HT1976 no service

I have new I phone 5 it was working normally and I am so happy with it but suddenly it is stopping working it gave me no serves and searching for cellular network I have done all but still the same no service issue
1-update 6.0.2(10A551)
2-witching the phone on and off.
3- change SIM cared 3 time .
4-rest network setting
5- switch off and on
6-a restart, then a reset, then a restore

I allready did restore for 3 times... Same problem... Searching then no service, searching again, searching, no service... But when it says no service my sim is recognized because in that moment I am able to call ... But after 3 second says searching again... And so on... This **** drives me crazy!!!! There is someone else who got this problem?? Thank you :||

Similar Messages

HT1976 No service problem in my Iphone 5 and its new

I have a new ipohone 5 and allways have a no service problem

so contact your carrier. Maybe your SIM card is bad.

HT1976 Iphone 4s signal dropping to no service

My iphone 4s giving me no service
I have to restart phone every 5 min
When I restart i get full signal and after few second It start dropping and stop on 2 bar and after few more seconds it give no service.
What cloud be the issue ?
Its hardware (if its hardware what component I need to change or repair.
If its software then what is the solution.
I am in Pakistan and here we have no apple store or genius bar facilities.
Help me to solve the issue otherwise iphone is non useable at the moment.
I need quick reply from Apple team.

If you have tried a restore as new expecially in DFU mode you have done all the software troubleshooting neccesary this narrows it down into a hardware issue.
Apple does not recommend doing any repairs on your own because it will void your warranty however
You would be looking into repairing your Signal Antenna
Before doing this repair i would suggest contacting your carrier and having them reset your cellular network just in case
Good luck
Let me know how it goes

HT1976 Y have the problem with network 5.1.1 ...no services ??

Hello my name is costel end y have an iphone 4 ios 5.1.1 factory unlock end the last night appear on display "no service" end searching.... But nothing, what is hapening? Y make restore end nothing she dont work...please y want help

It seems that there is an issue with IOS 5.1.1
1) Charlie3012
Re: Updated to ios 5.1.1 and had no service since for least 6 hours now.
I had the same problem, the network provider had an issue with their network but after that was fixed, I still got the message "no service". I have an iPhone 4, no jailbreak, everything standard. What solved the problem for whatever reason was to remove the sim card and put it back in.
2) As suggested on another thread:
FarID0
Re: Updated to ios 5.1.1 and had no service since for least 6 hours now.
hey, he is alive!
i've turned on reseted iphone, waited 10 minutes, pulled out sim card, iphone says "no sim card" and pulled sim in, waited search stage and vuola!
Hope it will help
3) Go to your carriers' shop and change your SIM card.

HT1976 My 4s keeps saying no service and nothing i do works... any ideas?

I tried everything!
Hard rest
reseting
restoring
turning off/on airplane mode
turing it on and off
everything!

Re-set Network Settings
Restore as a NEW device
Get a replacement SIM from your carrier.
Pay your bill.
Make sure you're in an area where there is cellular coverage.
... not quite everything.

Error while calling a select esb service

javax.resource.ResourceException: RollbackException: Transaction has been marked for rollback:
I encounter the above error while executing a synchronous bpel process, that invokes an esb db select service to fetch a value from the db.
the details available for the error are:
An unhandled exception has been thrown in the ESB system. The exception reported is: "java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 0 at java.util.Vector.get(Vector.java:710) at oracle.tip.esb.server.common.wsif.WSIFInvoker.readResponseHeader(Unknown Source) at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(Unknown Source) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(Unknown Source) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(Unknown Source) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source) at oracle.tip.esb.wsif.WSIFOperation_ESB.executeRequestResponseOperation(Unknown Source) at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:431) at com.collaxa.cube.ws.WSInvocationManager.invoke2(WSInvocationManager.java:353) at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:192) at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:733) at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:368) at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:197) at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3266) at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1696) at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75) at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:184) at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:269) at com.collaxa.cube.engine.CubeE
Please suggest
thanx
AJ

Done That,
Thanx a ton Dave, it worked.
So I am finally moving on :-)
Just one question Dave, I happened to work on the Beta release of this version too, the problem was not there. How come we have been able to get it in dev preview.

