HT201840 Hi, Could i connect a JBL audio and here by the 2 ways, jbl and original sound of the mac, tks...
Hi, Could i connect a JBL audio and here by the 2 ways, jbl and original sound of the mac, tks...
JBL makes many different speakers. And there are many different kinds of iMac PPC. The G5 has mini-Toslink audio (supporting up to 5.1 DTS sound), and the G4 has a special digital audio port for which most speakers don't have an adapter. Apple though did make some globe like speakers to put on either side of that iMac that connected via that digital audio port.
Otherwise you are left with line-level output through the headphone port of the iMac G4 or G3, which means you need amplified speakers and standard minijack RCA connector.
Similar Messages
-
my iphone says 'iphone is disabled connect to itunes' and when i do connect it, it says 'iphone could not connect to itunes because it is locked with a password and you need to unlock it but it doesnt let me as it is diabled???????
hi, may i know how to restore and put it on recovery mode??
as I faced the same problem as you now...
Thanks -
have a Comcast system and am going through a Bose amp for sound. The comcast box has an HDMI port which I've used for the Apple TV connection. Nothing works! Help.
Thanks. Thought that would be the solution but for my wall mounted TV it's going to be a problem but many thanks for your reply.....
-
When using Mail Connection Doctor two error messages come up with regards to sending and receiving mail from my @mac.com account.
The first one says that my @mac.com account: "Could not connect to this MobileMe IMAP server." How do I fix this? Is this caused by the way I have set my preferences? Is this related to joing iCloud? Or my ISP Verizon the problem?
The second one says in reference to my Apple Server: "Could not connect to this STMP server. Check your network connection and that you entered the correct information in the Account perferences. Also verify that the server supports SSL. If it does not, deselect the "Use SSL checkbox in the Advanced tabe of Account preferences." This box was not checked. Two days ago these problems did not exist. Again, how do I figure out who to discusses these problems with?
Feedback is most welcome.
SallyHello:
This may help....
http://www.apple.com/mobileme/transition.html
Barry -
My iphone 3gs will no longer let me try passcodes and it only says "Iphone is disabled connect to itunes" well, when I connect it to my laptop, itunes says "could not connect to phone because it is locked with a passcode. you must enter your passcode on the iPhone before it can be used with iTunes" Please help!!! I have tried resetting it and all the tricks I know. Nothing works. Thanks
You will have to restore it from Recovery Mode: http://support.apple.com/kb/HT1808
-
I updated to itunes 7.02 yesterday and now I have no audio. The side switch says mute or headphones. How do I listen to anything without headphones?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
Cheers, Tom -
and i cant restore because my music and stuff are not on itune because i restored my computer
Turn your iPhone to a DFU mode and restore it
-
itunes wont completly download and install. it starts downloading goes thru most of the download then a pop up error message says itunes couldnt be configured and tells me to press finish and it closes
how do i get itunes to completely install??a pop up error message says itunes couldnt be configured
I'd like to have a closer look at that error message please.
Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply. -
I've recently upgraded to the new software (5.1), since then the iTunes doesn't recognize my iphone, as the error comes up:' iTunes could not connect to this iPhone because an unknown error (ex8000022).
Are you guys facing the same problem?
Let me know your opinions, solutions and even problems.
Thank You !http://support.apple.com/kb/HT4137
How to restore as new.
and this for itunes message
http://support.apple.com/kb/HT1808 -
Could not connect to oracle OLAP
Hi
when i connect to Disco. Plus for "OracleBI Discoverer for OLAP" and Database as "localhost:1521:orcl" i got this message:
"D40-Could not connect to oracle OLAP"
so i run a Quick Diagnosis and i got this report:
JDK version = 1.4.2_04
BI Beans internal version = 3.2.1.0.13
Discoverer Plus OLAP version = 10.1.2..07.59
Discoverer Version = 10.1.2.45.46c
Connect to database = successful
JDBC driver version = 10.1.0.3.0
JDBC JAR file location = \localhost\disco\plus_files\d4o_double.jarjar
Database version = 10.1.0.4.0
OLAP API Server version = 10.1.0.4.0
OLAP AW Engine version = 10.1.0.4.0
OLAP Catalog version = 10.1.0.4.0
BI Beans Catalog version = N/A; not installed in younis
Discoverer Catalog version = N/A; not installed in younis
Authorized for Discoverer Plus OLAP = No!
OLAP API JAR file version = 9.2
OLAP API JAR file location = \localhost\disco\plus_files\d4o_double.jarjar
Load OLAP API metadata = Successful
Number of metadata folder = 1
Number of metadata measures = 3
Number of metadata dimensions = 4
Thanks
YounisI think you forgot grant OLAP_USER, D4OPUB role to younis
Make sure D4OSYS user is created. D4OSYS is the owner when the Discoverer OLAP catalog is created.
Make sure the OLAPSYS user and OLAP_USER/OLAP_DBA role is created in order to grant D4OPUB. You might need to run $ORACLE_HOME\olap\admin\olap.sql to create those accounts eventhough you have OLAP option installed.
I found directly install latest Oracle database patchset (10.1.0.4) and then create database doesn't have those accounts automatically, unless you are upgrade from 10.1.0.3.
Hope this can help -
D40-1015 Could not connect to Oracle OLAP
Hello,
I have installed new 10g R2 database on Sun Solaris 64 bit, When I access the discoverer I am getting this 'D40-1015 Could not connect to Oracle OLAP' error. I have installed OLAP and XDB everything.
