HT1918 my credit card expired, so it tells me i have to update my payment method, in which i do since all i have to do is change the exp date and the 3 digit security number. upon doing this i just get a link to this page "contact apple support"

I am currently deployed near russia, we have internet and everything else works, but when i loaded my redeem card to my acct (which took just fine) it tells me to update my information. upon trying to do this it tells me to go to support page......that does not help, i just want to use the money that i loaded on my acct.

If you are getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Similar Messages

TS1702 Hi, I'm experiencing a problem with app I've just purchased from iTunes, I have tried every piece of advice from the "iOS: Troubleshooting applications purchased from the App Store" and still nothing is working. I would like to get my refund on thi

Hi, My name is Bheki Yende
I'm experiencing a problem with an app I've just purchased from iTunes, I have tried every piece of advice from the "iOS: Troubleshooting applications purchased from the App Store" and still nothing is working. I would like to get my refund on this pls.
This is an inconvenience, I don't understand why I have to contact the developer for a faulty product in your store.
I've paid iTunes to get this, so iTunes must fix this problem for me or give my money back.
Thanks

This is a user forum, you are not speaking to Apple here.
You will need to contact iTunes support here, regarding this issue. They will usually respond within 24 hours.

The invoice date and the paymant date showing the same

hi sap techies
i am facing a typical problem the invoice date and the payment date is showing the same in fbl5n.the payment terms are set for 30 days that means that the payment date should be 30 days from the invoice date but in fb03 the system shows invoice date and the payment due date to be the same.
please help
kind regards

Hi,
Payment terms are calculacted either on
- Document Date
- Posting Date or
- Entry Date
You must have chosen document date in the parameters for payment term and now you must be comparing on posting date.
Check what is the parameter in payment terms.
Also check the payment terms in the document.
Good Luck!
SAP Solutioning

Get the reqmt date and the reqmt and the dep reqmt qty

Hi,
From whcih table we can get the reqmt date and the reqmt and the dep reqmt qty .i checked mdtb. it only show the recipt data and qty.

Try using PBIM and PBED tables.
Regards
Ratan

Regarding the Master Data and the MRP maintained.

Hi,
i have one query,my client has 4 plant,for manufacturing a product there are 10 operation.The 4 operation is taking on Plant A.The 5th and 5th operation is is in Plant B.The 7th operation is at Sub-contractor to vendor and return back to Plant A,and the remining operation is at Plant A.
So what are the Master Data and MRP we have mainted for that?
Please revert back.
Thanks,
Mohit

Dear,
Sub-contracting is carried out for 2 types-
1) Operation SubContracting & 2) Material SubContracting
You need to activate SubCon key (30) in MRP2 for the material which you want to send.
When you run MRP, it will check the system, if you have the stock as per requirement in the system. If the adequate stock is unavailable it will create PR, which you will need to convert in SubCon Purchase Order.
Operation SubContracting
You have to activate External Processing
"X" (T Code OPJ8) in PP01 Control key for that operation which u want to do externally
In the routing for the externally processed operation enter the control key as PP02
In the operation details screen in the External Processing tab enable the check box subcontracting
Enter thr info rec no and other details and save.
Thru ME58 Convert purchase requisition to purchase order Thru ME2O Send the material to subcontractor. .Migo receive the material from subcontractor (check theMovement type-541)
Hope it will help you.
Regards,
R.Brahmankar

Query to find the difference between the last date and the second to the last date

