HT1535 Problem with books appearing on another ipad

I have bought some books from the store, and they appear on my wife's pad, we have different Apple id's!
The only thing in common is that we have set the same credit card for both accounts Does anyone know how this could happen?
This is only a minor inconvenience for us, but could be really important if say the second pad was used by a child and the books appearing had innappropriate content for that age.

You have probably not signed into your iTunes account on the iPad yet. Are there iBooks books? Sign into your iTunes account on the iPad by going to the settings app and select store and set your iTunes account. You should make sure you are up to date on your version of iOS too by connecting to a computer with iTunes.

Similar Messages

I have a problem with books downloaded in ibooks to my ipad. Full chapters are missing.

I have a problem with books downloaded in ibooks to my ipad. Full chapters are missing. Do others have the same problem?

the article just has instructions on redownloading books after your delete them under the managing contect heading then under Can I download my previously purchased book again at no additional cost?
you can delete books by going into collections then hitting edit
basicish instuctions here http://macinstruct.com/node/451

Hi Apple! I am having a few problems with my 6 month old iPad mini (ios 7.1.1). I am using my iPad and then some time later it just restars! Don't know why and it just keeps doing it! Please fix or if I restore my iPad will it do any good? Thank you

Hi Apple! I am having a few problems with my 6 month old iPad mini (ios 7.1.1). I am using my iPad and then some time later it just restars! Don't know why and it just keeps doing it! Please fix or if I restore my iPad will it do any good? Thank you

Plug your iPad into your computer, open iTunes, and click Restore. This will reset your iPad to factory settings, so make sure everything important is stored safely. Once the restore is complete, do NOT restore from your backup.
If you still have problems, take the iPad to the Apple Store or another AASP (Apple Authorised Service Provider). If you're still within warranty, any service will be of no cost. Check your serial number here or find your receipt.
Hope I've helped!
PS: This is a peer-to-peer forum. Apple generally doesn't pay attention here.

[svn:fx-trunk] 8277: Use blendMode="normal" to fix problems with disabled appearance when baseColor is set.

Revision: 8277
Author:   [email protected]
Date:     2009-06-25 17:46:00 -0700 (Thu, 25 Jun 2009)
Log Message:
Use blendMode="normal" to fix problems with disabled appearance when baseColor is set.
Bugs: SDK-19745, SDK-19762
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-19745
    http://bugs.adobe.com/jira/browse/SDK-19762
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/PanelSkin.mxml
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/TextAreaSkin.mxml
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/TextInputSkin.mxml

This bug figures out also when creating a custom spark ComboBox, then trying to programatically update the userProposedSelectedIndex property. The proposed selected index is selected, but does not apply the same skin as when mouse is on rollover or item is selected due to up and down keys.
The issue seems like updating the status of the item renderer to rollover or selected to get the same skin applied.
Please could you attach DropDow nList.as that you edited ?
Thank you so much.

Problem with buttons in Content Viewer iPad app

Hi,
I'm having a problem with my navigation once my app is viewed on the iPad. All pages in all of my articles are using the same master page for a menu button, and they all work when I view the app through the Content Viewer on my desktop. Once I log in to the Content Viewer on my iPad, however, the menu button on the first page of every article doesn't work. I did a test of swapping the first page with the second page in one of the articles, and the original page's menu button then worked while the second page's (now located at the beginning) wasn't being read. Other buttons on the first page work (which are also from the master page), it's just the menu button that makes my table of contents box appear. I have eleven articles in my folio and it's happening on the first page of every single one. Not too sure what's going on here, any help is appreciated.
Thanks.

I also figured out after playing around with it a bit more that this only happens when "Horizontal swipe only" is checked in the properties.

