HT1807 How can I turn off everything, data, roaming, text messages, and phone calls, without shutting off my Wifi aswell?

I am travelling and I would still like to get Wifi on my phone but i have no set up plan for anything else so I do not want the charges. Is there a way to turn everything off except for my connection to different Wifis?

turn airplane mode on and then turn wifi back on with airplane mode on

Similar Messages

  • Text messages and phone calls from March 2012 to date are missing after activating iphone5

    text messages and phone calls from March 2012 to date are missing after activating iphone5. I backed up my 4 before activating my 5. Can i retrieve them somehow?

    i would not want to bet on nokia ever releasing a patch or update in the software to allow this function on this particular phone.
    if you look at nokia phones over the years, they have added functionality like this across a wide range all at once, take for example timed profiles on symbian phones. these have only just been phased in.
    i do not think it is a development cop out, more along the lines that nokia is a huge company and as such would have a huge effor in market research. if they didnt pick this out through their market researc, why spend the money adding it?
    the comment on annoyance is entirely personal to me, as it is important to you - you may want to consider moving to a symbian (series 60) based handset as these give you a lot of expansion for this sort of need.

  • Me and my brother share the same itunes. when we downloaded the IOS6 update he didnt change his phone number. now he receives all my text messages and phone calls? How do i fix this?

    Help me fix this

    Try going to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at".   If that doesn't work, you'll have to tap the ID, sign out, then sign back in with a different Apple ID for iMessage.

  • How can we change the colour of the text message?, How can we change the colour of the text message?

    How can we change the color of the text message and the bar code?

    Text message where?
    In response, I do not know of any setting that allows one to change the things you indicated.
    Barry

  • Mavericks: How can you deactivate scrolling like you could with Mountain Lion? I mean shut off, nothing else.

    Mavericks, mouse: How can you deactivate scrolling like you could with Mountain Lion? I mean shut off, nothing else, and I need it for photoshop. PS: Apple people: Mavericks is not satisfying - why turn good things bad? Urs Keller, Switzerland

    Open System Preferences then type scrolling in the search field top right corner of that window.
    There may be more than one way to do this for you.

  • I am trying to add my sons email address to our family apple id but it says that it already associated with another apple id. How can i find out what the apple id is and take his email address off that one?

    I am trying to add my sons email address to our family apple id but it says that it already associated with another apple id. How can i find out what the apple id is and take his email address off that one?

    You may be able to find your Apple ID at Look up your old and forgotten Apple ID

  • How can I get a time stamp on text message without turning on "read"???

    How can I get a time stamp on text message iPhone 5 IOS 7? (Without having to send read receipt)

    You can make the "Visit Date" column visible in the Bookmarks Manager (Library) via "Views > Show Columns"
    * Bookmarks > Organize Bookmarks
    *http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox

  • How can i turn a part of a text of  a JTextArea into bold??

    how can i turn a part of a text of a JTextArea into bold?? I mean i just want the selected text to do so and not all of the content of the JTextArea.
    Is there a way to do so??
    If not, is there another component that i can use to do so??
    [Rik]

    Use a JTextPane. Here's an example to get you started:
    http://forum.java.sun.com/thread.jsp?forum=57&thread=342068

  • How can I add multiple contacts to a text message on a droid bionic

    How can I add multiple contacts to a text message on a droid bionic?

    DH
    I was thinking that if he wanted to create multiple keyframes he might be creating a repeated effect rather than manipulating values that are shot specific - like creating an oscillation or some repeated step effect.  If he was creating keyframes specific to his content he'd probably not look for a way to do it "quickly" since each keyframe would require manipulation of specific values. 
    So my thought was to generate the series of keyframes on a dummy clip created for this specific purpose, copy the clip, paste attributes (maybe turn off "Scale Attribute Times") and add bunches of keyframes at once. 
    Still, you're right, it's tough to divine the intent of someone very new to FCP.  His question could be based on a misunderstanding about the use of keyframes.
    P

  • How can I set a signature on my text messages?