Error while invoking a WS-Security secured web service from Oracle BPEL..

Hi ,
We are facing some error while invoking a WS-Security secured web service from our BPEL Process on the windows platform(SOA 10.1.3.3.0).
For the BPEL process we are following the same steps as given in an AMIS blog : - [http://technology.amis.nl/blog/1607/how-to-call-a-ws-security-secured-web-service-from-oracle-bpel]
but sttill,after deploying it and passing values in it,we are getting the following error on the console :-
“Header [http://schemas.xmlsoap.org/ws/2004/08/addressing:Action] for ultimate recipient is required but not present in the message”
Any pointers in this regard will be highly appreciated.
Thanks,
Saurabh

Hi James,
Thanks for the quick reply.
We've tried to call that web service from an HTML designed in Visual Studios with the same username and password and its working fine.
But on the BPEL console, we are getting the error as mentioned.
Also if you can tell me how to set the user name and password in the header of the parter link.I could not find how to do it.
Thanks,
Saurabh

Necessary Fields For Creation of Service PO of Order Type Relaese Order.

Dear Guru,
I have encountered an issue which i am trying to resolve...
My this requirment will seem little okward the way i am asking but i have no way...
The issue is I have to create a Service PO of Order type Release order (RO) using BAPI Function Module .BAPI_PO_CREATE1.
The service PO should be of multiple Item and services for particular line item should be multiple.
When I am creating this using ME21 or ME21N i am facing no issue.
But when i am using BAPI Function Module .BAPI_PO_CREATE1
i am getting following errors ;; The error which i am getting as below
T ID                   NUM MESSAGE
E BAPI                001 No instance of object type PurchaseOrder has been created. External reference:
E MEPO              000 Purchase order still contains faulty items
E SE                   029 Please maintain services or limits
E SE                   140 Service HIRING OF LCD: please specify unit of measure
But I am failing to findout in which field services or limits and unit of measurement have to maintain.
What are the necessary fields have to pass in Bapi import parameter and the table i am unable to findout.
Please show some way how to resolve this or give me some guideline to resolve this
Dear Moderator request your kind intervane to move this qurry into correct forum if i have asked this in wrong forum
Thanks and regards
saifur rahaman

Hi Saifur
Can you please elaborate how did you resolve the issue we are also facing same problem when we are trying to create the PO for service items through SRM it is throwing same error while creating the PO in SAP.
Email Id : [email protected]
Thank you in advance!!
Regards
Deepika

Logical Systems in Business Services

Hi
In Business Service creation, for Adapter Specific Identifiers, the parameter for the Logical System. It is only possible to assign one logical system to one Business Service ?.
i.e. to do
MyBusServ1, Z_LS_1
MyBusServ2, Z_LS_1
is not possible ?
When trying to assign Z_LS_1 to MyBusServ2 I get the error that Z_LS_1 is already assigned. Is there a way to circumvent ?, I do not want to create two logical systems in R/3 as the IDOCS types submitted by the Business Services are the same.
Thanks
Damien

Thanks for the replies
Sarvesh - The Business service is the sender of the information \ IDOC. If I remove the Adapter specific config then how will XI know what Logical system to apply to the IDOC ?.
Jaishankar - I am creating two IDOC's in SAP. MATMAS and PORDCR. The input file are coming from two different source systems. lets say sys1 and sys2. Both of thse for clarity are created in my scenario as Business Services. sys 1 creates MATMAS and PORDCR IDOC's int he syatem, sys2 creates PORDCR IDOC's in the system. As sys1 and sys2 are related in that they created the IDOC's as part od the same project then I would like to collect in the same partner profile in SAP e.g. Partner Profile ZPP_IDOC with IDOC types MATMAS PORDCR that serve as input for both systems. Logically I would assume that I can assing the logical system ZPP_IDOC to both the adapter specific parameter in both sys1 and sys2.
Thanks
Damien

