Lightroom 4.1 problems with book publishing at Blurb

I've done a travel book using the Lightroom 4.1 bookmaking function with Blurb. This has been a major headache. The book is large landscape (13 X 11 inches) with a hardcover image wrap. It is 124 pages on Proline Pearl Photo paper. There are 412 images. Once the book was created I took the time to resize all images to their use in the book to keep the book file to Blurb under the 2 geg limit. It turned out to be 1.1 geg.
I created the book in Lightroom without too much trouble. Replacing each image with the smaller duplicate was a pain. Unfortunately Blurb can't deal with my Lightroom 4.1 book file. They've spent a significant amount of time trying to figure out the problem with this book file. With the book completed I tried to upload multiple times. The images and pages uploaded ok. It would then stall out and give a server communication error after 3 or 4 hours had passed. There are evidently some problems with Blurb and Norton, so I turned that off, with no success. I exported the book as a pdf file, trying to get around the server upload issues. Unfortunately the only choice of pdf version in Lightroom is 1.6. Blurb only works with X-3, so that did not work.
After extensive discussions with Blurb individuals I exported the book as a catalog. This was sent with the images and the .lrcat file to Blurb's drop box.
The information below is their email back to me after Blurb worked with the Lightroom book file.
"Thanks for your patience.
I was able to open your book project without any issues in Lightroom - unfortunately, I wasn't able to upload it to your account or even export it as a PDF or JPG. As a matter of fact, you had more success with it, as the files never even went through the render process for me. To troubleshoot this, I tried the following:
- deleting the cover images/text and choosing a new cover layout.
- deleting the first half of the book project.
- deleting the second of the book project.
- deleting all pages of the book, added 20 blank pages, removed the cover image.
- renaming the project.
- duplicating the project, then renaming it.
After each of these, I tried exporting to PDF and uploading to Blurb, but I had no luck. Unfortunately, it seems that your Lightroom book project may have some sort of corruption in it and that your best bet is to contact Lightroom support directly from the link below. They should have more detailed information on helping you with this problem, as Blurb only handles the actual printing of your file.
http://www.adobe.com/support/imaging/supportinfo/
I'd be interested in hearing what you find out.
I apologize again for the inconvenience."
I appears to me at this point that using Lightroom 4.1 for book production is a lost cause, and it appears to be a Lightroom problem. Do others have these issues also. My plan now is to manually redo the book with the resized images using Blurb's own software. This has been an painful education and my one major disappoinment with Lightroom.
--Gerry

Just got off Adobe Live Chat. A quick summary is contact Blurb. How is that for a run around. This is a major disappointment with Adobe support.

Similar Messages

I have a problem with books downloaded in ibooks to my ipad. Full chapters are missing.

I have a problem with books downloaded in ibooks to my ipad. Full chapters are missing. Do others have the same problem?

the article just has instructions on redownloading books after your delete them under the managing contect heading then under Can I download my previously purchased book again at no additional cost?
you can delete books by going into collections then hitting edit
basicish instuctions here http://macinstruct.com/node/451

Problem with AUTO PUBLISH nd update NEW POLICY to Client .

To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find is there any setting which can "AUTO PUBLISH " into the Client side . Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT side need to manually click the UPDATE POLICY , so i would wonder is there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the end of the setup server and the IT infrastructure .

I would recommend that you READ and UNDERSTAND the Installation and Administration guides from the Documentation (somebody took the job to write those, so be kind enough to read it)
Main Doc
http://www.novell.com/documentation/zesm41/
Your question is answered here:
http://www.novell.com/documentation/...a/bnk7bdx.html
See "Update Interval".
Lastly, this is a public support forum, served on a best-effort basis from the community. As such, there's no guarantee that you'll get an answer, and if you get one, that works and is correct. So, if you have un urgent or important issue, go ahead an open a support ticket with Novell Technical Services in order to be served by professional support engineers backed up by the engineers who wrote the code.
http://support.novell.com/contact/
>>>
From: nxgame<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 12/11/2010 3:06 pm
Subject: problem with AUTO PUBLISH nd update NEW POLICY to Client .
To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find
is there any setting which can "AUTO PUBLISH " into the Client side .
Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT
side need to manually click the UPDATE POLICY , so i would wonder is
there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the
ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the
end of the setup server and the IT infrastructure .
nxgame
nxgame's Profile: http://forums.novell.com/member.php?userid=99703
View this thread: http://forums.novell.com/showthread.php?t=427947

