HT201210 my i pad not work

my i pad not work and when i do the restore from iTunes also not work just run until the battery finish !  what is the solution ?

Try here:
https://discussions.apple.com/community/developer_forums?categoryID=164

Similar Messages

  • Tac pad not working correctly

    tac pad not working correctly

    I assume you mean "track pad?" If so, how is it not working? Be specific. If not, what do you mean?

  • Some time tech pad not working correctly

    I am buy a HP Pavilion laptop from awok.com. Some time mouse teach pad not working correctly some time open windows 8.1 time bar and some time i am using mouse teach pad then automaticly come right click popup menu coming some time i am try to scrol the page using mouse pad then automaticly Select all from the page so please help me

    Hello @BABUMON ,
    Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Notebook and mouse freezing. Here is a document on how to troubleshoot the mouse and Touchpad sensitivities.
    If you will go to the section on Adjusting TouchPad or ClickPad pointing sensitivities it should help resolve the issue.
    I would be happy to assist if needed as there are many models of HP Notebooks, I would need the model number.
    How Do I Find My Model Number or Product Number?
    Please respond with which Operating System you are running:
    Which Windows Operating System am I running?
    Please let me know.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Touch pad not working with HP G60 operating on Windows 7

    I have a HP G60 operating on Windows 7 (not sure bit) and have problems with touch pad not working.
    I was using touch pad and wireless mouse interchangeably for past year.
    No recent changes made to system. Suddenly not work one evening. Have tried shutting down and left overnight which has not resolve problems.  On one occasion, i was not even able to type and that resolved after re-starting computer.
    There is a button between space bar and top of touch pad which is white. Even when i press and turn red, it has not changed situation. Therefore I have to use my wireless mouse to operate for the moment. 
    Would appreciate any advice about what is the problem and ways to resolve it.
    Thanks a lot!
    Mo

    Hi,
    The numbers are fine
    Try the following.
    First, ensure the Touchpad is switched on ( the light between the Touchpad and the Spacebar should be white ), then download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp44501-45000/sp44940.exe
    Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall.
    When this has completed, shut down the notebook, remove any external devices connected to the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    When windows has fully reloaded - it will automatically load a generic driver for the Touchpad, but just let it do this.  Then open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP Pavilion Volume Touch-Pad NOT WORKING | NO SOUND HELP

    HP Pavilion Volume Touch-Pad NOT WORKING
    I have an HP Pavilion dv3t - 2000, Windows Vista computer. 
    SOMEONE DID ALREADY HELP ME HERE WITH THIS PROBLEM BUT THEY STOPPED RESPONDING | Please check that link out!
    The volume touchpad above the keyboard is not working properly (There is no sound coming out of the speakers or the headphone jack) , If you touch the megaphone part of the touchpad above the keyboard then it stays red, however the sound icon on the taskbar changes from mute to unmuted when you touch the red megaphone. The volume slider on the touchpad works suprisingly.
    I don't know if I uninstalled something or what but I need this problem fixed!
    Thanks!

    Hi,
    Shut down the notebook, unplug the AC Adapter and remove the battery.
    Follow the procedure detailed on Page 63 of your Maintenance & Service Guide to remove the RTC battery.  Hold down the power button for 30 seconds.
    Leave the notebook for 10 minutes and then re-insert the RTC battery, re-assemble and replace the cover, insert the battery, plug in the AC Adapter and start the notebook.  Tap away at f10 as soon as you start the notebook to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    If you still have no audio and the installer you downloaded previously still doesn't detect the Hardware, it would start to look like a Hardware failure, but to try and rule out any further software cause, try the following.
    Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run.  The 'Try it' option runs the OS from the CD without the need to install on your HDD.  If this runs Ok ( it will be slow running from a CD ) and you still have no audio output, this would tend to confirm a Hardware issue.
    http://www.ubuntu.com/desktop/get-ubuntu/download
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Synaptics Touch pad not working

    Hi there,
    My Synaptics Touch pad not working.
    System:  HP ProBook 4540S, MS Win8 x64 Ent.
    Please advise.
    Thanks in advance!

    Hello needsnow,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that your Touchpad on the HP ProBook 4540s running Windows 8 is not working. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
    I hope this helps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • All button and touch pad not working except power button

    I face the problems that all button and touch pad not working after power on or wake up from sleep state except power button. And i have make the system sleep and wake again so that the mac book air can working as normal( mouse can move and button got response).

