HT201320 Hi I have iPad mini and I don't have head phone for my iPad mini when I received my delivery , so please look in to it . Thanks SHAAN
Hi my name SHAAN Hussain and I got mini iPad , I bought it through my company with monthly installment ,when I received I have got head set in my iPad ,you don't send with the pack,now I found my friends got it ,
<Personal Information Edited by Host>
The iPads do NOT include headphones when purchased. They only come with the power cable (Lightning or 30-Pin, depending on model), the power brick and a measly half-sheet manual. Only the iPhones and iPods come with the Earbuds. So you will have to purchase them separately.
Full iPad Manual (if it came with iOS 7): http://manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf
Full iPad Manual (if it didn't come with iOS 7): http://manuals.info.apple.com/MANUALS/1000/MA1659/en_US/ipad_ios6_user_guide.pdf
Similar Messages
-
Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.
As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
I have a ipad air and i don´t have the icon of the airplay. I don´t have an apple tv but i want use an app to play the screen of the ipan on pc. I already try but definitely i only have the airdrop icon.
The AirPlay feature is only available whe you have an Apple Tv. You can mirror the display form your iPad if the iPad and Apple Tv are both connected to the same WPA (or the same Wi-Fi). Air Drop is a way of sharing files, such as pictures, PDFs, and text documents. Hope this helps.
-
HT1212 I don't know my passcode for my iPad mini and I don't have access to a computer what do I do
I recently changed my passcode on my iPad mini and forgot what it was and I don't have access to a computer to hook it up to iTunes so what do I do?
Do you have find my iPhone enabled on it? If you do, you could log in to your www.icloud.com account in a web browser on any computer and execute a remote erase command (or use the find my iphone app on another iOS device). Then, restore from your iCloud backup (assuming you have that enabled as well and have an iCloud backup file in place to restore from).
-
I have a macbook pro and i reformat my laptop. I don't have many of the appictons or even icloud no more. How do I get all these back in?
Your signature says you have 10.6.8 - is this correct? There is no iCloud on 10.6.8 - if you had upgraded to Lion, but then reformatted and used the disks which came with your Mac you would have installed an older system, presumably 10.6.8? You will need to go through the upgrade process again to get Lion, so that you can access iCloud.
As to the apps, those which were not part of the installed system (such as Mail, Safari, etc.) will have to be reinstalled either from the original installers or a backup, and your actual files will have to be restored from a backup. -
HT204389 I have the 4s and I don't have siri.
it is not under Settings/general and my update is iOS 6.1.3. Language is set at english, Region is set at United States (I'm also in the U.S.). any help?
Verify you have an iPhone 4S with this Model Identifier Utility.
-
My Ipad mini is displaying , ipad is disabled, I don't have access to iTunes and would like to get my ipad working again, how do I do this?
Thank you. I did exactly what you suggested... I called Apple directly and they walked me through the entire process and I could. It have been more pleased with the service they provided!!!!
-
Help, somebody has turned the restrictions on on my daughters iPad mini and we don't know the pass code to turn it off. She can't use iTunes because of them being turned on. I have tried backing it up to a laptop and then restoring it to factory settings but you need the pass code to do this....any ideas how I can turn it off or reset it, anything that might help its driving me potty...
Many thanks
JoRecovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
Hi. I just bought new Ipad Mini. I don't have network to connect to. Its my first owning one i don't know how to set it up. Help...
FYI
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
Cheers, Tom -
I have the original iPad and I don't have an option in Settings, General for Software Upates. The App Store only has a Spanish version. Does anyone know how I can update to iOS 5?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
Hi, Joann
JustAnswer has asked me to answer your question -- "I have iPad 2 and I don't see the little box at top in safari with the number on it that I can tap to get to my open pages
On iPad 1 it was next to the little open bookNot with iOS 5 no. A number of other people have made the same comment about it, so you could try leaving feedback like some of them will have done, and maybe in a future iOS update we'll get the choice : http://www.apple.com/feedback/ipad.html
-
I have an iPad 1 and after I got the latest update for keynote and Now it crashes every time I try to open it
Do you have iOS 5.1.1 on your original iPad? If not update the iOS.
You might also try quitting the app and then reset the pad.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Still no joy? Delete the Keynote app, reset the iPad and then reinstall Keynote. You will not have to pay for downloading it again. -
I cannot open my Ipad, maybe it got stacked up. The iMessage was accidentally opened and I don't have a password for it in order to open. I cannot even slide it to open. What shall I do?
Try resetting your iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
I have 2 iPhones sharing an apple ID (mine and my partner). we have just created separate ID's now that family sharing is available. but the partner's ID wouldn't let her update apps purchased on my ID! Help Please
This is happening to me also but only with certain apps. The message I get with the apps that won't update is "Update Unavailable with This Apple ID. This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled".
-
I have Ipad 2 and i use find my i phone naw is lookd i trau to activation by same Apple Id but i can't what i can do
http://support.apple.com/kb/HT5787
Maybe you are looking for
-
BeeKeeper Install Issue | On RH Linux
Hi I am trying to setup Beehive1.4.3 on RedHat Linux. My Beehive server installation went on fine. But after that the Beekeeper installation has run into some issue. Below are the logs containing the error message. I dont know much about linux OS but
-
Can anybody send me the standard sales order please if it is possible send me code? I am ABAP fresher want to analze the standard and the new sales orders tht is possible for createing Points will be rewarded. Thks
-
To stop all scheduling in Business Objects 4.0
Hi I just want to stop all the scheduled reports to run in Business Objects Which process should i stop for it ? Is it Adaptive Job Processor? This is why i need it We have migrated our BO from 3.1 to 4.0 in UNIX environment so its a prod parallel en
-
Can i use IDOCs , to get the data from the Presentation Servers , and the same program can be scheduled background............... if possible please give in details how to do.. Thankyou Bhaskar
-
Table name from which to extract bank name and swift code by key field as vendor code
Please help with the table name from which we can extract the bank name and swift code of vendors with the key input as vendor numbers