HT201263 IPhone 4S unlocked set , from iOS 6.1.2 upgrade to IOS 6.1.3 unable to update and now is in recevery mode, tried using ITunes to restore but end error ( error -1)

I had one iPhone 4S buy from Singapore, have been using this phone about a year,
Things happen when update from iOS 6.1.2 to iOS 6.1.3 (non-jail break phone).
After update, when on 3G, phone become no service or searching. Had change new SIM card carrier vision 14.1.
Things never change, so I did another restore using iTunes , things get worst, phone stuck in recovery mode and ending error (error-1)
Had tried few time and same error.
Note ITunes latest vision

I had the same issue until yesterday. been struggling with it for the last 2 days. I bought the unlocked 4s from the store a week ago and now I cannot upgrade from 6.1 to the higher version.
Although, after searching a lot on the net, I was able to find a software that'll get you out of the recovery mode. Hope this helps. Install the software and click on the 'Recovery Mode Loop Fixer' (2nd tab) and click 'Set Auto Boot True'
The software looks shady but worked.
Link:
Ireb download link- WINDOWS
NEW LINKS- ( http://hotfile.com/dl/179514703/4b201... ) (http://www.mediafire.com/?c4jqux6alnj... )
IREB FOR MAC
http://mediafire.com/?mymjzjaymyj

Similar Messages

  • Hi, I updated my iPhone 4 from iOS 5.1 to 5.1.1 and now it won't connect to 3g, it only gets EDGE, does anyone have the same issue? Anyone knows how to fix it? Thanks

    Hi, I updated my iPhone 4 from iOS 5.1 to 5.1.1 and now it won't connect to 3g, it only gets EDGE, does anyone have the same issue? Anyone knows how to fix it? Thanks

    Yeah, it´s happening in normal 3g coverage area, in fact, i used the 3g to download the iOS but after installing it, the phone doesn't get the 3g anymore.
    I tryed the reboot pocess, but it didn't fix it
    I haven't tryed the restore to factory settings process,
    Is there a way to downgrade to iOS 5.1 again?
    Thaks

  • How do you burn videos taken with myIphone and stored on my computer to a DVD disc.  I purchased and tried using RealPlayer Plus 16 but got error message saying "unsopported media type"?  I alos tried using Real Players file converter with no success!

    How do you burn videos taken with my Iphone 4S and stored on my computer to a DVD disc.  I purchased and tried using RealPlayer Plus 16 but got error message saying "unsopported media type"?  I also tried using Real Players file converter with no success!  Thanks in advance for any help you can give!

    Probably the OP is no longer paying attention to this unless the OP is subscribed to this discussion.  While not really an iPhone question I guess using an iPhone to produce the movie which then needs taking to the next step makes this as good a starting place as any unless you happen to know enough about what to do to determine in which forum to post.  A suggestion in that direction would help.
    Anyway, Apple is backing off from supporting optical media.  It also depends upon what you mean by "DVD".  A DVD is just an optical disc which can support different file formats, but many people think it means a movie disc you can put in your TV.  Producing a movie disc requires special iDVD authoring software Apple used to sell but stopped several years ago.  I don't know if the old versions work under newer systems.  There's also the free Burn application which authors DVDs but takes a bit of learning and has nowhere near the features of iDVD.
    If the OP means simply burning the transferred movie files to a DVD for archiving in computer format you don't need special software for that; its built into the operating system File > New Burn folder etc.

  • I tried to up date my i phone 4 to iOS 5 then it wiped my phone and now it tells me to connect to iTunes and that the iPhone is in recovery mode and when i connect it goes to preparing to install to iPhone but never goes any further how do i restore

    i tried to up date my i phone 4 to iOS 5 then it wiped my phone and now it tells me to connect to iTunes and that the iPhone is in recovery mode and when i connect it goes to preparing to install to iPhone but never goes any further how do i restore the phone

    by reset option do you mean the DFU restore? worked for me, have you tried that?
    if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update.

