HT201250 I had turned off the time machine auto back up and now when I try to turn it back on it keeps looking for a disk even though the time capsule is shown, do I have to set it up again as an initial?
I have been using the time capsule to back up both my iMac and recently added MacAir, it has been working fine but recentlky I had turned the time machine off on the Macair and now when I try to turn it back on it keeps looking for a disk even if I select the time capsule. Do I have to start the backup for the Macair as a new backup?
That happened to my brother earlier. He went into Facebooand then into another app and the same thing happened. he ended up having to restore it. Mine stayed with the Apple logo for a bit but its back to normal after pressing the buttons a million times. I hope you get your problem sorted. Goodluck!
Similar Messages
-
My email account got hacked so I changed the password and now when I try to get mail it just says operation can not be completed even though I have typed in my new password what do I do?
Can you acces the the account on another device?
Try contacting your email provider. -
Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I turned my imessage off, and now when i try to turn it on it isn't working, any help please?:)
i turned my imessage off, and now when i try to turn it on it isn't working, any help please?:)
See if your Mac will boot from the install DVD.
Then uninstall Internet Cleanup.
Allan -
I have been playing 7 Little Words game for months and now when I try to log in it gives a "plug-in" code and tells me to download an updated Adobe Flash Player...I have download it 8 times and still now access to this little game....HELP!
https://discussions.apple.com/docs/DOC-3591
-
Hi. Today I was reinstalling the facebook app. While the app was loading I went on the AIM app. My Ipod, once on the AIM app, froze. I held the sleep/wake button for several seconds and it still did not lock or turn off. I then held the home button and the sleep/wake button at the same time for several seconds, and it finally did turn off. I waited about a minute and when I held in the power button for several seconds and all I got was the apple screen and then it had the picture that said plug into itunes. I plugged it in my computer and itunes opened. My Ipod still had the picture that said plug into itunes. Im very upset about this. I have an 8gb, 4g, 9 month old Ipod touch. No problems with it until now. My warranty expires in February of 2011. Is there anything I can do at home to fix this? I did go on the common problems page and tried it and my Ipod still did not work. I have an apple store about an hour away from me. Is it nessasary to go to the store? Anything I can do at home? I appreciate your time and answers.
Thank you,
MirandaThat happened to my brother earlier. He went into Facebooand then into another app and the same thing happened. he ended up having to restore it. Mine stayed with the Apple logo for a bit but its back to normal after pressing the buttons a million times. I hope you get your problem sorted. Goodluck!
-
before it crashed I was trying to take firefox to factory reset, my computer turned off before. I have a mac OSX 10.6
Check if you still have a profiles.ini file left if you've only deleted the Firefox profile folder:
* /Users/<user>/Library/Application Support/Firefox/
If you still have a profiles.ini file, but the profile folder is gone then delete the profiles.ini file to force Firefox to create a new default profile.
*https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
*http://kb.mozillazine.org/Profile_in_use -
I tried to set up Sync on my smartphone. I had an "old format" account and started setting up a new one.
The verification email was immediately "outdated".
Since :
-When I request a new email (on mobile) it says it could not be sent.
-When I try and validate my email (on desktop) nothing happens.
-When I try and connect, I get an "Invalid Token" error.
-When I tried to "reset my password", the link "encountered an error".
-I can no longer sync my devices with the "old" method.
EDIT : I tried creating an account with another email... same problem.Seems to have resolved itself... Anyone can confirm ?
-
How do I sync my broken iphone 5s on itunes without entering the passcode on the phone? I have the replacemnt phone already but I would like to save my photos before I send it back. The screen is completely ruined.
Did you try to set it up again as new device?
How to back up your data and set up as a new device -
As title suggests...
OS X Mountain Lion public share works fine for Mac's but as a guest from Windows its adamant it wants a password. If I use proper credentials it will allow me in the public share from the windows PC but I dont want to add creditinatials it should be an open folder to Network (LAN) WORKGROUP users.
OS X Guest account is set to "allow guests to connect to shared folders"
The Public folder is set in "Sharing" as READ ONLY everyone.
Mac's can access the share without needing credentials.
Windows PC asks for Username and Pass (have tried Guest (no password) or just pressing enter (no details)
Searched these forums see a few other people with similar problems yet no Answers
Help please!!Try this on your PC:
Start->Run...->Open:\\<ipadressofyourmac>\<sharename>
You will be prompted for your username and password.
Or
'My Computer'->'Tools'->'Map network drive...'
enter:
\\<ipadressofyourmac>\<sharename>
in the 'Folder' field.
Click 'Connect using a _different user name_.'.
Enter your server username and password.
Click 'OK'.
Click 'Finish'. -
I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further. I have tried the diagnostic test but nothing was found.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
I've recently upgraded to Lightroom5.7.1 and now when I try to import photos a window pops up saying 'the photos can't be imported 'cos the files can't be read'. I had no problems before upgrading. I have Windows8 & can't find any 'app' which sets the type of files I can import. Any help appreciated.
Well, think about it. This is a Lightroom forum. We are here to answer questions about Lightroom and how to solve problems in Lightroom. Your permissions issue is an operating system issue, not a Lightroom issue. I didn't mean to be sarcastic. But there are plenty of Internet resources that will answer that question.
I just went to Google and typed in "change disk permissions", and there are links for the Mac as well as for Windows listed. There's no sense in me rewriting instructions that are already available. -
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Had to reinstall lion and now when i try to use time machine it won't show me any dates.
Had to reinstall lion and now when i try to use time machine it won't show me any dates. I hit the arrows but nothing happens. it says the backup is to big.
Only download Firefox from Mozilla:
*https://www.mozilla.com/en-US/firefox/
*http://www.mozilla.com/en-US/firefox/all.html
If you are having a problem getting a "good" download
*Do not use a download manager when downloading; the download provided with IE is OK
*Your system security settings might be set too high or your AV/AS application might be interfering. See:
**https://support.mozilla.com/en-US/kb/unable+to+download+or+save+files
**http://kb.mozillazine.org/Unable_to_save_or_download_files -
I have a mac book pro with retina,I haven't turned it on in a couple of months.no problems then, now when I try to turn it on i only get apple logo and progress bar. After a few mins the laptop just turns off and nothing eles.any help would be appreciated thanks
I linked to it above, but here is another link.
http://support.apple.com/en-us/HT201262
Maybe you are looking for
-
What is going on??? Since I updated my iPhone 4s to iOS 6 all messages that are sent to my phone from another iPhone user also get sent to my daughters iPhone 4. And she can receive my text but cannot reply to me.
-
Problems Exporting rpts to Excel!
Post Author: miguelitobh CA Forum: Exporting Hello Everybody! I´m new in the forum, and i have a question that is killing me... I´ve an application that runs asp and COM+ using Visual Basic... I made another litlle module for Crystal Reports rpts imp
-
Problem with load Database Home Page
when I try load Database Home Page i have this error: ORA-06550: line 2, column 0: PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following: begin case declare exit for goto if loop mod null pragma raise return select updat
-
We are seeing our logs filling with the following exception: Wed Sep 20 20:23:14 PDT 2000:<E> <ListenThread> Listen failed, failure count: '1' java.net.SocketException: Software caused connection abort at java.net.PlainSocketImpl.socketAccept(Native
-
Complex expression - using in operator
We are trying to build an expression that would result in the following sql where clause: where (settlement_id, retailer_id, site_id, end_read_datetime,txn_datetime) in ( select settlement_id, retailer_id, site_id, end_read_d