Not Able To View Data in Web Service Model

Hi ,
   I m trying to view a table using web service model.
   When i write the same code for binding it to context , i m able to view its data.
   But not so while using Web Service Model(not adaptive web service model).
   The code is:
         Request_ZMANAGE_MAKT_ZMANAGE_ZMAKT object1 =new Request_ZMANAGE_MAKT_ZMANAGE_ZMAKT();
   wdContext.nodeRequest_ZMANAGE_MAKT_ZMANAGE_ZMAKT().bind(object1);
   object1.setResponse(new Response_ZMANAGE_MAKT_ZMANAGE_ZMAKT());
CAn anybody plz solve my problem.
Thanks..
Regards,
Ankita

Hi,
I have no problem with item :P15_EV_LCL this is having a value my probem here is i am using java script to display the value in different color based on the condtion case
eg:
select
case
TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2)
= :P15_EV_LCL
then
span style="background-color:lightgreen"
|| TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
else
span style="background-color:yellow"
|| TRUNC(
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
end "Effort"
from actuals Z
If i dont use this <Span style="Background-color:color"> i am able to generate data in excel sheet if i use this color coding i am not able to get data in spread sheet.
Please suggest
Thanks
Sudhir
Edited by: Sudhir_N on Mar 23, 2009 10:00 PM

Unable to capture return values in web services api

At the time of login to web services if my server is down ,
it returns following error :
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
        at java.lang.String.substring(String.java:1438)
        at java.lang.String.substring(String.java:1411)
I want to capture this error so that i can try another server to login. how do i capture this error
Another place where i want to capture the return Value is when i look for a report on the server
rh = boBIPlatform.get("path://InfoObjects/Root Folder/"src_folder"/" + reportName +
                           "@SI_SCHEDULEINFO,SI_PROCESSINFO" ,oGetOptions);
oInfoObjects = rh.getInfoObjects();
CrystalReport = (CrystalReport)oInfoObjects.getInfoObject(0);
Here if the report is not there on the server , it returns a null handler exception.
but if i try catching it by checking my responsehandler is null like rh == null it does not catch it.
Any help will be appreciated
thanks
Rakesh Gupta

Ted : i have two cases
1)   server = server_st.nextToken();
    providerURL = "http://"server"/dswsbobje/services";
    sessConnURL = new URL(providerURL + "/session");
   Connection boConnection = new Connection(sessConnURL);
   Session boSession = new Session(boConnection);
EnterpriseCredential boEnterpriseCredential = new    EnterpriseCredential();
              boEnterpriseCredential.setLogin(userid);
boEnterpriseCredential.setPassword(pwd);
boEnterpriseCredential.setAuthType(auth);
SessionInfo boSI = boSession.login(boEnterpriseCredential);
I have got a list of servers running web servcies stored in my tokens. when i pass the first server name say " test:8080" and that server is down , i want to catch somewhere in the code above that it did not get the connection so that i can loop back and try with the second server say test1:8080
This is for failover purposes.
at present when i was trying to capture return value of boSI it breaks giving the error
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1438)
at java.lang.String.substring(String.java:1411)
2nd case :
I am geeting reports from the server and scheduling them:
i run the following code which works fine if reports is there
rh = boBIPlatform.get("path://InfoObjects/Root Folder/"src_folder"/" + reportName +
"@SI_SCHEDULEINFO,SI_PROCESSINFO" ,oGetOptions);
oInfoObjects = rh.getInfoObjects();
CrystalReport = (CrystalReport)oInfoObjects.getInfoObject(0);
Here if the report is not there on the server then i should be able to catch from the response handle rh that it has got a null value.
but rh does not return a null value
the code ultimately throws a null handle at the following line
CrystalReport = (CrystalReport)oInfoObjects.getInfoObject(0);
i am not able to catch the null value there also.
hope you got my issue.

Adobe Cloud Services

How comes Adobe Cloud services is not available to people in Africa?

