HT1923 i have removed and reinstalled itunes at least three times and i still receive the same message, APSdaemon.exe fail to start because msvcr80.dll. i want to know how to get that file back so I can run tiunes again

I would like to know what i need to do to get the program to run again. i have not been able to locate a way to reinstall the program it says i need to have to run the program

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99436)

Similar Messages

I had itunes installed on my pc. I received notice to update. I started update but gpt the following message - this application failed to start because MSVCR80.dll was not found. Reinstalling may fix the problem. I uninstalled and have tried to reinstall

I already had itunes installed on my pc. I received an update and tried to install it. I got a message
This application failed to start because MSVCR80.dll was not found. Reinstalling may fix the problem.
I uninstalled itunes and tried to reinstall. itunes says it has installed but when I try to open itunes I get the same message.
How do I repair/sort out this error/fault
Thanks
David

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

TS3212 I tried to reinstall itunes on my PC and got "Service 'Apple moble Device' failed to start. APSDAEMON.exe failed to start because MSVCR80.dll not found

I installed the latest iTunes update from Apple on my PC. I then received an error when launching iTunes that I the "APSDAEMON.exe was unable to locate component. ...Failed to start because MSVCR80.dll was not found".
During install, I got a message that itunes install was complete nut then I got a message that "itunes not installed correctly. Error 7 (windows error 126). Another error message received was "service 'apple mobile device' failed to start. verify you have sufficient privileges to start system.services.
At this point, iTunes icon is on my desktop but cannot launch iTunes.
Need help!

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?

After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?

See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

HT1926 I tried to download the latest version of iTunes but now seem to have lost everything and can not access my library at all. Instead i keep on receiving the message 'Application has failed to start because MSVCR80.dll was not found. I cannot access

I tried to download the latest version of iTunes but failed half way through. It suggested that i reinstall we I tried. However, i now get this message which states "Application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem"
I have tried this but with no success. I have therefore found that I cannot access my iTunes library at all now.
What should I do.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99792)

HT6001 I have tried numerous time to update iTunes to Version 11.1.4. Each time it has failed. I get the message of "This application has failed to start because MSVCR80.dll was not found". Also I get a message of "Error 7". Advise please.

I have tried numerous time to update iTunes to version 11.1.4. It has failed every time. Now I can't even get into iTunes on my PC. The message I get is "This application has failed to start because MSVCR60.dll was not found. Re-installing the application may fix the problem." Okay. Which application? What steps are needed for this process?
Also, I get this message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)" Could someone please assist me in the steps necessary to remedy this issue. Thanks.

For many users at this point in time (iTunes 11.1.4.62) uninstalling iTunes alone is not enough and they may need to undertake further steps...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.

When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.

I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet: http://support.apple.com/kb/TS5376 it takes you through the process. WARNING - it takes a little time!
Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot again!
Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
Reboot!
Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck!

HT1926 I have just updated itunes on my pc (widows XP) to the latest version. When I try to open it i get an error message saying the application failed to start because MSVCR80.dll could not be found. Not sure how to resolve this. Have tried to reinstall

I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

HT1199 I updated Itunes on my PC and now when i try to open Itunes i get a error message saying "application failed to start because MSVCR80 was not found" then whenI close that pop up I get a error message saying "windows was not installed correctly Erro

I updated my itunes the other day and now it won't open I get error message saying "application failed to start because MSVCR80 was not found" When I close that window I get message stating Itunes was not installed correctly Error 7 Windows error 126. My PC is a Acer and I'm running Windows Visa. I tried to uninstall Itunes and reinstall it and get same message. Can anyone help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99659)

TS3212 I cannot get the new iTunes to start in Windows Vista. I get an error that states "This application has failed to start because MSVCR80.dll was not found". Reinstalling does not help.

I get an error that states "This application has failed to start because MSVCR80.dll was not found". Reinstalling does not help.I have tried removing iTunes and reinstalling, I have tried "repairing" option at reinstall, nothing seems to work.

Read this:
iTunes 11.1.4 for Windows - Unable to install or open - MSVCR80 issue

HT201210 I just updated my iTunes and now I get a message that the application has failed to start because MSVCR80.dll was not found. What happened and how do I fix this? I can't access any of my music now.

I just updated my iTunes and now I get a message that the application has failed to start because MSVCR80.dll was not found. What happened and how do I fix this? I can't access any of my music now.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99460)

Itunes update would not install due to an error, now itunes won't run and I get this message when I try to launch itunes: "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem"

itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

HT1349 When trying to run itunes on my PC, get this message. This application has failed to start because MSVCR80.dll was not found.

When trying to run itunes on my PC, I get this message. This application has failed to start because MSVCR80.dll was not found. Do you have any clues on a solution?

Welcome to Apple Support Communities
A solution is listed in the thread below.
It probably and other similar discussions appear in the More Like This window to the right of your question. The ones with a green check mark are questioned marked 'answered' by the original poster.
https://discussions.apple.com/message/24610401#24610401

Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I have re-installed, SO many times and I still cant open iTunes.

Hi Support,
I am becoming anxious because no matter what I try it doesnt seem to allow me to open itunes.
Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.
I have re-installed, SO many times and I still cant open iTunes.
Please help!!

Click here and follow the instructions.
(98888)

I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message. Cannot access app store or do updates.

I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message. Cannot access app store or do updates.

In what way are you receiving this message? It is very common to get an email telling you that your ID has been disabled, and asking you to confirm all your details so the sender can steal your identity online.....

HT1923 i have removed and reinstalled itunes at least three times and i still receive the same message, APSdaemon.exe fail to start because msvcr80.dll. i want to know how to get that file back so I can run tiunes again

Similar Messages

Maybe you are looking for