Lightroom 4.1 problems with book publishing at Blurb

I've done a travel book using the Lightroom 4.1 bookmaking function with Blurb. This has been a major headache. The book is large landscape (13 X 11 inches) with a hardcover image wrap. It is 124 pages on Proline Pearl Photo paper. There are 412 images. Once the book was created I took the time to resize all images to their use in the book to keep the book file to Blurb under the 2 geg limit. It turned out to be 1.1 geg.
I created the book in Lightroom without too much trouble. Replacing each image with the smaller duplicate was a pain. Unfortunately Blurb can't deal with my Lightroom 4.1 book file. They've spent a significant amount of time trying to figure out the problem with this book file. With the book completed I tried to upload multiple times. The images and pages uploaded ok. It would then stall out and give a server communication error after 3 or 4 hours had passed. There are evidently some problems with Blurb and Norton, so I turned that off, with no success. I exported the book as a pdf file, trying to get around the server upload issues. Unfortunately the only choice of pdf version in Lightroom is 1.6. Blurb only works with X-3, so that did not work.
After extensive discussions with Blurb individuals I exported the book as a catalog. This was sent with the images and the .lrcat file to Blurb's drop box.
The information below is their email back to me after Blurb worked with the Lightroom book file.
"Thanks for your patience.
I was able to open your book project without any issues in Lightroom - unfortunately, I wasn't able to upload it to your account or even export it as a PDF or JPG. As a matter of fact, you had more success with it, as the files never even went through the render process for me. To troubleshoot this, I tried the following:
- deleting the cover images/text and choosing a new cover layout.
- deleting the first half of the book project.
- deleting the second of the book project.
- deleting all pages of the book, added 20 blank pages, removed the cover image.
- renaming the project.
- duplicating the project, then renaming it.
After each of these, I tried exporting to PDF and uploading to Blurb, but I had no luck. Unfortunately, it seems that your Lightroom book project may have some sort of corruption in it and that your best bet is to contact Lightroom support directly from the link below. They should have more detailed information on helping you with this problem, as Blurb only handles the actual printing of your file.
http://www.adobe.com/support/imaging/supportinfo/
I'd be interested in hearing what you find out.
I apologize again for the inconvenience."
I appears to me at this point that using Lightroom 4.1 for book production is a lost cause, and it appears to be a Lightroom problem. Do others have these issues also. My plan now is to manually redo the book with the resized images using Blurb's own software. This has been an painful education and my one major disappoinment with Lightroom.
--Gerry

Just got off Adobe Live Chat. A quick summary is contact Blurb. How is that for a run around. This is a major disappointment with Adobe support.

Mocha & Keylight: problems with a greenscreen on the iPad

Hey guys,
at the moment I am doing my first greenscreen project with an iPad (and a TV). But I have a few problems with the turbulent footage.
In the first picture you can see the tracked path on the iPad with Mocha. Everything moves really fine in the final result (see second picture). But there is a lot green left in the person's face and around the screen that I need to get rid of.
So my first question: How do I get rid of those green diffuse edges around the screen and the green in the face?
I tried several keying effects including keylight etc. – nothing worked. Either the green from the plants around dissappeared or it looked really edged. Is the only possibilty using moving masks? Or is there a more precise method?
Second question: How can I isolate the hand from the greenscreen while interacting "over" the iPad? I have a few sequences where the hand of the person is interacting on the (green)screen. So I need to get the screen behind the hand although everything's moving :-/ Is that possible?
Thanks a lot for your support!