There is a special sub forum for iOs Reader:
http://forums.adobe.com/community/adobe_reader_forums/ios?view=discussions

Service Desk - Expert Mode - Not all actions are available

Dear SAP colleagues,
I have just implemented the Service Desk in our SOLMAN system.
1. I choose Incident Management
2. I click on Queries
3. I click on a ticket (Transaction ID).
4. I edit the message
5. When I select Actions, I only have the 4 following options :
    - Send Message to SAP
    - Maintain SAP Logon Data
    - Display SAP Action Log
    - Update SAP Message
When I consult some demos, there are many differents options available in Actions menu, as, for example :
- Open System fro SAP
- Confirm Message to SAP
- E-Mail to Message Creator (Mail)
- Print Message
- Create Change Document
- Call Solution Manager Diagnostics.
Is it due to an missing authorizations (roles and profiles) ?
Thanks for your input.
Best regards
CP2009

Dear Rajeev,
First of all, thanks for your input.
I have choosen SIVA when I have activated BC Sets.
Should I activate also BC Sets for transaction type SLFN ?
1. I have started SPPFCADM and follow your recommandations.
2. I have choosen CRM_ORDER
3. I have then click on "Condition Configuration (Transportable Conditions)
4. There are many entries related to the Support and Service Desk
Example : Support Desk Message Action Profile
I have 5 actions defined -
Action 01 : Send Message to Processor
Action 02 : Create/Change Basis Message from CRM Procedure
Action 03 : Send Notification to SAP
Action 04 : Update Message from SAP
Action 05 : Confirm Message to SAP
I have activate BC Sets for transaction type SIVA, not for SLFN.
Best regards
CP2009

How to log in to Service Desk to create sample message to SAP?

Dear all,
How to log in to Service Desk under my Solution Manager server to create sample message to SAP under Component: SV-SMG-SUP?
Regards
GN

Hi GN,
You have different options to create messages in test component SV-SMG-SUP-TST:
1. if you are on 7.1 you can create message using CRM_UI
2. If you are using lower vrsion then either you can create message using Workcenter or using transaction NOTIF_CREATE or using menu --> Help --> Create support message.
Thanks
Regards,
Vikram

How to allow access to web service running under ApplicationPoolIdentity

Hi All,
I have a WCF web service hosted in IIS 7 (or maybe 7.5, whichever comes with Windows server 2008 R2) using DefaultAppPool running under ApplicationPoolIdentity per Microsoft's recommendation. The web service needs to call a stored procedure to insert data
to a db. The web server is on a different VM than the database server. The db server is running SQL 2008 R2. Both VMs run Windows server 2008 R2.
When the web service tries to connect to db, it encounters this exception:
Exception in InsertToDb()System.Data.SqlClient.SqlException (0x80131904): Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
Here's the connection string in web.config:
Application Name=somewebservice;Server=somewebserver;Integrated Security=SSPI;Database=somedatabase;Connection Timeout=60"
How should I configure SQL security to make this work?
Thanks in advanced.

Thanks for the link Dan. Maybe I'm the one who cause the confusion :)
If I understand you(and Erland) correctly, you suggest using a custom, domain account for application pool identity. However, if we do that, our IT will need to maintain those accounts, and they don't want that. So I'm choosing a built-in account called
ApplicationPoolIdentity as the application pool identity, but it's not working. Network Service, on the other hand, works, but my boss wants us to follow MS's best practice.
What's puzzling is that according to this: http://learn.iis.net/page.aspx/624/application-pool-identities/, both Network Service and ApplicationPoolIdentity uses machine account to access network resource (like db in this case), but in my case, Network Service
works, but not ApplicationPoolIdentity.
Hallo Stephen,
with respect - it seems to me that only idiots are working at your IT ;)... It is absolutely useful to work with "service accounts" created within the domain. That's the only way to manage and control accounts!
If you want to "pass through" the identity of the web user (SSO) you have to check whether the app pool is set to "allow impersonate". As far as I understand the ApplicationPoolIdentity-function the app pool will create a unique user named as the service.
I assume that will not work with the connection to the sql server because this user is unknown.
Local Service will not work because it's restriction is located to the local machine.
Network Service will work because access to network resources will be available.
So my recommendation is to use a dedicated service account or impersonation:
http://msdn.microsoft.com/en-us/library/xh507fc5.aspx
Uwe Ricken
MCITP Database Administrator 2005
MCITP Database Administrator 2008
MCITS Microsoft SQL Server 2008, Database Development
db Berater GmbH
http://www-db-berater.de

HT1976 no service

Similar Messages

Maybe you are looking for