum where nobody runs a MacBook Air.  In future you should check you are posting in the correct forum because that will get you the fastest and most experienced responses for your issue.  I requested your post be relocated.

Similar Messages

  • I suddenly have blue and black vertical lines on my screen. This computer is only 3 months old. What can I do?

    Starting a few weeks ago I got a cluster of blue and black lines at the bottom righthand corner of my screen. It was frustrating and annoying but I ignored it. Now there is another one closer to the top lefthand side. It's very frustrating as this computer is only 3 months old!! please help!

    Take a picture if the problem just in case the aberration does not show in the presence of the technicians.
    Ciao.

  • HT204291 Mirroring is timing out. Have an iPad connected to an Apple TV, and the screen is periodically have to re-initiate Air Play. Is there a fix for this?

    Mirroring is timing out. Have an iPad connected to an Apple TV, and the screen is periodically have to re-initiate Air Play. Is there a fix for this?

    Yes, troubleshoot and correct the problem with the network that is causing AirPlay to fail.

  • Good night I have the question of a message that I have received in my mobile, if I won 715.000 pounds sterling on a lottery contest the Apple company, please let me answer if this is real lottery to send my personal data for the claim this prize.

    good night I have the question of a message that I have received in my mobile, if I won 715.000 pounds sterling on a lottery contest the Apple company, please let me answer if this is real lottery to send my personal data for the claim this prize.

    Scam. Do not divulge any personal or financial information.

  • I brought a new Mac book air but did not buy iWork apps ( pages, numbers and keynote) now that I have downloaded OS Maverick will I get these apps free to download? Because when I visit the store it still has the buy option with the price listed

    I brought a Mac book Air this September. However I did not buy the apps pages, numbers and keynote. I was
    Delighted to hear these apps are free - however when I tried to download them from the
    App Store - I still find the buy button with the price.
    So will these apps be free

    Hello there, Anilkr.
    The following Marketing Page reviews the requirements for upgrading those Applications for free:
    Apple - Up-to-Date Program for Pages, Numbers, and Keynote
    http://www.apple.com/creativity-apps/mac/up-to-date/
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro

  • The disk you inserted was not readable By this computer (Error)

    Hi
    everytime in the last couple of days im inserting a bank Cd to my cd/dvd drive (MATSHITADVD-R UJ-85J) im getting the same error
    "the disk you inserted was not readable By this computer"
    it only happen when the disk is blank. all other disks work ok.
    haven't install any new software or hardware, but had some HDD problems.
    any suggestion what should i do?
    my system profile is:
    version 10.5.7
    Hardware Overview:
    Model Name: iMac
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 2 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version (system): 1.20f4
    Serial Number (system): W873226** <Edited by Host>

    first time posting so not sure this ended up in correct area...
    I had same issue except only repairing the permissions didn't solve anything for me. *_If you recently upgraded your iTunes to 8.2_* check your permissions for errors, fix the errors, then restart computer and if that doesn't fix it, then try one of the 3 solutions below as there is a *known burn issue with the recent 8.2 update!*
    My permission errors - permissions differ on ./Applications/iTunes.app/contents... etc, should be -rw-rw-r--, they are -rwxrwxr-x
    I called Apple Care and we figured out 3 work arounds til a fix is released.
    Solutions 1,2 are recommended by Apple Care. I used solutions 1 (easy) and then 3 (complicated).
    Option 3 is a pain and takes A LOT of time and HD space or external HD if you have tons of music, podcasts, audiobooks, etc, loaded into your iTunes.
    _*3 possible solutions:*_
    1. Use the Finder window already built in the mac (to burn onto blank cds) -
    Open Finder Window, go to File in the Menu Bar at top of computer, create a new Burn Folder, drag items to the folder and click on the burn icon inside the folder, insert blank disk when asked, add name, select burn speed, burn the cd.
    2. Use the app Burn 2.3U -
    Found at Apple.com in download section works like a Finder Window and converts audo files to MP3 automatically. (You can set up iTunes to do this as well)
    3. Install an older version of iTunes 8.0.2 (couldn't find 8.1 thru 8.1.051) -
    I found 8.0.2 at Apple.com, this process is complicated and you will need lots of HD space or external HD to do this because you'll want to back up your music library and you will need to delete version 8.2 BEFORE trying to install an older version. Otherwise stick with option 1 or 2 til a fix is released by Apple.
    I ruined 8 blank cd's that actually burned but then I got the error message "the disk you inserted was not readable by this computer (Error)" at end of burn cycle and sometimes early disk ejections. _*I had no problems before the iTunes update in the past 5 days.*_ Still can't read/play the 8 disks but the problem went away!
    I had burned 20 cds no problem last week with same media disks that were producing errors after doing the iTunes update, now after chosing to downgrade my iTunes I'm back to burning with no issues!
    8.2 has 2 versions 32bit or 64bit, one of them may be PC/Windows version only but not sure which one I upgraded to or if that's even a factor with the permission errors I had.
    Best wishes