  • HT1212 iPhone diabled, tried to use iTunes to restore, but iTunes gives error message (0XE8000084). Now what to try to reset iPhone?

    iphone disabled, tried to use iTunes to restore, but iTunes gives error message (0XE8000084). How to restore iPhone?

    Try here   =   http://support.apple.com/kb/TS3221

  • Hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me

    hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me?

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • TS1441 My iPhone displays: Use iTunes to restore, but once in iTunes does not let me NOT to restore it

    Hello - I connected my iPhone earlier since a pop-up message showed up saying that I needed to back up my information in iCloud, once I connected it to my iTunes, it was taking more than 2 hours to complete, I decided to disconnected in the middle of the process, and I was not able to use it anymore, and it only displays: Use iTunes to restore.  I connected it again, but it does not do anything.  Another message comes up in the iTunes screen saying that in order to use the iPhone in iTunes it needs to be restored.  That is not my intention, but it does not let me do anything else.  Does anybody know what to do please?
    Thank you a million!

    Hello there, ksknoxie.
    The following iPod classic Troubleshooting Assistant offers a great guide to follow for troubleshooting:
    Apple - Support - iPod - iPod classic Troubleshooting Assistant
    https://www.apple.com/support/ipod/five_rs/classic/
    Although following each step in order is recommended, many who have reported your symptoms have seen the Restore step resolve their issue.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I backed up my iPhone first then did a factory reset so I could get the iOS 8 update and now that I have it, my phone won't restore

    Idk what's happening and I really hope I did not lose EVERYTHING on my phone. After the backup and reset, I updated my phone to iOS 8 and during the updating process on iTunes it said backing up or something like that and then I instantly thought "noo! backing up what? theres nothing on my phone right now" so i think it was backing up my phone after I reset everything up to my computer so during that I THINK I pressed restore iPhone while it was updating to iOS 8 and i did that because it said it was backing up when there was nothing on my iPhone and everything from my phone is on my computer so I tried to restore it during the updating process just to make sure everything went back to my phone. Then the update got corrupted. I don't think it was the stuff I backed up because it was already on the computer and it was the update that wasn't finished so I think it was the update that got corrupted. Now I have iOS 8 and every time I try to restore my phone it says it restored but nothing ever happens, it brings me to the "Hello" screen every time. Then when I get to the set up as new iPhone or restore from iCloud/itunes screen I try to restore it again and back to the "Hello" screen I go. PLEASE HELP ME GUYS PLEASE!

    I went back to iOS 7 and my backup file is restoring but when its done nothing is on my phone still and only takes 11-15 minutes to restore the backup instead of taking 25+ minutes like usual so I guess the backup is corrupted. How can I fix this?

  • I updated my ipod(2gen)to the 4.3 update and now its on recovery mode a  nd i tryed restoring it but error 9 keeps poping up?

    I recently updated my ipod touch with the new 4.3 update, and when it was done every thing i had was erased and i backed up the ipod before i updated .also it in recovery mode and it has the connect to itunes logo on it.I tryed restoring it but it keeps saying error 9 each time i tryed .I NEED HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Error 9: This error occurs when the device unexpectedly drops off the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Above from:
    http://support.apple.com/kb/TS3694

  • When I clicked on the Newest version of itunes something happened and now when I try to access the itunes store I get an error (-32-12) and it says to check my conectivity.  I have three ipods and the problem is with the on line connection with itunes.

    After I clicked and downloaded the newest version of itunes I no longer am able to connect with the store. I get an error (-32-12) and it says to check the connectivity. The problem is with the on line connection. I attempted to reload itunes , still the same problem exists.

