HT201263 Nothing has worked... i have tried recovery mode, higher volt chargers, nothing seems to turn it on and it doesnt get recognized by itunes
I really need help
If you have tried a reboot by holding both the power and home buttons until the apple logo appears, and that does not work either, the best option is the Apple store genius bar to have it checked out.
Similar Messages
-
Have gone into my snyc data file to erase all data - error says that it can not be done at this time. I still have the error while syncing on my bar. Have tried to get a new sync number and that will not change - it goes back to the original how can I start over and try again?
This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
I have tried to install OS X Mountain Lion on a Macbook 2009 and it has gone past its install time into the minus time.do this twice it wont install
Help
Thanks GuysNegative numbers on the installation progress bar can happen. Just let the installer end.
Those negative numbers do not mean something is really going wrong. -
Help Me
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 for 64 GB one and $99 for the other 4Gs. They do not fix yours. The cracked screen voids any warranty you had on the iPod.
Apple - iPod Repair price -
The Iphone "Iphone" could not be restored. This device isn't eligible for the requested build. Then I am given the option to click "More Information", or Ok. I have followed all of the necessary steps, but I haven't had in suecessful trials. Will someone PLEASE help, I am REALLY ready to use my fricken 280 Dollar Iphone! Lol. Thanks.
Bad news: It sounds as if you were sold a jailbroken iPhone.
Good news: File a SNAD with eBay. Make sure all your correspondence has been through eBay Messaging. The fact that the seller has been ignoring you will not sit well with them.
You will get 100% of your money back, including shipping. Paypal will simply seize his funds and return what is yours.
Lesson: Don't buy a used iPhone.
It's much worse for the seller. His PayPal and eBay accounts will be frozen. Until he squares up with both you and eBay, he's out of money and out of business. -
please help my iphone 4s is disabled and i cant connect to itunes
Hi, icaruss96.
Thank you for visiting Apple Support Communities.
Thank you for visiting Apple Support Communities.
If your iOS device is disabled, here is an article that I would recommend going through.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled
http://support.apple.com/kb/ht1212
Cheers,
Jason H. -
My ipod is disable and i can't remember my password. I tried recovery mode, what should i do?
I changed my password and i cant remember the new one. I tried some combonations but it just disabled it. I have tried recovery mode and i went to change my apple id password, but it didn't do anything. Should i go to the apple store or is there something i can do?
- DesperateYou said
i went to change my apple id password, but it didn't do anything.
That means that you successfully restored the iPod and it is asking for the Apple ID and password used to set up the iPod last time. That is the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
You have to enter the Apple ID and password -
my ipad 2 touchscreen doesn't work on most of the screen it got cracks all down the left side of my ipad and it has been working fine for a year after cracking but just woke up and touchscreen doesnt work i have tried to reboot it but still nothing
It might be time to contact Apple for an out of warranty repair (actually replacement)
See here: http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Replacement for any model iPad 2 is $249 -
I have an iPad two and my front camera doesn't work I have tried resetting it Clicking it twice nothing works can you please help me!!??
Try closing the Camera app:
1. Double-click the Home button to reveal the Task Bar
2. Hold down the Camera app for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen
If the above doesn't solve the problem, do a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider -
My screen won't work, i have tried turning it off but i cant swipe the power down button because my screen doesnt work. I have only had my iphone 4s for one day and this has happened, someone please help me.
Did the trick! Not sure what I did to cause the screen to go numb, but this worked perfectly!!! I cleaned the screen and must have inadvertently selected something that locked the screen. This perfect solution kept me from having to run to the Apple Store. Many thanks.
-
I tried to backup my iphone to itunes and then got a message "Itunes has detetected an Iphone in recovery mode. you must restore tghis Iphone before it can be used with Itunes." Does this mean I've lost everything on my Iphone & have to restore to it's original settings?
Is the device actually in recovery mode? What is showing on the display?
If it's the "Connect to iTunes" screen, then the information is already lost.
If you've forced the device in DFU mode... reboot it and simply sync with the computer. -
I have tried to update my Iphone 4S today to IOS 7.0.6 and now my iphone wont connect to itunes as it says that it is detected that it is in recovery mode and needs restoring. How do I restore it? I cannot get my phone on at all?
Click restore in itunes.
-
"iTunes has detected an iPod in recovery mode" restore and doesn't work
I'm trying to put my music on my new iPod and keep getting this error message "iTunes has detected an iPod in recovery mode. You must restore the iPod before it canb work with iTunes". I click "restor to factory settings" and then the same error message comes up when it's complete. iTunes does recognize my iPod, it just doesn't seem to realize that I've already done what it's telling me to do. Going around and circles and can't get my music on...:( Help, please?
Thanks!
BethHave you had a chance to look at this troubleshooting page? Have a look at the bottom section that covers what to try if restoring doesn't work, it may be of some help: iTunes has detected an iPod in recovery mode - Use iTunes to restore
-
Tried to upgrade but got "iTunes has detected an iPod in recovery mode"
Hi, just tried updating my Itouch 5 to the newest upgrade on Itunes. Mid-way the Itouch screen displayed the image of the plug pointed to the Itunes Icon as if it was new. Then Itune as me if I wanted to restore. I really was sad to loose my kids videos but seemed to have no option, so I hit restore. Itunes proceeded to download the upgrade....again then I got this message
"iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes."
I chose restore again, then it proceeded to re-download the upgrade and present the same message. Help... How can I get my Touch up and working again? And does this mean I've lost my videos for good?Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I forgot my password to my ipod touch and locked it out. It told me to connect to iTunes and I did. I put it in recoery mode and started the 5 hour download of the restoring process. I tried it many times it always ends up stopping and an error occurs. Now iTunes is telling me I have to put in my password for my ipod before iTunes can use it and recognize it. But my ipod is still telling me to connect it to iTunes and I just want to restore my ipod.
Try Recovery Mode a few more times.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.
Maybe you are looking for
-
I'm trying to put a hidden time stamp field on the bottom of all pages of a thousand page document, yet when I duplicate the field, the reproduced fields appear at different positions on different pages. Is there a way to make them all appear uniform
-
Error using IO taglib in BEA 8.1
Hello, I am integrating a web application into BEA 8.1 and everything seems to be getting worked out except for 1 thing. In one of my JSP pages I use the Jakarta io taglib to send a SOAP message. When I try to
-
Recently upgraded to 2012 from 8. Cannot get Monitor to work. I can browse to the 8200 port and get a blank webpage. The individual web pages for the POA, GWIA, MTA, Webaccess and DVA all work. This is on SLES 11.1. Maybe it is not supposed to work.
-
HT5463 How do you transfer music from a computer onto an iPhone 5c?
I have asked many people and I can not figure it out. Nothing works.
-
How to apply change Pointers ?
I need to trigger a change pointer when i make a change to material Group in the Order. So how can i do that ?? Can anyone help me out..