Green isn't wrong, but you'll get a better result using tracking and roto using a dark gray screen unless the objects passing in front of the screen are very complex. The dark gray screen allos you to pick up reflections and add them to the composite easily. It just looks more real. Mocha can generate the roto as well as the track. If you have a lot of movement then you have the same problems that you have with a bunch of movement on a green screen set. Edge contamination, motion blur, details being lost. With lots of detail and lots of movement you need a very good camera with a very good lens and a lossless or nearly lossless original. Shooting with a professional cine camera that shoots raw or 10 bit uncompressed is the only way to capture that kind of fine detail and pull it out in a key. Consumer and prosumer cameras just dont give you the color information or the resolution necessary to really do a great job with fine details. Acceptable for most work but not great.
I guess my point is that if you shoot on a green screen you have to plan for color suppression and spill control on set. Plan your back lighting, and accept the fact that you'll have to do a bunch of color correcting and color suppression that you don't have to do if you shoot for roto. This gets into art direction, costuming, and set design. It's all about planning and the quality of the photography. If you are going to suppress green then you better not have anything in the scene that is important and green. Look at what happened to the green in the flower arrangement and the green in the plants in the window in my example below. A good set designer would have worked around that or let you know that you needed to do some rough roto work on the piece to restore those greens in the shot.
I've done a ton of screen replacements for phones and ipads. We carefully plan the shoot so that there's just a bit of simple roto work. If we do need to use green screen (or blue or orange depending on the art direction of the scene) we keep the exposure levels down and the reflected light down. The biggest problem you have in your scene is that the green from the TV and the green from the tablet are so bright they are acting as light sources for the set. This is where an experienced cinematographer or vfx supervisor would have saved you a bunch of time in post.
When you're stuck with footage with a lot of spill you have to isolate that spill and try and remove as much color as you can.
Try this with keylight. I'm using your mocha.png. I set keylight to view the corrected source then set foreground color correction to on and set color suppression to green, then I set edge color correction to on and set color suppression to green. There is no green left in the image. Your green edges should be gone completely. As you can see, with these settings, the green from both screen is completely gone.
To restore the green in the flower arrangement and the window just duplicate your keyed layer, do a rough roto around the flowers and the plants and reduce the color correction and color suppression to bring back the color there.
This shows you that you'll need another layer to fix the color problems. Most of my work that involves keying results in a comp with 5 or 6 layers just to control the color, most of them copies of the main plate (green screen footage) two or three copies of the replacement footage (things that fill the green screen) a layer for light wrap, a layer for lighting effects, one or two layers for reflections if there are shiny things that are being keyed. and an adjustment layer for final color correction. Sometime two or three adjustment layers for color correction.
Great compositing is seldom if ever two layers and one instance of Keylight.

Problem with viewing modules on iPhone / iPad

Hello. I have a problem with viewing my modules on iPhone and iPad. I have the same problem previously with Captivate 6, which I honestly thought that it is solved on Captivate 7, downloaded the trial version just to test it and I got nothing improved about that,
So, when I publish and upload my course on cloud.scorm.com I got this:
iPhone - It only shows the top left of slides and I get full voiceover
iPad - shows photo top left on last slide (not first?) and hangs with no voiceover
This is a simple 4 slide course which I use for testing the project.
If someone wants to test here is a link: http://cloud.scorm.com/sc//InvitationLaunch?userInvitationId=d75b27a6-e7df-41fa-87e6-d7576 48aea93
And I really expect some help with this, because it's really important not to have this type of problems.
Thanks.

"And I really expect some help with this..."
Please remember that this is a user forum, not Adobe Support. If you've paid some money for something and it's not working as you expect, you certainly have the right to require the manufacturer to provide after sales support.
But you would not track down another purchaser of the same product and tell them they owe you support...would you?

I am having problems with my wifi on my ipad its stopped connecting, its fine with my laptop and iphone but not ipad - I want to know if I can set up by plugging in to itunes rather than manually as it wilask me to connect to wifi to set up and I cant!

I am having real problems with wifi on my ipad it was fine but for the last week or so wont connect! my laptop and iphone are connecting fine, I have tried everything! back up and restore from back up and still no joy so I am thinking of restoring the ipad to a new one the worry for me is with this is when you set it up you go through the instructions and it asks you to connect to a wifi network and as it wont Im worried I wont be able to set it back up so need to know if I plug into itunes can I set it up this way? can anyone help me please Im going crazy with this!!!

BOB we need you urgently
Perhaps Bob will see this thread, he is the professor in these cases.
You do not use a WEP password but wpa/wpa2 on router and equipment.
All equipment connects to WiFi, but for your iPad.
Even with all other equipment WiFi off, you cannot connect your iPad.
Your iPad connects to other WiFi nets correctly.
All resets etc done on iPad and Router.
Still I am not sure it is your router for sure, frustrating...
I want to test 2 other things:
1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect.