Lightroom 4.3 Problems with Photobooks

I am creating a photobook using Lightroom (Version 4.3). I am using individual backgrounds which I have designed in Adobe Illustrator. I have exported the files from Illustrator as jpg. I have the following questions:
1) There are two presets for backgrounds in Lightroom (Travel and Wedding). Can I add my own backgrounds to a separate preset?
2) From time to time I have a problem exporting the photobook as a pdf or transfer it to blurb. When I remove my individualized backgrounds there is no problem with the export function. Has this issue something to do with my backgrounds. Should I use a different format (other than jpg) for the background?

1) The templates are added not very simply added. If you are on Windows, navigate to the Lightroom application folder and look for the Layout Templates folder within the Templates folder. There you will see a folder for each size of book, within which will be the different layout themes, within which you will see all of the files required to add a layout theme. Plus, you'd need to modify some of the files in the parent folders. Not exactly easily done. And it's trickier on the Mac side. There are likely some who have gone through all of this work and created their own layouts, which you could probably download (free or purchase is up to them, of course).
2) All of the built in layouts use JPEGs, so that shouldn't be the issue. It may be a question of their size or compression settings. Look at the existing files and make a comparison.

Problem with iWeb publishing to IE

Hello, I am experiencing a problem with iWeb '08 publishing content to Internet Explorer. The images and web pages look fine in Safari and in Firefox, but a lot of the web page images are mirrored in IE, covering up large parts of the text. Please don't tell me I have to spend $79.00 on upgrading to iLife '09. I just upgraded my iWorks to '09, but would upgrading to '09 in this instance even be the answer? Please advise. I fear that I will alienating any of my IE web surfers. Any help and advice would be greatly appreciated. Thank you.

Hello and welcome to the board.
IE is a terrible browser to render pages made with IWeb (I'm not sure upgrading to ILife 09 will fix your problem).
I decided to somewhat "alienate" my IE visitor by putting a message on my home page that recommend them to use a compatible browser. Check my page (using IE here: http://www.wesdotphotography.com/Home.html) and look at the message. Also if you use any other browser you will not see my message and will experience a better browsing. It is not the fault of IWeb but more like Microsoft not writing a proper browser. a lot of people will confirm my say.
Search this forum and you will see a lot of complaints about IE.
Good luck
Thierry
PS: post you website so we can take a look.
+Disclaimer: I may receive compensation via Google ads if you visit my website.+

Problem with XML Publisher report when there are no detail records.

I am working on an Oracle XML Publisher procurement report (Oracle E-Business Suite R12) that starts with a budget amount that is imported from our financial system, then lists all requisitions and orders that are in process (not approved). The amounts of all those unapproved requisitions/orders are totaled using a Sum form field, to be followed by a field where the unapproved requisition/order total is subtracted from the budget amount (amount available). I am running into a problem when there are no unapproved requisitions. When I run the report for such instances, it completes with a warning -- here is what it states in the OPP log:
oracle.xdo.parser.v2.XPathException: Extension function error: Method not found 'sum'
I have altered my sum field on the RTF template to include an if statement in case of a null value...
<?sum (EXTENDED_COST)?> <?xdofx:if sum (EXTENDED_COST) = " then 0 end if?>
...but this does not work.

