HT1551 I need to set up date and time on my apple tv.... Not doing it automatically ... I am connected to a router that works on a wireless sim card

I need to set up date and time on my apple tv.... Not doing it automatically ... I am connected to a router that works on a wireless sim card ...

OK.
Go into Settings on the Apple TV and then General-> Time Zone.
Turn OFF automatically and put your location in manually under Time Zone.

Similar Messages

  • HT1551 Can't seem to set te date and time...?

    We are setting up our Apple TV...we can't seem to set the date and time....it just keeps searching?

    All good....the wifi wasn't turned on.....!

  • HT1551 Is setting the date and time a one-time process?

    Is setting the date and time a one-time process?

    What exactly do you mean? You don't know how to set the time? You set the time but something changes it?

  • On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen

    On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen. The setting is on automatic and I have picked a city in my time zone yet it still tries to set a time and date but fails.
    thanks

    Make sure router is up to date. Try ethernet to rule out any wifi issues. Reboot ATV and router.

  • How can I set my date and time to ebay network time server?

    In the system preferences I would like to set the date and time to ebay UK time?
    I thought a quick google would be bring up the server and I can't find it.
    At the bottom of every ebay page there is a link to official ebay time
    But its not a live feed of time to get it to the second.
    I want it to be accurate so that I can use applescript to snipe bargins.
    Many Thanks
    Matt

    Just trying to go along the free route. I found Garage Buy   This doesn't work to well but lets you create an applescript and enters the auction into ical. Then you can set ical to run the script once it gets closer to the time.
    Ical only lets you set a time of a minute before the date. So you have to edit the script to add a Delay 59 to have it run 1 second before. From a few refreshes of the time page it looks like ebay time is a second behind, that could be easily be due to time to load the page. anyway i'll opt for a delay of 57secs and give that a try.

  • From yesterday, I have been facing the problems in my iphone and my wife iphone. The same problem, "cannot connect to itunes store". I have strong internet connection. I tried all the possible way I could like setting, general, date and time.....etc.

    I have proble of "cannot connect to itunes store. After I have updated the new software ios6, the problem arised in one of my mobile. In the second mobile, I didnot updated the software.Today in the morning, the problem ariesed in that mobile as well. I cannot open the itunes, don't have access to apple store . I tried to solve the problem like going to setting, general, Date and time, automatically off, keeping one year ahead date. I tried all the possible options I could get from the googel. How do I get rid of this problem?

    No - I have not tried other routers on my network.
    What I meant was I could use my itouch on other users wireless networks without any issues.
    I'll update the routers DNS to try  using Google's 8.8.8.8 instead of my ISP.
    Is the issue DNS performance using local ISP -or are there other possibel isues when using local isp DNS?

  • Set the date and time

    how to set the date and time in apple tv?

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Setting the date and time on my Verve 450 answerin...

    I have set the time and date on all the handsets, but when we pick up a voicemail, the date and time on the message bears no relation to reality!  The instructions do not provide any advice on setting the date and time on the answering machine.

    Well after i change it it seems fine, but when i use it another time it has been changed.

  • HT2822 Setting up date and time is taking forever and failed to do it automatically or manually.

    Hello:
    When I tried to configure my new Apple TV for some reason it kept trying to set the date and time automatically but wasn't able to. I tried to do it manually but couldn't do it either. When I tried to skip this part and log into my iTunes account it said I had to set the date and time first. So it seems like I'm stuck in this loop. Any hints?
    Ricardo Ortiz

    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Why can't I set month,date and time on my imessage?

    Why can't I set month, date and time on my imessage?

    The way the date/time was displayed was changed in iOS7. There had been numerous complaints about not having a date/time stamp on all posts, so it was changed to display the time for all by sliding the post to the left. They left the date stamp to show differently. I couldn't tell you what it does for posts more than a week old, as I never save my messages that long.
    Meg's post provides for software where you could move the SMS to the computer and it should contain a full date/time stamp on it.

  • I just bought my apple tv and it says that it can't set the date and time? How do i fix this?

    I just bought my apple tv and it says that it can't set the date and time? How do i fix this?

    Welcome to the Apple Community.
    A number of users have encountered this problem, for existing users the problem has largely been resolved by restarting the Apple TV. However since you are a new user it would be wise to check that your settings are correct to begin with. Ensure the router allows access over port 123 (TCP) and that you are using the DNS settings provided by the ISP and not your own.

  • My Apple TV won't set the date and time! What can I do???

    My Apple TV won't set the date and time! What can I do???

    That means it's having trouble connecting to the network. Make sure location is set correctly. DNS should be set to automatic. Ensure router is up to date, reboot all devices. If on wifi try ethernet.

  • HOW DO I SET THE DATE AND TIME ON MY HP OFFICEJET 8600

    just bought the HP officejet 8600 all in one printer, and I cant seem to set the date and time for the fax portion of the printer, please help.

    Set the date and timeOn the control panel, touch the Right Arrow ( ), and then touch Setup ( ).Touch the Down Arrow ( ), and then touch Preferences .Touch Date and Time: , and then touch the Up and Down Arrows ( ) to set the month, day, and year.Touch Done , and then touch the Return Arrow ( ) to return to the Preferences menu.Set the language and country/regionIn the Preferences menu, touch Language .Touch your preferred language, and then touch Yes to confirm your choice. The product returns to the Preferences menu.On the Preferences menu, touch Country/Region , and then touch your specific country/region.Touch Yes to confirm your choice, and then touch the Home icon ( ) to return to the main menu.

  • Email syncs now say "Updated Mar 30", the day I upgraded to Lollipop 5.0.  The notification should read the date and time you updated email receiving.  Does anyone elsehave this problem?

    Email syncs now say "Updated Mar 30", the day I upgraded to Lollipop 5.0.  Two days later it is still saying Mar 30.  The notification should read the date and time you updated email receiving.  Does anyone else have this problem?  Is there a solution to this?

    We want to make sure your phone is in working order Mb_in_NC. I know it can be difficult when you see different times. What is your make/model of your device? When did it start? Do you have a different time on any other applications?
    AmberF_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • How do I programatically set the date and time of my FP-2000 in LabVIEW RT?

    I checked out the following knowledgebase document which has a tool for setting the system time, but I also need to set the date:
    http://zone.ni.com/devzone/explprog.nsf/ 6c163603265406328625682a006ed37d/ 37175dbc3696a1ac86256a850051097d?OpenDoc ument
    How can I do this?
    -Jim

    That is great, Steven. I also found a solution using GetSystemTime and SetSystemTime which are functions in kernel32.dll that get and set the system date-time. This function call worked on the FP-2000 that I have and should work on RT-Embeded systes, as well.
    -Jim
    Attachments:
    GetSystemTime.vi ‏16 KB
    SetSystemTime.vi ‏14 KB

Maybe you are looking for