    Sometimes electrical components needs to have all power sources removed and reintroduced to work properly.  Try performing a hard reset first, if it doesn't work then we'll move to the next step.
    To Perform A Hard Reset
    Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for  5 seconds); (if the computer doesn't power on, move to the next step)
    Disconnect the AC Adapter from the notebook.
    Remove the battery from the bottom of the notebook.  There will be a switch/button to eject the battery.
    Wait at least 1 minute with all power sources disconnected.
    Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

  • My hp 430 pc touch pad not working

    my hp 430 pc touch pad not working. please help me

    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Touch pad not working properly for iphone 4s

    touch pad not working properly for iphone 4s. Few letters are not working at all and my phone ios slowly loosing touch sensitivity. I lost my phone and got the new phone 10 months back.

    Try here >  iPhone:  Troubleshooting touchscreen response
    Also go to settings>general>reset>rest all settings phone will turn off and turn on by itself
    Once the phone is press and hold the home and power button at the same time wait for the apple sign then release the buttons phone will turn off and on.
    Update the software of your iphone or restore the phone to its factory settings

  • Touch pad not working of my laptop 48510s help for the same

    touch pad not working of my laptop 48510s help for the same

    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...Re-Sync your Content
    Note:
    To remove a forgotten Restrictions passcode you will need to  Restore the Device as New...
    OR... From a Backup created Before the Restrictions Code was set....

  • HP Pavilion Volume Touch-Pad NOT WORKING | NO SOUND

    HP Pavilion Volume Touch-Pad NOT WORKING
    I have an HP Pavilion dv3t - 2000, Windows Vista computer. 
    The volume touchpad above the keyboard is not working properly (There is no sound coming out of the speakers or the headphone jack) , If you touch the megaphone part of the touchpad above the keyboard then it stays red, however the sound icon on the taskbar changes from mute to unmuted when you touch the red megaphone. The volume slider on the touchpad works suprisingly.
    I don't know if I uninstalled something or what but I need this problem fixed!
    Thanks!
    This question was solved.
    View Solution.

    Hi,
    Shut down the notebook, unplug the AC Adapter and remove the battery.
    Follow the procedure detailed on Page 63 of your Maintenance & Service Guide to remove the RTC battery.  Hold down the power button for 30 seconds.
    Leave the notebook for 10 minutes and then re-insert the RTC battery, re-assemble and replace the cover, insert the battery, plug in the AC Adapter and start the notebook.  Tap away at f10 as soon as you start the notebook to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    If you still have no audio and the installer you downloaded previously still doesn't detect the Hardware, it would start to look like a Hardware failure, but to try and rule out any further software cause, try the following.
    Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run.  The 'Try it' option runs the OS from the CD without the need to install on your HDD.  If this runs Ok ( it will be slow running from a CD ) and you still have no audio output, this would tend to confirm a Hardware issue.
    http://www.ubuntu.com/desktop/get-ubuntu/download
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Key board and track pad not working

    Ok, My situation is similar to some of the other things posted but not quite.
    I tried to wake my computer up from sleep the other day and it wouldn't "wake up" so I did a hard shut down and restart. When it restarted the key board and track pad did not work. The caps lock light wouldn't come on or anything. I tried connecting a usb apple keyboard and mouse and those didn't work either.
    When switching to windows in bootcamp, everything works. So... I guess that means it's a software thing.
    I called Apple support and we did all the possible key combinations and restarts possible and it came down to this: I need to archive install tiger again, then install all of the updates, then install leopard back on (I don't have leopard disk because it was a family pack and im at college). My roomate's macbook (White, bought in aug 2008) install disks which are 10.5.2 do not work with my computer.
    My question is: Is this really the correct solution to my problem? Will archiving and installing tiger then leopard affect my files? I haven't backed up using time machine in a month, so is there a way to backup through osx with my keyboard and trackpad not working or can I do a good back up through my windows partition in bootcamp? Any more tips? Thanks, this has never happened before and I guess I'm a little clueless.