Hi all,
Hope all is well.
I am working on the following problem because I am trying to improve my MS SQL skills. But I am stuck at the moment and I wonder if you could provide some assistance please. Here is the issue:
Table 1: Dividends
divId
ExDate
RecordDate
PayDate
Amount
Yield
symId
1
2013-02-19
2013-02-21
2013-03-14
0.23
0.00000
3930
2
2012-11-13
2012-11-15
2012-12-13
0.23
0.00849
3930
3
2012-08-14
2012-08-16
2012-09-13
0.20
0.00664
3930
4
2012-05-15
2012-05-17
2012-06-14
0.20
0.00662
3930
5
2012-02-14
2012-02-16
2012-03-08
0.20
0.00661
3930
6
2011-11-15
2011-11-17
2011-12-08
0.20
0.00748
3930
7
2011-08-16
2011-08-18
2011-09-08
0.16
0.00631
3930
8
2011-05-17
2011-05-19
2011-06-09
0.16
0.00653
3930
9
2011-02-15
2011-02-17
2011-03-10
0.16
0.00594
3930
10
2010-11-16
2010-11-18
2010-12-09
0.16
0.00620
3930
11
2010-08-17
2010-08-19
2010-09-09
0.13
0.00526
3930
12
2010-05-18
2010-05-20
2010-06-10
0.13
0.00455
3930
13
2010-02-16
2010-02-18
2010-03-11
0.13
0.00459
3930
Table 2: Tickers
symId
Symbol
Name
Sector
Industry
1
A
Agilent Technologies Inc.
Technology
Scientific & Technical Instruments
2
AA
Alcoa, Inc.
Basic Materials
Aluminum
3
AACC
Asset Acceptance Capital Corp.
Financial
Credit Services
4
AADR
WCM/BNY Mellon Focused Growth ADR ETF
Financial
Exchange Traded Fund
5
AAIT
iShares MSCI AC Asia Information Tech
Financial
Exchange Traded Fund
6
AAME
Atlantic American Corp.
Financial
Life Insurance
7
AAN
Aaron's, Inc.
Services
Rental & Leasing Services
8
AAON
AAON Inc.
Industrial Goods
General Building Materials
9
AAP
Advance Auto Parts Inc.
Services
Auto Parts Stores
10
AAPL
Apple Inc.
Technology
Personal Computers
11
AAT
American Assets Trust, Inc.
Financial
REIT - Office
12
AAU
Almaden Minerals Ltd.
Basic Materials
Industrial Metals & Minerals
I am trying to check the last date (i.e. max date) and also check the penultimate date (i.e. the second to the last date). And then find the difference between the two (i.e. last date minus penultimate
date).
I would like to do that for each of the companies listed in Table 2: Tickers. I am able to do it for just one company (MSFT) using the queries below:
SELECT
[First] = MIN(ExDate),
[Last] = MAX(ExDate),
[Diff] = DATEDIFF(DAY, MIN(ExDate), MAX(ExDate))
FROM (
SELECT TOP 2 Dividends.ExDate
FROM Dividends, Tickers
WHERE Dividends.symId=Tickers.symId
AND Tickers.Symbol='MSFT'
ORDER BY ExDate DESC
) AS X
Outputs the following result:
First
Last
Diff
2012-11-13
2013-02-19
98
But what I would like instead is to be able to output something like this:
Symbol
First
Last
Diff
MSFT
2012-11-13
2013-02-19
98
AAN
2012-11-13
2012-12-14
1
X
2012-11-13
2012-12-14
1
Can anyone please let me know what do I need to add on my query in order to achieve the desired output?
Any help would be greatly appreciated.
Thanks in advance.

Could you try this?
create table Ticker (SymbolId int identity primary key, Symbol varchar(4))
insert into Ticker (Symbol) values ('MSFT'), ('ORCL'), ('GOOG')
create table Dividend (DividendId int identity, SymbolId int constraint FK_Dividend foreign key references Ticker(SymbolId), ExDate datetime, Amount decimal(18,4))
insert into Dividend (SymbolId, ExDate, Amount) values
(1, '2012-10-1', 10),
(1, '2012-10-3', 1),
(1, '2012-10-7', 7),
(1, '2012-10-12', 2),
(1, '2012-10-23', 8),
(1, '2012-10-30', 5),
(2, '2012-10-1', 10),
(2, '2012-10-6', 1),
(2, '2012-10-29', 7),
(3, '2012-10-1', 22),
(3, '2012-10-3', 21),
(3, '2012-10-7', 3),
(3, '2012-10-12', 9)
WITH cte
AS (SELECT t.Symbol,
d.ExDate,
d.Amount,
ROW_NUMBER()
OVER (
partition BY Symbol
ORDER BY ExDate DESC) AS rownum
FROM Ticker AS t
INNER JOIN Dividend AS d
ON t.SymbolId = d.SymbolId),
ctedate
AS (SELECT Symbol,
[1] AS maxdate,
[2] AS penultimatedate
FROM cte
PIVOT( MIN(ExDate)
FOR RowNum IN ([1],
[2]) ) AS pvtquery),
cteamount
AS (SELECT Symbol,
[1] AS maxdateamount,
[2] AS penultimatedateamount
FROM cte
PIVOT( MIN(Amount)
FOR RowNum IN ([1],
[2]) ) AS pvtquery)
SELECT d.Symbol,
MIN(MaxDate) AS maxdate,
MIN(penultimatedate) AS penultimatedate,
DATEDIFF(d, MIN(penultimatedate), MIN(MaxDate)) AS numberofdays,
MIN(MaxDateAmount) AS maxdateamount,
MIN(penultimatedateAmount) AS penultimatedateamount,
MIN(MaxDateAmount) - MIN(penultimatedateAmount) AS delta
FROM ctedate AS d
INNER JOIN cteamount AS a
ON d.Symbol = a.symbol
GROUP BY d.Symbol
ORDER BY d.Symbol
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers.
Thanks!
Aalam | Blog (http://aalamrangi.wordpress.com)

