HT201263 it is in recovery mode. after Recovery carried out it seems it can not be reproduce it says eoror number 1

it is in recovery mode. after Recovery carried out it seems it can not be reproduce it says eoror number 1

Try and restore it 2 more times. If you continue to get error 1 (or -1), that indicates a hardware failure. Make an appointment at the genius bar.

Similar Messages

After upgrading to Lion, my Canon 7d can not be found.

After upgrading to Lion, my Canon 7d can not be found. I have used the USB connection to connect to my camera for several years with no problems, until now. I have reset the SMC, by powering off the computer and unplugging everything for approx 30 minutes. There are no new drivers available and any assistance will be appreciated.

I was having the same issue after upgrading to Lion OSX. I searched the web and found many people had the same problem but no solution so...
I called Canon and they told me to run 'Image Capture' its part of the Canon Software Suite so you should have it and then try downloading the pictures like you usually do. I use 'Image Browser' and with 'Image Capture' running in the background it works perfectly now.
Hope this helps!!

I have downloaded iTunes 10.5 but after it downloads it vanishes and I can not locate the file anyway on my PC. I have done this a few times now. Any ideas?

have downloaded iTunes 10.5 but after it downloads it vanishes and I can not locate the file anyway on my PC. I have done this a few times now. Any ideas?

This has happened to me over the last few hours. iTunes just would not open, so I uninstalled and downloaded again. Still refuses to open. iPhone cannot be synced as a result. Help anyone...

Iam trying to reinstall the OS X after erasing the hard disc but it can't be completed it says u need to visit the purchase page ??? I tried many time to download it any help

Iam trying to reinstall the OS X after erasing the hard disc but it can't be completed it says u need to visit the purchase page ??? I tried many time to download it any help

On the bottom of the MBP is the serial number. Enter it here and post back the results:
https://getsupport.apple.com/GetSASO?
This will identify the exact MBP that you have.
Ciao.
The system is under maintenance now. Try this link instead:
http://www.chipmunk.nl/klantenservice/applemodel.html
Message was edited by: OGELTHORPE

Hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the

hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the help

What I am saying is ..........
The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship with the Carrier and then follow the Carrier's process to unlock
With a PAYG it usually means adding a specified (by the carrier ) amount usually £15 /£20 depending on the carrier
This is how O2 function and according to Gemma this is how Vodafone work

After update to OS4.2.1 I can not get the ringer to work for incoming calls

after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

HT5624 Restore back up of my iPhone-password not recognised. After restore, itunes can not restore because it says the password is incorrect. But I can sign into my apple account with the password.

Restore back up of my iPhone-password not recognised. After restore, itunes can not restore because it says the password is incorrect. But I can sign into my apple account with the password. My iPhone is now set to factory settings as a new phone, what can i do to access the back up from my phone before I reset it.

That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

After downloading IOS 8.0.2 I can not connect to the internet, any solutions?

After downloading IOS 8.0.2 I can not connect to the internet, any solutions?

It is not the wording but the lack of detail.
The iPhone connects to both the phone network (3G, LTE, etc) and to WiFi networks. Which one (or both) are you having issues with?
If it is the phone network, go to Settings->Cellular and see if Cellular data is turned on globally AND for the apps you wish to use.
If it is a WiFi network, go to Settings->Wi-Fi and see if you are connected to a network. If so, touch the circled "i" next to the network name and see that you have a valid IP address, etc. (take a screen shot and post it if you don't know what to look for).

After updating the firmware on IOS7 I can not activate my iphone 4.

After updating the firmware on IOS7 I can not activate my iphone 4. Itunes says "Unlock the iPhone on this ***** @ *******. ru impossible"

ITunes says:
At the moment the iPhone is tied to the Apple ID (i ***** @ y *****. Ru). Sign in with Apple ID, which is used to configure this iPhone.
Unlock iPhone on this I ***** @ ya *****. Ru impossible.