Hi,
You are on right track. Simply put summary field in header group and remember to set reset at property to Header Group Not Child and now you can use this field in format trigger.
Format trigger must be written on header frame.
Cheers !
Adinath Kamode

PROBLEM WITH XML PUBLISHER AND GRAPH NOT DISPLAYING IN ORACLE APPS

Hi
All you XML Gurus here. I have a problem, When i create a report in XML Publisher desktop i can see a graph im putting into the report on preview and works fine. But when i upload the report as a rtf file into Oracle applications i can see everything else the table logo and stuff .. But just not the Graph Itself when run on the concurrant manager....
Problem number 2
Is there a way that i can use XML Desktop and create a line graph with 2 lines rather than 1 plotting
here is my xml for graph i have made with one line
chart:
<Graph>
<Title text="" visible="true" horizontalAlignment="CENTER"/>
<LocalGridData colCount="{count(.//SELF_OTHERS)}" rowCount="1">
<RowLabels><Label></Label></RowLabels>
<ColLabels>
<xsl:for-each select=".//SELF_OTHERS"> <Label><xsl:value-of select="BEHAVIOUR"/></Label>
</xsl:for-each>
</ColLabels>
<DataValues>
<RowData>
<xsl:for-each select=".//SELF_OTHERS"> <Cell><xsl:value-of select="SCORE"/></Cell>
</xsl:for-each> </RowData>
</DataValues>
</LocalGridData>
</Graph>
All help would be much appreciated to my 2 problems....
Thanks
Sha

Hi All
Will post solution tomorrow or Monday on blog. Heres the chart XML for now.
chart:
<Graph graphType="LINE_VERT_ABS"><LegendArea visible="true" />
<LocalGridData colCount="{count(xdoxslt:group(.//SALE, 'YEAR'))}" rowCount="3">
<RowLabels>
<Label>SOFTWARE</Label>
<Label>HARDWARE</Label>
<Label>SERVICES</Label>
</RowLabels>
<ColLabels>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Label>
<xsl:value-of select="current-group()/YEAR" />
</Label>
</xsl:for-each-group>
</ColLabels>
<DataValues>
<RowData>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/SOFTWARE)" />
</Cell>
</xsl:for-each-group>
</RowData>
<RowData>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/HARDWARE)" />
</Cell>
</xsl:for-each-group>
</RowData>
<RowData>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/SERVICES)" />
</Cell>
</xsl:for-each-group>
</RowData>
</DataValues>
</LocalGridData>
</Graph>
with the following data
<?xml version="1.0" encoding="UTF-8"?>
<SALES>
     <SALE>
          <YEAR>2006</YEAR>
          <SOFTWARE>1200</SOFTWARE>
          <HARDWARE>850</HARDWARE>
          <SERVICES>2000</SERVICES>
     </SALE>
     <SALE>
          <YEAR>2007</YEAR>
          <SOFTWARE>1000</SOFTWARE>
          <HARDWARE>800</HARDWARE>
          <SERVICES>1100</SERVICES>
     </SALE>
     <SALE>
          <YEAR>2008</YEAR>
          <SOFTWARE>900</SOFTWARE>
          <HARDWARE>1200</HARDWARE>
          <SERVICES>1500</SERVICES>
     </SALE>
</SALES>
The latest Template Builder makes this a cinch!
Regards
Tim
http://blogs.oracle.com/xmlpublisher

Problem with book table of contents

Hi all
We are switching from 9.3 version to 11.1.2 . Generating a book pdf, happen a strange thing: the table of contents page is generate in the summary of acrobat, but it contains the first page of reports, so all the book pages result switched of 1 page respect the pdf index. Deleting a certain number of reports from the book the table of contents appears. Do you have idea what can cause the problem?
Thanks
Davide

There are some issues with 11.1.2.0 version with PDF output.Make sure that you have the latest patchset for FR.

Problem with facebook publish

I don't often publish to facebook, but in the past I have created several collections under the facebook publish service, each going to its own album of the same name.
However today I decided to add 2 photos to an existing album, but when I click publish they appeared in a new album called "Adobe Photoshop Lightroom Photos" instead of the existing album.
Is this a change in the plugin or maybe something facebook has changed?
Is there any way to get it to publish direct to albums again?