Problem with file locked by another user

I have a problem with a user on Windows 7 in my network when accessing a single .xlsx file. When Jane Smith opens said file, she gets a message that the file is locked by Jane Smith but she has checked and it was in use by another user, Roger Smith.
This happened over a weeks time and is not a one-off situation. Researching online, I tried one suggestion by going to Roger Smith's computer and into the registry under HKEY CURRENT USER, navigated to "Software\Microsoft\Office\15.0\Common\UserInfo",
expecting to see Jane Smiths name and initials. Nope, that wasn't the problem. I went ahead and deleted extra profiles on the computer and ran a repair on Roger Smiths Office 2013.
It was okay for a half a day then towards the end of the day, Jane Smith calls back to say again the same file is locked by Jane Smith yet this time Diana Smith had the file open.
So, the file is locked but why is Excel not reporting the correct user? What can I do to address this?

These all reference Office 2007 and 2010. As far as you know, all of these fixes still apply to Office 2013?
example: they give two updates to download.
Excel 2007 - http://support.microsoft.com/kb/2598133
Excel 2010 - http://support.microsoft.com/kb/2598143
No option for 2013.
but this could be useful no matter the version.
In the Shared folder or the File Server;
Open the folder where the Document is located.
Click Tools=>Folder Options
Click the View tab
Scoll down to Advanced Settings>Hidden files and folders
Select Show hidden files and folders and Unselect Hide protected operating system files
Look for a temp lock file and delete it. It should look something like
~$filename.xlsx or whatever file extension the it was saved in.
(In my case, this file had become corrupt and was stuck displaying an earlier modify date from a few days ago..)

Problem with downloading iOS 5 for iPad 2

I face problem while downloading iOS 5.0.1 for iPad 2. First, I have upgraded the latest version of iTune and followed the onscreen instruction for downloading iOS 5.0.1 already. However, when the downloading process continues about half an hour, I get the following message: "There was a problem downloading the software for the iPad. The network connection timed out. Make sure your network settings are correct and your network connection is active, or try again later." I try to verify and see that there is nothing wrong with my network connection. Then what should I do to get iOS 5.0.1?

Have you a firewall or anti virus software enabled? If so, disable it temporarily.

Problem with creating site from another computer!

Hi
I have WebDB 2.2 and Oracle8i instaled on the same computer. I have a problem to create site from another computer. There is not any process when I try to create site. There is always 0%.
But I have no problem with creating site on the origin computer.
Does anybody know something about it?

I am just not clear what to do once I have made changes and have published the new information.
You shouldn't have to do anything. iWeb will save the information in the Domain.sites file. You can keep this file in a folder, or even on your desktop and iWeb will launch from a double-click on the file.

Problems with running AIR on another computer

Hello,
I developed an Adobe AIR application and I want to give it
to some users in order to do evaluation related to my research. I
exported the project to air file and installed it on another
computer. After running it an empty screen was shown, but not my
application. It looks in the same way as in the design view of Flex
Builder – empty. I tried the same for some other simple
applications and I did not have that problem. The application I
have problems with is in a few files and has about 4000 lines of
code.
Can I have some assistance, please?
Regards

Could the app. run correctly on your own machine after you
exported the app.?
You might need to make sure you package all the files you
need into the AIR file.
-ted

Problems with iOS 7 on new iPad

I just got the new ios7 and now my iPad is not working, it freezes up and it Will not turn off or anything

Resetting has NOT solved the problem, sorry.
My iPad is running ios 7 and freezes when trying to download videos from itunes. Did NOT have this problem with iOS 6. Have rebooted several times... Even rebooted w/ red bar...iPad boots back up, then I try download again, it freezes and I have to reboot again.
Is there a list of apps that have comparability problems with ios7?
I know apple must be working on the problem, but if anyone has a even a temporary workaround, that would be great.
Thanks

I have a problem with the microphone of the iPad Mini

Hello!
The problem I have is that my Ipad mini microphone stopped working. Do not respond or video using the active or when Siri.
I rebooted the iPad and I also have not gotten restored and fix it.
Any idea or solution? Thank you very much!

If you know the answers to your security questions, or if using two-step verification know your recovery key, you can use these as authentification to reset your password rather than your email. These althernative approaches to resetting your password are explained here: http://support.apple.com/kb/HT5787.
If you don't know these, and can't access your email account, you'll have to contact iTunes store stupport for assistance: https://ssl.apple.com/emea/support/itunes/contact.html.

HT1535 Problem with books appearing on another ipad

Similar Messages

Maybe you are looking for