HT201317 Some photos go to Photo Stream and some go to Camera Roll. How to fix this so that all go to Photo Stream when I take pics?
Sometimes when I take pics on my iPhone 4s the some of the pics go to the Photo Stream while others go to the Camera Roll. Why do they not all go to the camera roll? How to fix this?
Welcome to the Apple Community.
All photos taken on the phone go to the camera roll. If photostream is enabled they should also go to photostream in addition to photos added from other devices. Photos added to photostream from other devices will not be added to the camera roll on your phone (unless you move them manually.
Photos taken on the phone should be added to camera roll immediately, it may take a few moments before they appear in photostream, while they are sent from the camera roll to the cloud and back again to photostream.
If photos aren't being added to photostream there may be a couple of reasons:
Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
Photostream only syncs when the camera app is closed, ensure it is closed.
Photostream only syncs when the battery is above 20%, try recharging the device
If the problem persists:
Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.
Similar Messages
-
I have 2 questions about the new Photos app for Mac (I'm running 10.10.3 on my MacBook Air 1.8GHz Intel Core i5 mid 2012)):
1.Should I delete my old iPhoto Library Current folder once everything is transferred to Photos Library Current?
2. Does this mean that all my new photos on any device can come off my Mac and ONLY be in the Photos Library which is in the cloud? That would free 59GB off my Mac and that would be very good.1.Should I delete my old iPhoto Library Current folder once everything is transferred to Photos Library Current?
You can, but I would wait, until you have have been working with Photos for some time and are sure, that everything migrated well. There may be hidden flaws in your library and teething problems with Photos. Don't be in a hurry to abandon iPhoto completely. You may need to go back, until bugs have been fixed. Th Photos Library does not duplicate the photos in your iPhoto Library. the media files are shared and do not need extra space: See: Photos saves disk space by sharing images with your iPhoto or Aperture libraries - Apple Support
2. Does this mean that all my new photos on any device can come off my Mac and ONLY be in the Photos Library which is in the cloud? That would free 59GB off my Mac and that would be very good.
If you have enough iCloud storage. But Photos will still need space for local thumbnails on all devices.
See: Apple - OS X - Photos Preview
Fill your library, not your device.
iCloud Photo Library can help you make the most of the space on your Mac. When you choose “Optimize Mac Storage,” all your full-resolution photos and videos are stored in iCloud in their original formats, with storage-saving versions kept on your Mac as space is needed. You can also optimize storage on your iPhone, iPad, and iPod touch, so you can access more photos and videos than ever before. You get 5GB of free storage in iCloud — and as your library grows, you have the option to choose a plan for up to 1TB. -
Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
- on my tv screen is a picture of the device and a big? - anyone know how to fix this?
Hello Cher71,
This behavior indicates that there is a hardware issue with the Apple TV.
Apple TV (1st generation): Starts up to a flashing question mark
http://support.apple.com/kb/HT4359
Cheers,
Allen -
ICloud will not sync my contacts or calendar in Mac Office 2011. ICloud does however sync to my PC at work running Microsoft office 2010 and also to my IPad and IPhone. Does anyone know how to fix this?
Welcome to the Apple community.
Unfortunately Office for Mac does not support the correct protocols to work with iCloud. -
Processor 3.4 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw here.)
Older Macs with a single Harddrive would simply expand OS management on the drive, and I think I understand the new Fusion Drive to do just that, but how do I get this product that I spent a great deal of money on to be more than a pretty screen?I was confused by this statement
It is telling me the harddrive is full and is not functioning correctly.
OS X manages ram and when you run out, it create swapfiles to extend your ram on the HDD (Hard Disk Drive). The OS itself, takes about 16 gig of space and that too resides on the HDD. Your 16 gig of RAM is really a temporary space that holds things from the HDD so the processor can work on them. There is no design flaw between your ram and HDD. Something else is going on and there are a lot of smart people here to help you figure out what that "something else" is.
I would do three things. First I would create a backup, backups are important. Second, I would reboot into recovery and repair my HDD. Lastly while still booted in recovery I would repair permissions.
Can you capture a screen shot of the exact error you are getting? -
Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. The screen is still black and white. Any ideas of how to fix this?
Hi im,
Thanks for using Apple Support Communities. This article has a few troubleshooting ideas for issues with color on your TV when using Apple TV:
Apple TV (2nd and 3rd generation): Troubleshooting video issues
http://support.apple.com/kb/TS5148
Cheers,
- Ari -
since i updated my Apple ID with correct email address I can now only send imessages to email addresses and not iphone numbers - any idea how to fix this problem ?