I feel like I am talking to myself, but at least it is documented for others to find.
I set about doing some investigating of my own and this is what I found was that the hilda url was mentioned in the Catalog.lrcat file, so using the sqlite3 command line tool I started to look at old copies I had in TimeMachine
Back on 2011-11-27 Catalog.lrcal contained
sqlite> select * from AgLibraryPublishedCollection where id_local in (495048, 603758);
           id_local = 495048
         creationId = com.adobe.ag.library.collection.published
          genealogy = /6495013/6495048
         imageCount =
isDefaultCollection =
               name = My Girls
             parent = 495013
       publishedUrl = http://www.facebook.com/album.php?fbid=40409577156&id=522867156&aid=54424
remoteCollectionId = 40409577156
         systemOnly = 0.0
Then sometime before 2011-12-04 I added a 500px published collection with the same name and the catalog changed to
sqlite> select * from AgLibraryPublishedCollection where id_local in (495048, 603758);
           id_local = 495048
         creationId = com.adobe.ag.library.collection.published
          genealogy = /6495013/6495048
         imageCount =
isDefaultCollection =
               name = My Girls
             parent = 495013
       publishedUrl = http://gbarr/my_girls
remoteCollectionId = 34451.0
         systemOnly = 0.0
           id_local = 603758
         creationId = com.adobe.ag.library.collection.published
          genealogy = /6603753/6603758
         imageCount =
isDefaultCollection =
               name = My Girls
             parent = 603753
       publishedUrl = http://gbarr.500px.com/my_girls
remoteCollectionId = 34451.0
         systemOnly = 0.0
See how the publishedUrl and remoteCollectionId both got changed for thr facebook collection
Later in December I did a software update of Lightroom to the latest but at the time of adding the 500px published collection I would have been running the latest release at that time.
Then on 2012-01-24 I attempted to publish to the facebook collection and it instead created the "Adobe Photoshop Lightroom Photos" album. Looking at the first archived copy of Catalog.lrcat after that we can see the publishedUrl got changed
sqlite> select * from AgLibraryPublishedCollection where id_local in (495048, 603758);
           id_local = 495048
         creationId = com.adobe.ag.library.collection.published
          genealogy = /6495013/6495048
         imageCount =
isDefaultCollection =
               name = My Girls
             parent = 495013
       publishedUrl = http://www.facebook.com/hilda.zacarias
remoteCollectionId = 34451.0
         systemOnly = 0.0
           id_local = 603758
         creationId = com.adobe.ag.library.collection.published
          genealogy = /6603753/6603758
         imageCount =
isDefaultCollection =
               name = My Girls
             parent = 603753
       publishedUrl = http://gbarr.500px.com/my_girls
remoteCollectionId = 34451.0
         systemOnly = 0.0
It is probbaly no coincidence that the facebook profile id of Hilda is 34451
http://www.facebook.com/34451 redirects to http://www.facebook.com/hilda.zacarias
So that probably explains where the URL came from
But it seems there may be a bug creating collections of the same name on different publishers.
I used the sqlite3 command line tool to fix the values of publishedUrl and remoteCollectionId back to what they were on 2011-11-27 and now it publishes to the correct facebook album.

Problems with iWeb publishing to MobileMe

Hi,
Did you have some problems since about four days on publishing with iWeb to MobileMe? In my case, when I publish my site - and I made just little changes - iWeb publish ALL the pages.
I early had this same problem, this spring, and it was a MobileMe problem; Apple just made a little update to the server and it was ok.
I'm using iWeb'09
Thanks

With a lot of media content have you considered other ways of adding movies or audio tracks that only require you uploading those file manually once and then linking to them. For movies this demo page has one possible method: Opening Item in a New, Precisely Sized Window. This demo page has 7 movies added that way. They don't load until the play button is selected. PhotoPresenter Animated Slideshow Themes
For audio you can use flash players or a flash jutebox. Roddy's site, iWeb for Musicians, has examples and how-to's for both. See the following pages: Music Players and the following 3 pages after it. See the Next Page button at the bottom.
I've got a couple of flash players on my demo page: Music Players.
There are many alternatives to having to load all the media each time you republish.
OT