    ... and that's a new one that I wasn't expecting ...
    Okay ... lets try a complete uninstall/reinstall as per the following document:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Help getting"use itunes to restore" error message

    I connected my ipod to my friends computer to copy a program i had on their to his computer and i then i take my ipod out and get the "connect to your computer use itunes to restore: error message. I know i can just restore it im not going to do that becasue it would be the third time doing so. I get a error with the ipod software but when the ipod updater program comes on the only option is restoring. So i am wondering is there a way to reupdate the software? if not is there any other solutions not involving reformatting the whole ipod.
    Thanks in advance

    hey kurtis,
    seems like you and i were having the exact same problem. i took mine to an apple service centre today. the guy said if he can restore it in store it'll cost me $44- for a service fee if not he'll send away for a replacement iPod for free as it is under warranty.
    got 10 mins down the road and recieved a SMS from the apple account saying it couldnt be restored and therefore had faulty hardware or the like and so i should be recieving the new one friday.
    i recommend if you're still under warrenty (you can check by entering the seriel # on the back of your iPod somewhere on this site) that you follow my lead, even if they fix it in store $44 is better than $450.
    cheers!
    min

  • Tried to sync ipad2 with itunes and got an error and now ipad frozen with usb cable/arrow/itunes logo.

    I'm trying to sync music from my itunes library on my PC to my ipad2. During process got an error(don't remember #) and then it went to backing up. Now the ipad is frozen with a usb cable coming up to a white arrow and then the itunes logo. The ipad will turn on and off but nothing else. Any ideas?

    You will probably need to restore using Recovery Mode. You can read about it here.
    http://support.apple.com/kb/ht4097
    Or you can follow these Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • An error occurred while software update and now can't get emails either

    Please Help, an error occurred while software update (unable to update) and now I can't get my emails either.

    I figured it out....I had downloaded and deleted my photos.  then I was able to upgrade...easy!

  • I downloaded the iOS 7.0.2 update and now my iPad is stuck on stupid

    Downloaded iOS 7.0.2 , when ipad shut down to restart and install, it got stuck flashing back and forth from reboot screen with the apple logo on it, and my lock screen.  It's been flashing back and forth for about 45 mins now and I'm about ready to throw it out a window...along with my iPhone 5 bc I dislike iOS 7 very much.

    Unable to Update or Restore
    http://support.apple.com/kb/ht4097

  • HT201210 I have tried to update my iPhone 4 many times (from iOS 5.1 to latest version), but everytime it fails and says that it cannot be updated. unknown error (3194). please help.

    I have tried to update my iPhone 4 many times (from iOS 5.1 to latest version), but everytime it fails and says that it cannot be updated. unknown error (3194). please help.
    <E-mail Edited by Host>

    You might try reading the entire help document you linked from:
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

Maybe you are looking for

  • Is there a way to detect the end of a video?

    Is there a way to detect the end of a video.. .mp4 or youtube? I want to be able to detect the end of a video and then have it do something...ie play on timeline or go to and play symbol.

  • Problems running Forms in Forms Builder 6.0.8.21.3

    I have upgraded some Forms from 4.5 to 6i. I compile and run the forms in Forms Builder 6.0.8.21.3. However I have a problem when running a specific form. When I run the form directly from Forms Builder the problem do not appear. But when I call the

  • Unbalance transaction Error - Journal Entry Posting

    Hi all, Good afternoon. i posted  journal  entry using DI -API. I have two  Journal Entry when i add the first journal Entry added the second journal entry not added its show the Error Unbalanced transaction Each Journal Entry have 2 lines I am using

  • Fqdn and domain in solaris 11.1

    hello, i have difficulties to understand and set up fqdn in solaris .. sendmail still annoys me with his message about missing fqdn and using hostname instead .. what I did: i set my domain on several places: # svcprop dns/client | grep domain config

  • To reach the end of a varchar

    i want to remove last character of my varchar variable. is there any command as to reach a char of varchar. such as charAt() in java. so, i have a varchar variable. and its last character is ','. i must remove it. how can i do this? thanx