I have a new iphone 5. After update and download some programs I can not just turn it on and shown in the LCD "iTunes" with a picture of a USB cable. - Alguine can help solve the problem. thanks

I have a new iphone 5. After update and download some programs I can not just turn it on and shown in the LCD "iTunes" with a picture of a USB cable. - Can anyone help me solve the problem. thanks

Its trying to tell you to connect it by usb to a computer to reflash a failed firmware flash
You should comply

After updating to iOS 6 my ipad2 "can not connect to iTunes Store"

Can some please help me know how to get iTunes working again on my iPad2? After updating to iOS 6 my ipad2 "can not connect to iTunes Store" message keeps popping every time I try to launch iTunes.

I dont even get a message. It just has ablank screen. I can see all of the options on the bottom but nothing loads. Any ideas? I am trying a restore now

I try to restore my iphone in recovery mode but didn't get it and now can not come out of recovery mode please help me

Hi I had perches one iphone4 from Hong Kong last month but after coming back i try to restore my iphone but it's give error 3194 then i try to restore it in recovery mode but still can not restore error -1 and now i cannot get out of recovery mode please help me to shovel this problem.

Are you running modified software on your phone? This error seems to be common if the firmware has been modified and you're trying to restore the phone again.

After "Replace with clip" the original clip can not be deleted from the project - why?

After using "replace with clip" to replace clip A in the timeline with a new clip B , clip A can not be deleted from the project anymore.
If you try to delete clip A, you get a warning, that it still has references in one or more sequences.
If you continue and delete clip A, it seems to be deleted - at first!
Unfortunately if you save and reopen the project, clip A is restored to folder "Recovered clips".
It's not possible to really delete it.
I also did not find a way to unlink clip B from A .
The only thing you can do, is to revert the change by "Restore Unrendered" in the clip context menu. But that's obviously not helping
I dont know if this is a bug or a feature. I understand, that it can be useful to undo the "replace clip" function, but why would anyone not want to be able to delete the original clip at all?
help how to fix this problem is greatly appreciated!
I use Premiere Pro CC 2014.2 (Win7 64bit)

I'm sure it has nothing to to with other sequences.
You can easily reproduce this behaviour:
1. create a new project
2. import 2 clips and name them "A" and "B"
3. put "A" in the timeline
4. ALT-drag "B" over "A" in the timeline (or right-click "A" in the timeline while selecting "B" in the project files and select "replace with clip ... from bin")
5. delete "A" from the project files
6. save and close project
7. reopen project
=> "A" reappears in "Recovered clips" and can not be deleted.

After update to OS X Maverick I can not open files in Lotus Notes Smart suite. Is there any way to solve this problem?

After I updated to OS X Maverick I can not open files in Lotus Notes Smart suite. Is there any way to solve this problem?

Ok this worked to solve the error.
Use cmd prompt in windows 7 or 8 and run as admin:
sc config lanmanworkstation depend= bowser/mrxsmb10/nsi
sc config mrxsmb20 start= disabled
No need for all that power shell nonsense as shown elsewhere for windows 8.
That's it. Also force smb2 disabling on the apple side for good measure.
With the above I was able to network mavericks and windows 8.1 pro flawlessly. He issues I had before where I could not read video, ISO and audio files (but could open documents and pictures from the windows machine connected to an apple network share folder went away.

After updating to iOS 5, i can not purchase apps. it says can not connect to iTunes store

After upgrading to IOS 5, I can not purchase anything from the app store. I get the message "Can not connect to iTunes store". I am able to get updates from the app store only through my phone. Also, Game center I.D. wasn't accepted. It said the user name was already taken. Had to create a new one.
Please help

You might try to confirm that your messages are actually sending. I have the same problem, but my messages appear to be sending but are not actually being received.

HT201263 it is in recovery mode. after Recovery carried out it seems it can not be reproduce it says eoror number 1

Similar Messages

Maybe you are looking for