Conflict between the saved data and the sampling rate and samples to read using PXI 6070e

Hello, I am using PXI 6070e to read an analog voltage. I was sampling at 6.6 MHz and the samples to read were 10. So, that means it should sample 10 points every 1.5 um. The x-axis of the graph on the control panel was showing ns and us scale, which I think because of the fast sampling and acquiring data. I use "write to measurement file" block to save the data. However, the data was saved every 0.4 second and as 35 points data at the beginning of each cycle (e.g. 35 points at 0.4 sec and 35 at 0.8 sec, and so on) and there was no data in between. Can anyone help me how there are 35 reading points every cycle? I could not find the relation between the sampling rate and samples to read, to 35 points every 0.4 second!
Another thing, do I need to add a filter after acquiring the data (after the DAQ assistant block)? Is there anti-aliasing filter is built in PXI 6070e?
Thanks for the help in advance,
Alaeddin

I'm not seeing anything that points to this issue. Your DAQ is set to continuous acquire. I'm not sure if this is really what you want because your DAQ buffer will keep overwriting. You probably just want to set to Read N Samples.
I'm not a fan of using the express VIs. And since you are writing to a TDMS file, I would use the Stream to TDMS option in DAQmx. If you use the LabVIEW Example Finder, search for "TDMS Log" for a list of some good examples.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Whats the relevance of the Transalation date in the BKPF table

Dear All,
Whats the relevance of Transalation date ( field name WWERT )in the BKPF table and what does it mean , since the translation date in a docuemnt which i was viewing is 03.01.2005 where as the document was created a couple of days back.where the posting date and the entry date si 24.10.2005
Thanks in adavance.
Cheers
Seshi.

Hi,
This is F1 Documentation for the field,
Short text
Translation date
Definition
Translation date for determining the exchange rate which is to be used for translation. The exchange rates are stored in the system.
Procedure
You do not need to enter a date unless the date in question is not the same as the document entry date.
This is the date that is used for determining currency exchange rates during currency conversion..
For example, if the accounting document was created from a billing document then vbrk-kurrf_dat is passed into bkpf-wwert. vbrk-kurrf_dat in turn is normally filled from billing date (vbrk-fkdat).
Sri
Message was edited by: Srikanth Pinnamaneni
Message was edited by: Srikanth Pinnamaneni

First Date of the Given date and month

Hi Evryone,
I want to extract first day of the given date.
For Ex: i aam giving date "30-jan-2013" but i want to show "01-jan-2013".
In Oracle, Trunc function behaving mentioned above. So i need appropriote function in HANA to get the FIRSTDATE....
I observed HANA Given last_date function but what about First_Date function? can i use it?
Regards,
Chandrakanth

Hi Chandrakanth,
Did you have a look on this blog:
SAP HANA: Get the First Date and the Last Date of Month from a Given Date | WuaWua
There is LAST_DAY in HANA but not FIRST_DAY.
Since last day of the month may vary but first day of the month will always be '01'. Hence they may not have added that function.
So either you can follow that approach in the blog or you can simply replace the day '01'.
Regards,
Krishna Tangudu

Printing the invoice date in the outgoing payment.

Hi Experts,
Please help me with this scenario.
I need to print the invoice date and the item description and also the due date of the invoice in an outgoing payment in PLD.
I think this can be done through wring a query in UDF through the formatted search.
Could anyone help me with an alternate solution or a step by step procedure for writing the query.
Your help is highly appreciated.
Thanks,
Hari Dharen

Hi,
Are you really wanting to have invoice date, item description and invoice due date or it is also including payment date and payment means ?
Here is the query:
SELECT distinct T1.[DocDate], T2.[Dscription],
T1.[DocDueDate] FROM VPM2 T0 INNER
JOIN OPCH T1 ON T0.DocEntry = T1.DocEntry
INNER JOIN PCH1 T2 ON
T1.DocEntry = T2.DocEntry
Let me know if you need to know other field.
Rgds,

My account has been "disabled" after my credit card expired. I updated it to buy the additional i cloud storage but now it won't let me do anything! help, please!

my credit card expired so my iCloud storage was deactivated. I updated my credit card and now it not only wont let me purchase more storage, but says my account has been deactivated. help, please!

