Some time tech pad not working correctly

I am buy a HP Pavilion laptop from awok.com. Some time mouse teach pad not working correctly some time open windows 8.1 time bar and some time i am using mouse teach pad then automaticly come right click popup menu coming some time i am try to scrol the page using mouse pad then automaticly Select all from the page so please help me

Hello @BABUMON ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Notebook and mouse freezing. Here is a document on how to troubleshoot the mouse and Touchpad sensitivities.
If you will go to the section on Adjusting TouchPad or ClickPad pointing sensitivities it should help resolve the issue.
I would be happy to assist if needed as there are many models of HP Notebooks, I would need the model number.
How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

  • Tac pad not working correctly

    tac pad not working correctly

    I assume you mean "track pad?" If so, how is it not working? Be specific. If not, what do you mean?

  • TS1248 Track Pad not working correctly after upgrading to OSX10.8

    I've the same issue since yeterday night after upgrading to OSX10.8 from OSX10.6. The problem I am having is only right side of the track pad is not working.. Did some one already experience this issue ?
    See screen shot
    Cheers,
    Vivek

    In addtion to Altenbach's comments - 
    I'd recommend trying another VI function to get the power spectrum for
    your signal to see if the behavior is the same.  You can find some
    examples of VIs using the power spectrum functions using the NI Example
    Finder.
    You can go to LabVIEW's Example Finder by going to Help >> Find Examples.
    Then search for FFT. There should be some results that include FFT and
    Power Spectrum Units.vi, Power Spectrum Measurement.vi, Basic Spectral Measurements.vi,  and Spectrum Measurements.vi. Try opening and
    running these examples to see if the VIs are returning the proper
    results.
    Mark Walters
    Application Engineer
    National Instruments

  • Numeric pad not working correctly mainly in Microsoft Word

    I have an Apple keyboard with an integrated numeric pad integrated on the right.
    Since a while I have a problem that some of the keys on the numeric pad do not work anymore. The + does not work at all and the * toggles show/hide ¶.
    It is not in all programmes, Microsoft Word has the problem but Filemaker Pro does not.
    I tried an other KB same result.
    Any ideas how to fix this?

    smithrj wrote:
    It may be a mechanical issue. The keyboard may have issues. Do you have a spare keyboard to troubleshoot and narrow the problem down?
    Hi Ray
    If you look n my original post you will see I covered that.
    +I tried an other KB same result.+
    So answer is yes.

  • What is the wriong with this statement as some times it is not working

    Hi
    Please fnd below code
    UPDATE napp_ngs3pr_onhand_stg nn3o1
    SET nn3o1.status = 'ERROR'
    ,nn3o1.error_message = 'Duplicate Record'
    ,nn3o1.last_updated_by = p_user_id
    ,nn3o1.created_by = p_user_id
    ,nn3o1.request_id = p_request_id
    ,nn3o1.file_name = NVL (p_file_name, nn3o1.file_name)
    ,nn3o1.last_update_date = l_sysdate
    WHERE nn3o1.status = 'NEW'
    AND partner_name = p_partner_name
    AND nn3o1.ROWID > any (select nn3o2.ROWID
    FROM napp_ngs3pr_onhand_stg nn3o2
    WHERE 1=1 --status IN ('NEW', 'SUCCESS', 'ERROR')
    AND nn3o1.partner_name = p_partner_name
    AND nn3o1.subinventory = nn3o2.subinventory
    AND TRUNC (nn3o1.onhand_date) = TRUNC (nn3o2.onhand_date)
    AND nn3o1.part_number = nn3o2.part_number
    above query is not working properly some times when two files contains same data and loaded into table and processed one by one in diffrent sessions which are follwed each other.
    If I use dbms_lock.sleep in procedure to invoke the second procedure then above statement working properly.
    Please adivse.
    Thanks
    Raghav

    Hi, Raghav,
    Sorry, I don't know what you need.
    Whenever you have a question, post
    (1) The version of Oracle you're using
    (2) A little sample data *just enough to show what the problem is)
    (3) The results yu want from that sample data
    Your query can be useful, too. Always format code, and post it between {code} tags to preserve the formatting on this site.

  • Time limit is not working correctly

    I'm using a dot-connection task in which my participants have to complete a picture by 'drawing' a line with the mouse to connect numbered dots. They get a time limit of 10 seconds to do this; and they have to do it with three different pictures, so the script is repeated two times with different pictures.
    However, very often the program stops drawing the line after about 5 seconds. So, the picture is visible for the full 10 seconds and the little clock showing the remaining time also counts down these 10 seconds, but the mouse just doesn't leave a line anymore after a couple of seconds.
    This does not happen every time, sometimes it does work for the whole ten seconds. Sometimes, it even works for the first picture, but not for the other two, for example, although the script should be completely the same, since it is just repeated.
    It seems to me that it is completely random at which try it works and at which it doesn't; does anyone know what is going on?
    Thank you!!