  • Updated my iPhone to new iOS6 and my Memory Loader app does not work!  Is there a fix for the problem as it seems I am not the only one coming across this issue?

    Updated my iPhone to new iOS6 and my Memory Loader app does not work!  Is there a fix for the problem as it seems I am not the only one coming across this issue?

    Other than what you have already done, you should clear the cache from your browser and, if you use it, your Facebook app.  Also, deleting old texts can free up some room.

  • My Sandisk cruzer thumb drive 4.0GB (which is very old, roughly 10 years and I'm not sure about the model) reads "The disk you inserted was not readable by this computer" when inserted in my Macbook pro 2010. How do I get it to work?

    My Macbook Pro 2010 with the latest OS does not open a particular Sandisk Cruzer 4.0GB (which is an old model, about 10 years) thumbdrive with the message "The disk you inserted was not readable by this computer". Will I be able to read it on my macbook?

    Is it readable in a Windows computer?  If not then you can try Disk Utility to repair the drive-- although that may be dangerous too.
    I haven't had this problem so I out of safe ideas.  There are ustilies out there.   I used the seach term "repair flash drive Mac OS X" to locate some of these.
    If the data is essential there are pay-for services to recover data looked the price was in the range $50 - $1000
    All the best.

  • My external LaCie drive gets an error message "the disc you inserted was not readable by this computer." The only options offered are "ignore" or "eject" Disk Utility sees the disc but does not give a repair option. What can I do?

    When I plug in my external LaCie drive I get an error message "the disc you inserted was not readable by this computer."
    The only options offered are "ignore" or "eject"
    Disk Utility sees the disc but does not give a repair option.
    What can I do?

    The good thing about mac-centric resellers such as OWC, is they have people on staff that can answer questions without you buying things first. They also have how-to information, and instructions are included in many of their products. I saw a link to watch a DIY video in one of their pages; an example of a RAID (with its own power supply) is shown on their drives page. Also a few in there, with no power supplies, for less money.
    If I were looking to backup and perhaps also have a partition for a system clone, I'd consider something like one of these: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    Some ideas on the RAID backup methods appear in google search, some of the pages are ideas and concepts; and the better ones also warn about using RAID for the only backup plan.
    Oh, OWC has live chat. Haven't tried it, nor have I bought anything from them. I have what appears to be two products from them, but have not used either. One is in a box as-new, but has only USB2.0 ports & my Macs needed FW400/800. It has been said their RAM is a good way to upgrade, too. But I can't confirm!
    A 'RAID-ready' unit for backup may be more versatile for just that, but I have not checked into these details. I use single HDDs in powered enclosures, and usually manually make backup clones to FW drives, of bootable OS X systems. Some of the OWC raid-ready use eSATA ports so that may not be viable for a computer without them.
    The unused in-box external drive I have is like the base model in the link above. However mine is USB2.0 (maybe) and won't boot my older Macs due to hardware variance; and my preference would be for FireWire options, these models do offer that. But the one I have does not. Dual 500GB HDDs, and they could be used in tandem as a RAID. That would be a choice set up in software. I'm not sure and not interested enough to read up just now.
    My backup method is not automatic, or a moving backup plan, if I don't get a move-on and make full system clones. I do make copies of photos and documents the manual way, to USB external drives; and occasionally backup to DVD or CD media. And USB flash, that helps to move files between computers without need to use file sharing via wi-fi. {Like Why fly? Walking is better exercise unless one is a bird. Squawk!}
    https://www.google.com/#q=raid+backup+mac
    Depending on the ports in your Mac, you may be able to use other cables to attach between a backup or externally enclosed hard disk drive with multiple partition and bootable clone in one of them. Not sure about the Thunderbolt, and where that is the main port, adapters are required to access other devices, as allowed.
    Anyway, I am going on and on, yet not really saying anything.
    My ideas would not be all that interesting to follow as a backup
    plan when matching available newer hardware to task, but you
    can get some into better ideas if you are not in a rush. Get a
    good setup and then look into more an betterer stuff.
    Good luck & happy computing!