Hi mamamuddpie,
If your Apple ID account has been disabled, follow the steps below to reset your password and gain access. There is a link in the article to the Apple ID Security team if you need help with this.
If your Apple ID has been locked - Apple Support
http://support.apple.com/en-us/HT204106
You might see one of these alerts:
“This Apple ID has been disabled for security reasons”
"You can't sign in because your account was disabled for security reasons"
"This Apple ID has been locked for security reasons"
If your Apple ID was locked, you can go to iForgot to unlock it with your existing password or reset your password. You can also click the Reset Password or Forgot Password button in the alert. Remember to type your full email address when you're asked to enter your Apple ID. For example, [email protected] or [email protected]. If you use two-step verification for Apple ID, you need to use your recovery key and a trusted device to regain access to your account.
If you can't reset your password and you don't use two-step verification, contact Apple Support. Update your password in iCloud settings
After you change your password, you might need to update it in iCloud settings on your devices.
iPhone, iPad, or iPod touch
Go to Settings > iCloud.
Tap Edit, if asked.
Type your new password and tap Done.
Mac
Go to Apple menu > System Preferences.
Click iCloud.
Click Sign Out.
Type your new password and click Sign In.
Windows
Choose Start > Control Panel.
Double-click iCloud.
Click Sign Out.
Type your new password and click Sign In.
Email
If you use an email app to get iCloud email, the app will ask you to enter your new password when you check for mail. If OS X Mail doesn't ask you for your password, check your Mail preferences. For any other mail app, check the app's documentation to get help changing your email password.Update other services, such as iTunes and FaceTime
If you use your Apple ID in the iTunes Store, App Store, iBooks Store, iMessage, Game Center, or FaceTime, you might need to update your password for those services.
iPhone, iPad, or iPod touch
Go to Settings and tap the service.
Tap your Apple ID. For iMessage, tap Send & Receive and then tap your Apple ID.
Tap Sign Out.
Sign in with your Apple ID and your new password.
Mac or PC
If you try to sign in to the iTunes Store or Mac App Store, make a purchase, or update an app, you'll be asked to enter your password.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Dec 17, 2014
When you are able to access your account again, check to make sure your billing information has been updated.
Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support
http://support.apple.com/en-us/HT201266
I hope this information helps ....
- Judy

I can't find preferences for the notes app. and every once in awhile some of my notes just disappear at start up, I see the name and then it refreshes and they are gone, very annoying. Can anyone tell me why it does this and how to stop it? thanks

I can't find preferences for the notes app. and every once in awhile some of my notes just disappear at start up, I see the name and then it refreshes and they are gone, very annoying. Can anyone tell me why it does this and how to stop it? thanks

Hi again, I am on an iMac using OSX 10.7.5, I"ve taken screenshots to show you I think my settings are correct

I try to update or download apps but my credit card expired can I download a free app with out taking me to the payment method? Or I have to enter a new credit card ?

I try to update or download apps but my credit card expired can I download a free app with out taking me to the payment method? Or I have to enter a new credit card ?

you would have to enter your new credit card details

I was informed my credit card expired in February but was not informed until March. I logged in and updated the new expiration date but now Netflix has cancelled my subscribtion. What can I do?

Was informed by Itunes that my credit card expired in February but was not informed until March. I logged in and put new expiration date but now Netflix has cancelled my subscription. What's up with this?

Contact Netflix and ask them.
Contact iTunes customer support and ask them.
Why would you think anyone in these user to user support forums would be able to assist in this matter?

My order have a status: "Payment action required: We are unable to obtain an authorization for the credit card you provided. Please contact your card issuing bank. Please update your payment method to continue with this order". But i paid from AmEx.

My order have a status: "Payment action required: We are unable to obtain an authorization for the credit card you provided. Please contact your card issuing bank. Please update your payment method to continue with this order". But i paid from AmEx. And my money blocked when i see it in internet banking.

Have yuo contacted AmEx? From what you describe it seems like AmEx is blocking the charge.
You can contact iTunes if you want by:
Contact iTunes

HT1918 my credit card expired, so it tells me i have to update my payment method, in which i do since all i have to do is change the exp date and the 3 digit security number. upon doing this i just get a link to this page "contact apple support"

Similar Messages

Maybe you are looking for