    How can I set a signature on my text messages?

    I have iphone4, recently changed my phone number.  Prior to the change all of my outgoing sms showed my name and phone number.  Since I changed the number have not been able to show the new number on outgoing texts. So I don't understand why my number showed before but unable to add it now.....?
    I lost a lot of data when I changed the number so I performed a back-up restore, which restored the data I lost.  But now my text messages are showing my old phone number.....!!
    Any idea how I can change so the new number is displayed?
    I use texting a lot more than I do email with my phone. 

  • How do I turn the volume up for text messages on Iphone4?

    how do I turn the volume up for text messages on Iphone4?

    There are two ways.
    1. Turn up the volume to max with the buttons on the side of the phone.
    2. Go to Settings > Sounds > Turn the slider under Ringer and alerts all the way to the right.
    Good luck.

  • How to I get my contact names to show up in messages and phone calls?

    My contact names have stopped showing up in messages and phone calls.  How do I fix this problem?

    Did you change your region settings recently? (if so, set it back to the region you had before)
    Have you checked to see if your contacts are syncing properly in iCloud? (do the contacts match what you have online?)

  • How can I turn on "speak" on highlighted text on iPhone 3GS?

    How can I add "speak" option to highlighted text on iPhone 3GS?

    AustinReyes wrote:
    I just need to locate my iPhone but my location services are off, is there any way to turn them on from another device?
    Sorry... No.
    Lost or Stolen iOS device  >  http://support.apple.com/kb/HT5668

  • How can I delete all the data in Mac pro and install the latest version of OSX Mavericks?

    Hi,
    I want to know why my mac become slow and so, I want to data and system and I want to install the latest version OS X Mcvericks. How can I do?
    Thanks

    Open the App Store app:
    And, choose Mavericks:
    Then download and run the installer. Tip: It would be a good idea to quit the installer before proceding with the install, so that you can copy it or move it to location outside of your Applications folder. That way the installer won't be deleted after you run it.
    If you don't have a backup of your current Lion partition, the only way that you can do a clean install is to erase that partition, thus losing all of your data.

  • How can I embed Variant To Data in a subVI and pass in the Type input?

    If I use Create Control on the Type input of Variant To Data, I get an undefined type error unless I insert a control of a specific type into the cluster control that was created. This seems to prevent passing a parameter into a subVI for this purpose.

    > I'm interested in extending the functionality
    > of Variant to Data, such as using it or not based
    > on an additional input. Clearly, LabVIEW will not
    > allow this with the current design.
    I do not see what you mean by "using it or not based on an additional input". What would the output of this function be, if it were "not used"? What exactly are you trying to do?
    Personally, I have long wanted a polymorphic data type. If a polymorphic control were connected to a VI's connector pane, it would be defined by the calling VI. Once a calling VI wired a data-type to a polymorphic input of a subVI the type would propogate into the subVI.
    > As to the existing documentation on the type data
    > returned by Flatten to String, I find it
    rather
    > incomplete.
    With the release of LabVIEW 7, NI has updated App Note 154 to include some more data types (and subtypes). If you haven't seen this, I suggest you take a look.
    > I have created many types that cannot be decoded
    > using the available documentation. This alone,
    > makes an analytical solution difficult.
    Do you mean compound data types like clusters and arrays? Almost all data types can be decoded just fine with the available documentation. The only types that are not very straight-forward are the waveform data type, refnums, and typedefs. If you give me an example, perhaps I can help.
    > Adding
    > LabVIEW version dependency really makes this
    > solution fragile.
    I don't agree. LabVIEW may add new types in new versions of LabVIEW, but fundamentally the typecodes and structure of flattened LabVIEW data types have not changed at all (even though NI does reserve the right to change this in future releases of LabVIEW). Do have specific examples of t
    his?
    Cheers,
    -Jim

Maybe you are looking for