P6 R8.3 Problems with BI Publisher, Team Member

Hi
I am setting up a demo server with P6 R8.3 EPPM. The process I have followed so far is:
Install Windows Server 2008 R2 SP1 on the box (2 x Quad Core Xeon, 16GB RAM, 2 x 300GB drives)
Install SQL Server 2005 and copy across our current demo R8.2 EPPM database
Install JDK 1.6.0_41 64 bit
Upgrade the database to R8.3
Create a new Middleware Repository for BIP
Do a "simple install" of 64bit BIP from the "generic" distro to create an instance of WebLogic 10.3 and BIP 11.0.0.6.0 within it
Install P6 R8.3 and configure it to deploy into the existing WebLogic instance
Copy the P6 Reports into BIP and set up BIP as per the docs
I had to use the db configuration tool to create (?overwrite) the old P6 Configuration data in the database as when using the web P6 Administrator it was telling me that no database was configured for administration, and I have then gone in to adjust the URL for the database and the link to BI Publisher.
The supported configurations document also says that a patch needs to be applied to WebLogic 11g and I have tried applying it but it seems to be ignoring it - an earlier build attempt using a 32 bit version of WebLogic installed separately from BIP did take the patch, so maybe there is a later version of WebLogic bundled with BIP?... In any case, I am not seeing the error the patch was released to fix.
As of now, I have a working P6 environment with all data carried over from the 8.2 environment. There are 2 odd things happening though, and I can't see any reason for them:
First, any user trying to access Team Member Web Services gets an error message at login saying they are configured to use Progress Reporter to update progress. This happens regardless of the Module Access settings for that user, it just doesn't seem to work any more. Is there more I have to do here?
Second, I can't get the reports tab in EPPM to work, and always get the error message saying that the user is not configured in BI Publisher. Just to be clear what I have done:
I followed the procedure in the docs for setting up P6 reports in BIP and have checked it numerous times.
BIP is using the BIP Security model with a local superuser
The JDBC connection to the P6 database works, and I can login as any of the users in BIP that I set up to match the P6 users, and execute reports within BIP and see results returned
Those P6 users have got Enterprise Reporting module access
I have bounced both P6 and BIP several times within WebLogic, and WebLogic is showing all the various subsystems are running OK (as is Enterprise Manager)
I have compared the setup of this version of BI and P6 to those in our working R8.2 system, and the only 2 differences I can see are
BI is 11.0.0.5.0 for R8.2 and 11.0.0.6.0 for R8.3
When I assigned the data model to the reports in R8.3, the icon for the report disappeared and now just displays as a black box with an x in - but it only did this for some reports (eg the Activity ones)
One thing I am not clear on is the format of the URL for the BI web services - some docs say it should end in ?WSDL, others don't (for the combination of BIP 11g and SQl Server). I have tried both forms without seeing any change in behaviour (Typing either form into a browser results in a response so the web services system is definitely alive).. I have also tried changing the path to the reports from "/P6Reports" (which it actually is) to "/P6REPORTS" (which works in our R8.2 system, even though that's not what the folder is named - its also /P6Reports), but again that doesn't make any difference. Finally, I have tried logging into BIP directly using the credentials saved in the configuration and they work fine.
I am completely stumped - can anyone offer any further things to try out?

Alex
I have finally had an answer from Oracle about the BI Publisher issue, which is due to the fact that I installed the WebLogic bundled inside the Oracle Business Intelligence media set which is 10.3.5, while P6 R8.3 requires 10.3.6
So for the products to share an instance of WebLogic that both can use, you have to install WebLogic first from its own media set and without creating any domains. Then you patch it as specified in the Supported Configurations document, then install BI Publisher using the "Software Only" option, deploy that into a new domain, and finally install/deploy P6 into its own domain.
I now can see the reports in P6, but running them within P6 is producing an error. The Team Member issue is still partly there - assigning Team Member access to a user who didn't previously have it seems to work, but those who had it in 8.2 still can't login as the system still thinks they are set up for Progress Reporter. We have also encountered a problem where the whole top half of the user interface - the main tabs and the menu in the top RH corner - all is grayed out and becomes inactive at various points. I have found this listed as a bug related to Java 7 in the client browser which is fixed in R8.3 SP1 so I am now going to try to install that across all the various components of the product and see what happens...