You might want to try contacting Apple for assistance by going to https://expresslane.apple.com, then click See All Products and Services>iTunes>iTunes Store>Passwords & Security Questions>Lost or Forgotten Apple ID password. They should be able to explain what's going on and help you reset the password for the old ID if necessary. The call should be free.
-
The sound often fails on my new PowerBook Mac Retina and a restart is necessary. How to fix this?
The sound often fails on my new MacBook Pro/ Retina and a restart is necessary. How to fix this?
Try a PRAM reset:
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip. I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?
This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
(PS Everybody please make noise on this one so apple comes up with a solution.)
< Edited by Host > -
I've set up a new iMac and transferred my library. Now, when I switch on iTunes Match it gets to about 25% on stage 1 and just stops working, Anyone know how to fix this?
Ok, so the likely cause is 1 or more Songs are tripping up iTunes Match. To resolve, move to Song view, switch on iCloud Status and iCloud Download fields - sort the view on iCloud Status - identify Songs with status other than Purchased, Matched or Uploaded. Temporarily remove them from the library, allow iTunes Match to complete the 3-step process. Gradually import the Songs back in - any that cause a repeat failure, place in a playlist, burn to audio CD and import as 256k AAC.
Note: iTunes Match service in UK at present is intermittant, may be worth trying from 1200 tomorrow to give Apple the chance to complete its current updates. -
hi so my payment was declined in itunes store and i dont know how to fix this problem,but all details entered correct....so whats the story?
Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
My background photos in the Family Album theme do not bleed when I put another photo on top of them. Does anyone know how to fix this in iphoto 9?
Can you post a screenshot of what you're seeing on that page? In the meantime try this basic fix: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Happy Holidays -
When I launch I message it freezes my computer and eventually crashes. Any idea how to fix this?
My imessage works with my ipad and iphone but when I launch imessage on my computer, it just freezes the computer and then eventually crashes. Any idea how to fix this?
Thanks!My imessage works with my ipad and iphone but when I launch imessage on my computer, it just freezes the computer and then eventually crashes. Any idea how to fix this?
Thanks! -
HT4858 Photos stopped uploading to Photo Stream on PC in September 2013. How to fix this?
I have no where near reached limits. Under 1000 photos. The photo stream works OK on my iPad and iPhone, but has stopped uploading to my PC. It worked fine until sometime in September of this year. All the settings are correct according to other help articles I have read. Does anybody have any ideas how to troubleshoot this problem and get it to work again. Thanks.
Photo stream photos only remain in iCloud for 30 days, even though your last 1000 photos will remain on your iOS devices until deleted. When you turn photo stream off then back on you will only receive photos from the last 30 days as older photos are no longer there.
If you want to stream older photos to your computer, you'll have to add them to a shared photo stream and invite yourself as a subscriber, as explained here: http://help.apple.com/icloud/#/mmc0cd7e99. Or, you could use an app like PhotoSync to transfer them to your PC over your wifi.
Maybe you are looking for
-
Required the Gross and Net weight
Hi to All, Please help me on how to config or reqired the Gross weight and net weight in creation of material master in tcode MM01 (Sales: General/Plant) Thanks, Ermin D. Concepcion
-
Facebook Apps on Windows 8.1 not working
Hi guys, I using Windows 8.1 Pro 64bit. But install apps Facebook not working. Although I did enter account and try again several times. I did not detect any errors in the process used Windows. Please check the error and ask for help. Thank you Regar
-
Reports 11g: REP-50125: rwbuilder.conf:java.lang.NullPointerException
Hello all, Please excuse my being too detailed. After installing Forms 11g, Reports 11g in a new Windows 7 Professional 64bit machine, I was able to run both the Forms Builder and Reports Builder. I then moved my forms and reports into a different fo
-
Decommissioning a domain controller - Possible Scenarios
Hello, I am in the process of upgrading my window server 2003 to 2012 R2. I have introduced a swing DC,installed 2012 on it,ensured that replication is occuring between the two and succesffully transfered the roles from the old DC to the new temporar
-
T410s to 64bit (4GB ram) - Order recovery media or custom installation?
Hello. I just bought a T410s with 4GB but as it came with 32bit Windows 7 Pro, I can only use 3GB.I need the whole amount of memory so I need to upgrade to 64 bits. The main question .Is the cost logical to go for a recovery media through Lenovo Supp