    You have enough syncpoint() and syncwait(0.01) statements in your script?
    Johann Fouché
    eLearning Solutions Architect
    Description: jfmm logo
    +27 82 853 1010
    <http://www.jfmultimedia.co.za/> http://www.jfmultimedia.co.za
    Skype:  johann.fouche

  • NY Times print feature not working correctly

    Windows 7, Firefox 3.6.3. When I go tothe www.nytimes.com site, and read an article, I like to read the article as one long piece. Thus, I used to click the print feature on the article and go to a new page that allowed the page to be read like a pdf file, and when I enlarged the type it would increase proportionally. Lately nothing happens when I click on the print feature. That is for most articles. Yet, for a very few the feature works. The NY Times customer service person thinks the issue is with Firefox settings. The feature does in fact work with IE 8.0.
    == This happened ==
    Every time Firefox opened
    == A few weeks ago.

    just wanted to follow up on this post.  It turns out I had picked up virus and/or other malicious software along the way.  Stopped by to my friends at Malewarebytes and they fixed me up.  Touch pad works perfectly now.  Chow!
    L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

  • Help - EXIF time and date not working correctly

    I am a long time Lightroom user and am trying out Aperture 2.1. I like it a lot but I just found a serious problem. I'm importing some old photos into my Aperture library, by referencing the files in an existing folder. The time and date for some of the files gets messed up. When I view these files in LR the time and date is fine. When I look at the "date created" in the Finder, the time is also messed up. For a photo shoot I did in Europe, the time for some images has the right date & time when converted to US time, but for some images it has the right date & time but as if it were in the US time zone. The files are all Nikon NEFs.
    Also, when I view the files in the Aperture import dialog box they are in the right order. But when they get imported and I'm looking at them in Aperture they are in the wrong order.

    OK, I give up. Turns out that after one successful import where the dates were ok, subsequent imports have the dates messed up again - whether in Quick or Normal mode. I also tried importing to a new collection, and also tried importing after rebuilding the library (via command-option click in the dock). Still hving this problem.

  • My time machine is not working and the disk utilities cant repair it and is asking me to format the drive again. How can I backup the files before formatting the drive so that I don't lose my files?

    Hi
    My time machine hard drive has stopped working after the latest update and the Disk Utilities says,:
    Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
    How can I back up my files before reformatting when I can't even open the drive's folder?
    Thanks for the help.

    I think my time machine is not working correctly and I dont know how to get it back... I really need to get back my photos!!!!!
    Exactly this was the way I USED to make restores of files and photos..
    but know I CANT!!!!
    When I am inside iPhoto y click on the Time Machine icon at the Dock and it goes to this...
    at my right side there are the backups but when i click them nothing happens they are like NOT CLICKABLE...
    PLEASEE!!! Help me!!

  • My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

    My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
     Cheers, Tom

  • I got an error message: 'iTunes has stopped working. A problem caused the program to stop working correctly. The solution asked me to load latest version which I did many times and still not working... HELP!

    [Window Title]
    Microsoft Windows
    [Main Instruction]
    iTunes has stopped working
    [Content]
    A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
    [Close program]
    This is what I got... sorry, not very tech savvy to copy the error message onto here...
    Have tried uninstalled and re-installed iTune, updated the new version of 10.6... many times over still not working!!!
    I share the frustrations of many here. HELP!!!!!

    Hi there Nok Saensanoh,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    -Griff W.

  • I upgraded to 6.02 and still get this message from Gmail: "You are using an old version of Firefox which Gmail no longer supports. Some features may not work correctly. Upgrade to new version."

    When I opened Gmail in my Firefox browser, I got a message I've never seen, before: "You are using an old version of Firefox which Gmail no longer supports. Some features may not work correctly. Upgrade to new version." I clicked on upgrade to a new version and was taken to the Mozilla site, where I downloaded the latest version of Firefox... then, when I restarted my computer, Gmail still gives me the same message!! What's going on?

    Firefox 4 and later require at least OS X 10.5 and a Mac with an Intel processor.
    *http://www.mozilla.org/firefox/12.0/system-requirements/
    For an unofficial Firefox ESR 10.0.4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
    *http://www.floodgap.com/software/tenfourfox/
    *http://www.macupdate.com/app/mac/37761/tenfourfox
    Be aware that TenFourFox doesn't support plugins.
    *http://code.google.com/p/tenfourfox/wiki/ReleaseNotes1004
    *http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
    *http://code.google.com/p/tenfourfox/wiki/AAATheFAQ

  • LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

    Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
    Anybody know of a way round this?

