HT201210 I have a iphone 4 and while it was updating it went into the connect to itunes and will not update to come out of it. can anyone help me "what to do?
I have a iphone 4 and it will not come out of the connect to iphone mode. I have connected to itunes and it will go about 3/4 of the way and say the phone cannot be updated. It was installing and update when this happened. can anyone help?
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you should be able to restore to factory settings.
Similar Messages
-
Have an ipad 2 and have bought the camera connection kit to use with my flip ultra. However when try to connect ot says there is not enough power to support accessory. Can anyone help please?
If you have ios 5.1.1 the output power is 100ma, on the iOS 5.0.1 the power output is 500ma! This may be the cause?
-
i did a master reset on my sprint iphone 4 and i do not know what steps to take to get the phone to where i can connect to wifi after putting in the language and country... please help
Connect it to your computer via the supplied sync cable and restore.
-
I have money on my itunes account but it will not let me make a purchase.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Edit > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Edit > Preferences > Privacy > Cookies: "Show Cookies" -
hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regards
Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.
-
please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.
Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H. -
I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?
And I cant work out why all of my pictures are not diplaying in iphoto?
Is this iPhoto on your Mac? Are you referring to the photos that were in your iPhoto LIbrary prior to the upgrade to iPhoto 11? If so then apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If that's not what you're referring to then you should describe what is happening in more detail. Remember we can't see your Mac or your iPhone so need detailed and accurate descriptions of what you're experiencing.
Also we need infomartion like do you have an iCloud account and are you logged into it on all of your devices, iPhoto and Mac? do you have Photo Stream enabled on both.
OT -
I went to do the latest update on my iphone 4s, and it said to connect to itunes so I did and continued to click restore and then it updated my phone through itunes. Then after about 40 minutes of it updating it still has the connect to itunes screen on. It won't go away and I have tried restarting and turning off my phone various ways various times. I don't know what to do!
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download -
I have Photoshop CS6 Extended Students and Teachers Edition. when I go into the Filter/Oil paint and try to use Oil Paint a notice comes up "This feature requires graphics processor acceleration. Please Check Performance Preferences and verify that "Use Graphics Processor" is enabled. When I go into Performance Preferences I get a notice "No GPU available with Photoshop Standard. Is there any way I can add this feature to my Photoshop either by purchasing an addition or downloading something?
Does you display adapter have a supported GPU with at least 512MB of Vram? And do you have the latest device drivers install with Open GL support. Use CS6 menu Help>System Info... use its copy button and paste the information in here.
-
How do I gift a playlist made of half my own songs and half chosen songs to be purchased? I have tried to find the 'arrow to the right' of the playlist when I select it but cannot see this at all! Can anyone help?
This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Regards. -
Hi I am using iphone 4, since last few days i am facing problem in touch screen at times it doesn’t work at all for 5-10 mins and then it works out itself. Can anyone pls suggest what the problem is and how it can be sorted out?
Did you recently updated to 7.0.4? Even for me same also issues.
-
I am having trouble fading out a song at the end of an iMovie. Also, the volume of the song is too high...I would like it to be more background music? I have tried everything and can't figure it out...Can anyone help me, Please!!??
Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.
-
My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours hoping it would reload and work. No luck.
Hello KCC4ME,
You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564
If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
OS X Mavericks: If you think you have incompatible login items
http://support.apple.com/kb/PH14201
Cheers,
Allen -
When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7 and iPhone 5.
http://support.apple.com/kb/HT1808
Try this step and if you cannot get your device into recovery mode there is a chance you have a hardware failure and you need to call apple to see what service options you have. -
why is my iphone stuck on the connect to iTunes after trying to update it and iTunes is telling me it cannot reach the update server I have also tried the recovery instructions, iTunes wont even connect to the iTunes store and my internet connection is fine
Come on now, someone must know how to fix this.
Maybe you are looking for
-
Case Case 180396 Title: WebLogic Server - TImeout problem Owner: ClearExpress WebEval Case Type: Administration Condition: Open-Dispatch Severity: Evaluation Status: Need Initial Contact Site Name: Transactions Unlimited Inc Site ID: IND001180 Addres
-
How do we lookup what played on a specific channel a day or two before?
Is there a way to lookup what has played on a specific channel a day or so before? T
-
Iphone 3GS is not detect by itune
I have 64-bit windows vista lenovo operating laptop.
-
Missing dll in top sessions monitor..
I installed OEM V9.0.1 on Win2K workstation. I am able to launch Enterprise manager console, access schema, etc, but when I click on TOP SESSIONS MONITOR (after entering the user id & password), i get the following error "the dynamic link library ora
-
Load Service Contract data through LSMW
Hi, I am trying to load the service plan item data for service contract through LSMW. I am able to load everything except service plan item detail. FM - CRMXIF_ORDER_SAVE I am passing the following fields in the following structure. Structure - E101C