Problems with a Published PDF audio/video that runs out of synch

Hi,
I have a large (30minute) video, with a combination of audio, flash videos with and without embedded music, and screens.
I published the captivate project to PDF, and then ran it using Abode Reader X and Flashplayer 11.01.
It played fine.
However, I am getting feedback from various people that when they try and run the video, the initial embedded flv file (with music) starts off and then suddenly the entire PDF file goes wild displaying screens in 1 second intervals in no apparent pattern with the music from the embedded flv file still playing in the background, eventually the voice over starts but obviously out of synch as the slides still appear in these 1 second intervals.
I ran a few tests to see if this strange behaviour had anything to do with the Adobe Reader or Flash Player installed, but there seems to be no pattern.
I even upgraded one system to Adobe Reader X and Flashplayer 11 but still experienced this same problem.
Does anyone have any suggestions as to why this might be happening for some users and not for all? Or what other settings I might try looking at to solve the problem?
Thank you,
Tannis

We will need a lot more information about those Videos. This ARTICLE will give you ideas on the info that will be so very useful for us to help you.
This ARTICLE will give you some background on Video formats/CODEC's.
Good luck, and please let us know more about those files. A screen-cap of G-Spot would be very useful.
Hunt

Problem with "lbl.publish" transition when skip approval programmatically

Hi all ...
I am currently trying to "Skip Approval" programmatically by executing the "lbl.publish" transition, like this in a KM repository service:
IRepositoryServiceFactory repositoryServiceFactory =
   ResourceFactory.getInstance().getServiceFactory();
IStatemanagementManager statemanagementManager =
    (IStatemanagementManager) repositoryServiceFactory.getRepositoryService(resource, IWcmConst.STATEMANAGEMENT_SERVICE);
IStatemanagementResource sResource =
     statemanagementManager.getStatemangementResource(resource);
IResourceTransition resourceTransition =
     sResource.getTransition("lbl.publish");
if (resourceTransition != null)
    resourceTransition.execute();
But this do not work, and instead raise this ExecMessage: <b>"You are not allowed to carry out this action"</b>
Please Help
Best regards
Jonathan

Thank you Ankur...
Your tip solved my problem; I already reward you with 10 points!!
Best Regards
Jonathan.

Is anyone else having problems with books from Lulu?

I am working on a Mac and recently downloaded Adobe Digital Editions. I have a book from Google and a free book from Adobe, both are fine. But I recently purchased two books from Lulu, an ePub for Digital Editions and a PDF for Digital Editions. When I try to download them I receive the .acsm file, but when I click on it, I get an error message in ADE of:
Error getting license
Server communication problem: E_ADEPT_IO
I tried uninstalling and reinstalling the software. I tried the chat support but was not able to fix my problem. The attempted solutions were to check my clock settings (automatic and correct), download Google Chrome (ugh, my third browser, really?) and then turn off the firewall and ensure the proxy settings are set to bypass for http://adeactivate.adobe.com/. Still not successful. I keep getting the same error message. Has anyone else successfully fixed this error? Haha, old school books are looking better and better right now.

Stuck in the software time warp, eh?
First, the error message isn't described very well - and shame on Adobe for
that. If I understand it correctly, it's telling you that you can't
establish a connection with your ebook source because of security issues.
Monkeying around with ADE software isn't going to help at all, as you've
found out. Cross your fingers that something inside ADE hasn't gone awry
with all of the installs you've done.
You're in a MAC world, and I'm still a Windows guy, so I can speak only
generically about what's going on. No - you don't need a new browser.
It's probably not a clock issue either, because that's a different cryptic
error message. So, we're back to the security settings. Something isn't
right - but not being a MAC guy, I don't know what knobs to tweak.
===============

Excel Output problem with XML Publisher Report

Hi Experts,
I am working on XML Publisher report with EBS 11i and database 9i. My XML Report output type is EXCEL, i have below issue with the output.
I have column 'quantity' with xml tag <?QUANTITY?>.
In the XML file it's showing the value '028' for quantity, but when i open the output in EXCEL, it's showing up '28', removing leading zero. I want to show the data in EXCEL also '028'. Could somebody help me how to print the XML Tag value as it is in EXCEL output.
Thanks in advance.

Hi, try using this in your template.
<fo:bidi-override direction="ltr" unicode-bidi="bidi-override"><?QUANTITY?></fo:bidi-override>

Lightroom 4.1 problems with book publishing at Blurb

Similar Messages

Maybe you are looking for