    Hi @dnhowes ,
    I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    Was it the Nvram reset back to factory settings that you tried or a hard reset?
    Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
    I find that on the Lab printers when I am selecting different menus.
    If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • System Update not working correctly

    Hi forum,
    System Update (Version 4.00.0024) is not working correctly on my T500 with Windows 7.
    1: Not detecting old versions
    SU is not detecting, that there is an old version of Access Connection (5.42) installed although there is a new version 5.50 avaliable. I had to do a manual update.
    2: Not installing a suggested update
    Each time I run SU, I get a suggested update for "Fix for Issue of HDD with HDP Detection for Windows Vista/7". After downloading there comes a meaningless message "package was not installed" (Paket wurde nicht installiert). No hint for any error.
    3: Some drivers (e.g. for the ultranav) have not been downloaded at all - I had to test the functions of some hardware components and download the appropriate drivers manually in case of malfuncion.
    Probably there is a solution known within the forum community, at least this should be a message to lenovo (I received no response from the help desk when reporting this finding).
    Regards
    AH_DE

    Dear Herik,
    thanks for your answer.
    I checked the log  file and found thousands of entries. Here are the lines related to "Fix for ...".
    Info    2010-02-03 , 08:40:37
              bei Tvsu.Gui.CustomComponents.UpdatePanel.SynchronizeBoxPackage(Object sender, EventArgs args)
              Message: Selected to install: Fix for Issue of HDD with HDP Detection for Windows Vista/7, with
    Info    2010-02-03 , 08:40:43
              bei Tvsu.Coreq.LoadCoreqsProcessor.ProcessUpdatesImplementation(Update[] ups)
              Message: Candidate list:
    Fix for Issue of HDD with HDP Detection for Windows Vista/7[reboot type 3]
    Info    2010-02-03 , 08:40:57
              bei Tvsu.GenericPackageInstaller.GenericPackageInstaller.ExtractFiles(String extractCommand)
              Message: osfq03ww.exe -s -ex -fC:\SWTOOLS\OSFIXES Extract command was executed sucessfully in Fix for Issue of HDD with HDP Detection for Windows Vista/7 update
    Info    2010-02-03 , 08:40:57
              bei Tvsu.GenericPackageInstaller.CmdInstaller.InstallUpdate()
              Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 is being install using Windows Service
    Info    2010-02-03 , 08:40:57
              bei Tvsu.Engine.Process.PackageInstallerProcess.InstallNewUpdates()
              Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 installation failed
    ADDITIONAL ENTRIES 
    Info    2010-02-03 , 08:40:57
              bei Tvsu.Gui.FlowScreens.Results.AdjustComponent()
              Message: System updated:
              Installed=0
              Not Installed=Tvsu.Beans.Update[]
              Deferred=0
              Download Failed=0
              Hidden=0
    Severe          2010-02-03 , 08:41:17
              bei Tvsu.Sdk.SuSdk.ShutDownApplication()
              Message: Has happened an exception while the UNCAuthenticator.Shutdown() was executedShare name can not be null or empty
    Since I'm a normal user only, I can't interprete this information. Do you know what to do?
    Kind Regards
    AH_DE

  • Sound blaster not working correctly?

    Sound blaster not working correctly #I have a 64 bit, windows vista system.
    A Logitech Z-5500 Digital speaker system (one woofer, center speaker, left, right, rear right, left rear speakers, and a seperate control head).
    I have an X-fi gamer sound card.
    I recently formatted my hard dri've and reinstalled everything. Trying to make everything happy again. Here is my problem:
    When I use the Creative Console Launcher (CCL), my front right speaker tests fine. My front left speaker comes out of the woofer. And no other speakers will test at all. It does this in all modes (2., 4., 5. and 7.).
    When I play some music, it is coming out of all of the speakers. But it won't test properly in the CCL. So, do I have an issue, does what the CCL is doing not matter, or something else In some games, hearing what direction stuff is coming from matters, so if it is sending sounds to the wrong speakers, then I need to figure out a fix.....hence my post.
    Thanks for any help you can give, Robert

    Well, as the official documatation states, the Archlinux is for more or less advanced users, and if you're not one, we will make you one
    First of all, if you compiled your sound as modules, try putting this in your rc.local:
    stat_busy "Activating Sound"
    /sbin/modprobe your_sound_module
    /sbin/modprobe other_sound_module
    /sbin/modprobe yet_other_sound_module
    stat_done
    Change your_sound_module stuff to your module names as you configured in the kernel, of course.
    Second: in order to have two or more sound apps working at the same time, you need some kind of sound server. For default one (esd), uncomment esd in /etc/rc.local (remove ! before it) . After that, you'll have to configure your sound apps to use esd. I know that this is extremely easy with xmms and xine, dunno about others. I do not use esd, because my favorite games (quake3 and half-life) require direct access to /dev/dsp.
    And remember: nobody blames for asking 8)

Maybe you are looking for