How do I recover from this error, any idea would be greatly appreciated.
FYI,
OracleBI Discoverer
Diagnose Connection
BI Beans Catalog Version....=N/A; not installed in uv
Discoverer Catalog version....=N/A; not installed in uv
Thanks,Hi,
Did you install the Discoverer catalog and authorize users? (see the Configuration Guide)
Regards -
Itunes could not connect to itunes store - an Unknown Error Occured (502 )
PLEASE HELP !!!!!
For the last 3 days I have been trying to login to the itunes store, but have recieved the message "Itunes could not connect to itunes store - an unknown error occured (502)" each and every time. Can someone please tell me why this is happening and what I can do to fix the problem. I would really like to download some games onto my Ipod, but am having no luck.
Thanks
Elizabeth
Windows XPI have been getting the "cannot access" result for several days, even trying again repeatedly throughout the day and night. It may have started after the last Windows security update. I have not changed anything else on my system prior to this happening, nor have either of the ISP's I use. I agree "something" must have changed, but there seem to be a lot of other people experiencing this same problem. If you are one of them, did it start after applying the Windows update?
-
I tried to use the iPhone hot spot feature for the first time to use my kindle outside. I followed the directions n I saw the network came up I used my password and I could not connect. What am I'm doing wrong. Please help
I tried to use the iPhone hot spot feature for the first time to use my kindle outside. I followed the directions n I saw the network came up I used my password and I could not connect. What am I'm doing wrong. Please help
-
I just purchased an Apple TV MD199LL/A, got it connected to my internet. I can go to Youtube and watch videos. I'm able to access Netflix. All seems well except I cannot connect to my iTunes account. I have gone through the list - home sharing is set correctly on both iTunes and my Apple TV. The userid is correct on both.
Message "Loading prodrigu's library" and then "Could not connect to prodrigu's library".
I had this same problem when I installed the REMOTE application on my ipad. Everything on the list was affirmative, but had the same problem not being able to connect to my iTunes.
What is missing? Is there a firewall setting that could be causing this?I don't mean to be facetious but sometimes the simplest things are overlooked. To connect to your library you have to have the computer where the iTunes library is located running and with iTunes open. It also needs to be on the same network. My network is dual band and works with either stream but a friend of mine does not. He has to set the computer and the Apple TV to the same band. Hope this helps.
-
Ok, so I completely feel like this is a stupid question for those of you already in the know and recording tracks onto your Computers DAW from instrument apps on the iPad and other i devices. I can not seem to find out exactly what connector or unit I need to be able to connect and use my ipad as a instrument to record tracks onto logic. I have an ipad2 that I want to connect to my apogee duet 2 interface which is obviously connected to my Mac. I know Logic comes with plenty of drum and synth options but I still want to be able to use beatmaker, jam up pro and the sunrizer synth apps on some of my tracks. I do have the camera conversion adaptors. So my question is, do I just run from the camera adapter in the ipad into the midi port on my apogee interface? (I'm new to and still learning about midi) Or is there a special 30 pin cable I need to get that runs from the ipad into the XLR or quarter inch in the break out cables on the apogee? I did find one cord out there that plugged into the ipad and had left and right XLR connectors but my duets break out cable only has two inputs each is their own channel. Also , if the cable I need isn't midi and does connect to the breakout cables, do I set it as an instrument or as a mic in the apogee software? Or am I completely way off base and needing something different all together. Any help would be much appreciated!
I have a fare amount of experience when it comes to recording, set up and the flow of standard instruments, using external hardware and plugins. But the last few weeks I spent a lot of time programming some great beats in beatmaker on my ipad and I want to track them into Logic. It seemed like no matter how I worded the questions when researching what I thought was and should be simple to figure it out, it just took me to answers I wasn't looking for. Thank you ahead of time. Like I said I'm just starting to get out of my comfort zone and learn about midi and the more digital side of things. So sorry about any ignorance concerning that side of things.The new Apogee Duet for iPad and Mac, is compaible with iOS devices and includes a USB Midi input. This sounds like the perfect solution for your workflow.
Maybe you are looking for
-
Exporting Classical Report to Excel
Hi, I have a classical report in which I am adding a Button "Export to Excel". Now, if I click that button, I should be able to export my Classical Report to excel. Can somebody please help me on this. Thanks, Venkat.
-
WARNING: Serious bug in Netscape 6.01 browser
All-- I've just been bitten by a serious bug in the Netscape 6.01 browser, and want to let you know about it before it bites you too. Full bug details can be found at http://bugzilla.mozilla.org/show_bug.cgi?id=55055 A short summary is that the back
-
Hi, I will explain my question by the following example: A customer buys some things in your store, you fill this in in your APEX-page (that stores the entered data in your database). If everything is entered, I want to make an invoice based on the d
-
Emails to me from some people are bouncing with the message "Mail server for "verizon.net" unreachable for too long" When the email is resent, it finally gets through, but this is a pain. I talked to 2 different verizon techs and both say all my se
-
Skype can't connect - How to get a refund?
I've spent hours going thru every post and recommendation (and there are a ton!) for the error message "Skype can't connect" and I STILL cannot connect (yes, I have the latest/only version; yes, my system requirements are met; yes, internet connectio