  • "The disk you inserted was not readable by this computer" box appears when printer cable inserted into USB connection.

    When I plugged my printer cable into my MacBook today I received a message "the disk you inserted was not readable by this computer" with options to Ignore or Eject. The printer worked fine yesterday but does not respond today. Additionally there is abox titled "All Messages" appearing on my screen which is producing new messages every minute or so the most common of which is disk1: I/O error and disk1:alignment error, SAM Multimedia: Read or Write failed.
    I tried unsuccessfully yeseterday to install a scanner on this MacBook.Everything seemed to progress normally during the install but the Scanner did not show in my applications after my attempt to install.
    Any ideas?
    Thank you in advance

    I uninstalled and reinstalled my printer and everything seems to work fine now.

  • I went to back up my Mac on the same Seagate Free Agent I've been using for a year, but I got a message "the disk you inserted was not readable by this computer."  I'm still using Snow Leopard like I've always been.  What is going on, and how do I fix it?

    I went to back up on the Seagate Free Agent I've been using for almost a year.  I got the message, "the disk you inserted is not readable by this computer."  What do I do now?  How can I fix it?

    10.7.4 is not Snow Leopard.    10.7.4 is Lion. 
    Also, is the drive connected via USB or Firewire? 
    If USB are there other devices on the USB bus? 
    Are you using Time Machine, Superduper, Carbon Copy Cloner, or another software?. 

  • My iMac with os x allowed me to edit my administrator in preferences with my info and i didn't select the administrator priv. box now my mac has no administrator is there a fix for this or does it need a re-install :(?

    my iMac with os x allowed me to edit my administrator in preferences with my info and i didn't select the administrator priv. box now my mac has no administrator is there a fix for this or does it need a re-install

    Apple support article:
    Startup Grey Screen
    You can try to check your hard drive.
    Apple Hardware Test doesn't catch everything, so even if it doesn't find a problem, you could have one.
    Apple Hardware Test

  • HT1349 I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

    I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

    The warranty is only good in the U.S.
    You woulod have to send it to someone in the U.S.  They could take it in and if it is defective, then it would be replaced.

  • HT201263 I just bought this iphone not even a month ago. It will not work unless it is plugged into the wall. It will not turn on plugged into a computer. Am I SOL? I do not have insurance.

    I just bought this iphone not even a month ago. It will not work unless it is plugged into the wall. It will not turn on plugged into a computer. Am I SOL? I do not have insurance.

    You do not have insurance.
    You do have a one year warranty on workmanship and materials.
    Call Apple and set up an appointment to have them look at it.
    They should fix it ot replace it for you.
    Allan

  • A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline

    When I select “Update existing software in QuickTime Pro I get an error message saying “A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline”
    This has persisted for several weeks. Any help will be welcomed as I do not know how to contact QuickTime support via Apple.
    I am using Windows 7 64 bit.  
    Many thanks

    I was able to download and install the latest version of iTunes  (10.6.3.25) without a hitch. After the reboot I tried again to update my exisitng Quicktime Pro software as described in my original posting and got exactly the same error message.
    If it happens that there is no software to download because I am already running the latest version, surely a message to that effect would appear and not the one saying “A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline”
    Still seeking advice if possible
    Cheers

Maybe you are looking for

  • Some doubts in alv report

    how can i page breakin alv report ? what are the types of variants and events in alv report? how to hide field in alv? how to change standard pf status in alv reports? plz give me sample program for how to use variants in alv? <THREAD LOCKED. Please

  • My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this

    My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this?

  • CS4 Crashing with PDF export

    I cannot export to pdf without crashing. I have deleted preferences, started in safe mode, used another account, deleted font caches, repaired permissions, sworn a lot (made me feel better) Now I don't know what else to do. the crash report is below,

  • Settings are not saved - network and touchpad

    At one point while trying to set up my network, I set up a static IP. After I had managed to fix the problem, I wanted to go back to using DHCP. If I open Network Settings, I can adjust the settings to use DHCP, but when I reboot, networkmanager reve

  • Check In few files at once

    Hello, frequently we need to check in some text document into CMS, we have original file docNNN.rtf and two translated versions gedocNNN.rtf and itdocNNN.rtf ("ge" and "it" here stands for german and italy accordingly). We want to automate checkin in