    Do you have access to another Mac? If so, possibly you could use Firewire Target Disk Mode to access your drive and do a current Time Machine backup:
    http://support.apple.com/kb/HT1661
    Since you have a family pack of Leopard at home, possibly you could have someone burn a safety copy of it and send it to you so that you can reinstall Leopard. Once you have the OS installed and brought up to date, you could even restore from Time Machine if you had to.
    Since we don't know all the steps you took, it's hard for any of us to say if this is the right solution. Evidently the Apple tech came to the conclusion that your software had become corrupted, and this could well be the case, since everything works on the Windows partition. Hence the suggestion to reinstall the OS.
    I think you need to get a copy of the Leopard disc so that you can bring your OS completely up to date. I'm not sure of the logistics of doing an Archive and Install with both Tiger and Leopard, especially if much of your work has been done on Leopard. I'm not even sure if it's necessary to reinstall Tiger--it might be better to just reinstall Leopard using Archive and Install.
    It's always a good idea to have a good up to date backup like Time Machine before attempting an Archive and Install, because things can go wrong. If they do, you may end up having to do an erase and install. If that happens, you can restore from your Time Machine backup.
    I think what you should do is to get a copy of your Leopard disc, and then boot from it and try to do the Archive and Install. Navigate to Disk Utility first and verify both permissions and the disk and repair if necessary. Then proceed with the Archive and Install. Once you're done, run all the updates. Then go to Disk Utility and repair permissions.
    Good luck!

  • Keyboard and Touch-Pad Not Working After Having to Install New Hard Drive

    I had to install a new hard drive in my HP Pavillion DV9700t that has Vista Home Premium 64-bit.  After going through the recovery process with backup disk the built in keyboard and touch-pad do not work.  During the installation, an error message came up saying something along the lines of "the drivers are not supported by this verison of windows because they are unsigned."  The drivers that had that error were "hpqkbfiltr keyboard filter driver," "HP remote control HID Device," and "hpqkdfilter driver."  I tried to update the drivers for the keyboard from the hp website, but the keyboard and touch-pad still do not work.
    My question is, where do I find the digitally signed drivers for the keyboard and touch-pad that Vista won't flag and disable?
    Help please!

    Sparkles,
    Thanks for the suggestions.
    When dealing with MS Fix It, I was choosing run.  Upon further investigation on that site, there really isn't a scan that applies to my issue anyways I tried the .NET Framework repair tool, and that seemed to work.  It told me to try re-running what I was having issues with, so I tried running the Windows PowerShell again, but again was faced with the following message "windows update standalone installer encountered an error: 0xc8000247." I went back to the .NET screen and hit "Next" because it didn't work, and that responded by saying they were going to submit logs to Microsoft.  I won't hold my breath on that one.
    I'm to the point where I honestly don't care anymore.  I have no idea what to do, because doing a clean install with the discs HP sent me isn't going to help because they are just recovery discs, and not an actual Windows disk.  This is the second hard drive I have had to put into my laptop and use those recovery disks on in the last 3-years.  The built-in keyboard hasn't worked during that time frame on either hard drive.  I don't think the recovery disks I was sent install properly.  Not sure where to go from here.  I spent way too much money on this laptop years ago having it custom built to handle all of my drafting programs, so I don't want to just kick it to the curb.  I was looking into the possibility of just replacing it, but I cannot stand the Windows 8 interface.
    I guess I should have fixed the issue with the keyboard on this hard drive before loading all of my programs.  Between the recovery disk install, formatting of the hard drive, and installing all of my programs it took well over 12 hours.  Not really looking forward ot that again Then there's shockwave and flash and all of the other goodies that my recovery disks won't restore anyways.
    Sorry if this seems like a negative post, but I'm just tired of trying to no avail.  Maybe I should just take it somewhere to get it looked at, but I can't see them being successful if the recovery disks won't help anyways.
    Thanks for you help,
    MadBuch

  • Apple wired keyboard.  Number pad not working with Windows Office 07 via bo

    I have a 27' Quad core i7 with windows 7 loaded via bootcamp. i have Office 2007 loaded in the Windows partition.
    My problem is that the number pad on my wired apple keyboard does not work in excel or word. The number at the top of the keyboard work fine.
    Has anyone found a solution please.
    Message was edited by: Fernbergjim

    Hi,
    does the numpad work in other Windows programs, or is it just the MS Office programs ?
    Have you tried the 'clear'-key (the one above the '7'-key on the numpad) to enable the numpad ?
    Regards
    Stefan

  • HT1338 track pad not working after upgrade to mountain lion

    I have just finished installing Mountain Lion and it apears to be ok but I have two imediate problems.  Firstly the track pad gestures are not working, I can only select anything with the click switch, single selection by finger is not working.  Secondly I have used the migrate assistant to transfer my files but I appear to have lost all my desktop shortcuts.  I have installed all the upgrades which were advised on start up.  I hope someone can help.

    For the first problem, you need to re-enable 'tap to click' in Sys Prefs:

Maybe you are looking for