HT203175 4002 Error
When launching iTunes I get a 4002 error. What does that mean?
I'm in the same boat. I use my iphone for everything, including the music for my Zumba classes, and right now I can't see the music on the iPhone at all. May have to go back to using my old iPhone 3 for my classes, not cool! If anyone can offer up any results, please let me know.
Add on: the last time I was able to get it to work, it didn't run through completely and left alot of my songs out. They were showing up there, but I couldn't access them because they had not been "added to the cloud", they were showing a status of "waiting. Any ideas on that?
Similar Messages
-
Can not access itunes store reads error 4002 -error in itunes store
CAN NOT ACESS ITUNES STORE. GET THE FOLLOWING MESSAGE. ERROR 4002- ERROR IN ITUNES STORE PLEASE TRY AGAIN LATER
Hey Caretaker,
I'd take a look at the following article that goes over the basic troubleshooting for being unable to access the iTunes Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Hope that helps,
David -
Replace collection [TOPLINK-4002] error
Hi all!
I've a 1:N relationship.
I need to replace the objects in the collection.
I've used the following code:
if (distretti != null) {
//create new list
usrlgdistretti=new ArrayList(distretti.size());
it = distretti.iterator();
//add elements to list
while (it.hasNext()) {
Tbdistretti dist=(Tbdistretti)unofw.registerObject(it.next());
if(dist!=null){
Usrlgdistretti uld=(Usrlgdistretti)unofw.registerObject(new Usrlgdistretti());
uld.setDistretti(dist);
uld.setTdbuser(user);
usrlgdistretti.add(uld);
//change the collection
user.setUsrlgdistrettiCollection(usrlgdistretti);
but, if I try to replace the collection [object A, object B] with the collection [object B, object C], i get an [TOPLINK-4002] error, caused by object B and the UNIQUE constraint.
do I need to use "performDeleteFirst" of unitofwork?
can you please help me?
thanks!Replacing the collection is fine. The rule of thumb though is that the objects in the new collection should be working copies retrieved from the database and registered with the UnitOfWork. If ObjectB was an existing working copy you would not see and INSERT attempted for it.
Instead of simply creating new instances for the target collection you need to see if you can retrieve existing elements to use.
Doug -
What causes the 4002 error in iTunes?
I keep getting the unknown 4002 error, what causes this and how do I fix it?
I have received a 4001, 4002, and 4010 error numbers. I cannot find anything from Apple that describes each of them and what the difference is. And, of course, I cannot find anything from Apple Inc. that tells us how to resolve it or when they will fix it.
All I do know is iTunes Match is broken and does not work. I also know I cannot listen to my songs that are in the cloud, so what good did it do me for Apple Inc. to build server farms all over the place? None that I can tell.
I have resurrected a long-put away iPod to listen to my music because the songs are on a hard drive, not some cloud-like thing. And this I also know: I will never buy another Apple product again. They have become too big, too arrogant, too corporate-centered, and far too selfish since Steve Jobs left the company.
Good bye, Apple Inc. -
HT1338 How do i fix a 4002 error
Each time I run ITUNES MATCH I get a 4002 error. How do I fix it.
Google search for itunes error 4202 should help. I don't iTunes stuff.
-
While scheduling I am getting the Exception [TOPLINK-4002] Error
Dear All,
While scheduling I am getting the following Error
Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: No more data to read from socketError Code: 17410 Call:UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 1 WHERE SEQ_NAME = 'SUBSCRIPTION_ID_SEQ' Query:DataModifyQuery()
Error Detail
I am Using BI Publisher 10.1.3.3.1Yes, Please I need your support
I have this issue related to this subject.
But I have two databases Oracle 10g release 2 and the toplink have thi url jdbc
jdbc:oracle:thin:@
(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 10.33.12.38)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.33.12.39)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MITDB)
(FAILOVER_MODE =(TYPE = SELECT)(METHOD = BASIC)(RETRIES = 180)(DELAY = 5))
for connecting two databases, now when i try to submit button this message was thrown, i need to apply RAC
[TopLink Warning]: 2008.03.24 06:56:40.101--ClientSession(27665811)--Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: No more data to read from socketError Code: 17410
Call:UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 1 WHERE SEQ_NAME = 'IND_REG_REQ_SEQ'
Query:DataModifyQuery()
[TopLink Warning]: 2008.03.24 06:56:40.101--ClientSession(27665811)--Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: OALL8 is in an inconsistent state.Error Code: 0
Call:SELECT SEQ_COUNT FROM SEQUENCE WHERE SEQ_NAME = 'IND_REG_REQ_SEQ'
Query:ValueReadQuery()
[TopLink Warning]: 2008.03.24 06:56:40.101--ClientSession(27665811)--Exception [TOPLINK-4011] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Exception Description: Error preallocating sequence numbers. The sequence table information is not complete.
[TopLink Warning]: 2008.03.24 06:56:40.101--ClientSession(27665811)--Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: Io exception: Software caused connection abort: socket write errorError Code: 17002
Call:UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 1 WHERE SEQ_NAME = 'MITREQUEST_SEQ'
Query:DataModifyQuery()
[TopLink Warning]: 2008.03.24 06:56:40.101--ClientSession(27665811)--Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: Closed ConnectionError Code: 17008
Call:SELECT SEQ_COUNT FROM SEQUENCE WHERE SEQ_NAME = 'MITREQUEST_SEQ'
Query:ValueReadQuery()
[TopLink Warning]: 2008.03.24 06:56:40.101--ClientSession(27665811)--Exception [TOPLINK-4011] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Exception Description: Error preallocating sequence numbers. The sequence table information is not complete.
[TopLink Warning]: 2008.03.24 06:56:40.101--ClientSession(27665811)--Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: Closed ConnectionError Code: 17008
Message was edited by:
Mohammed Amr. -
Security 090398 Invalid Subject and TOPLINK-4002 error.
Hi,
I am running a soa application with SOA 11g and keep getting below exceptions from soa weblogic admin console. I can still run the application but don't know how to clean the error. any suggestions how to fix the issue? Thanks in advance.
Call: SQLCall(INSERT INTO COMPOSITE_INSTANCE_FAULT (ID, COMPOSITE_INSTANCE_ID, B
R_CATEGORY, UNIQUE_ID, BINDING_TYPE, CPST_PARTITION_DATE) VALUES (?, ?, ?, ?, ?,
Query: InsertObjectQuery(oracle.integration.platform.instance.CompositeInstanceF
[TopLink Warning]: 2011.07.26 16:17:05.729--ClientSession(99855179)--Exception [
Internal Exception: java.sql.SQLException: java.lang.SecurityException: [Securit
Error Code: 0
####<Jul 26, 2011 3:38:07 PM EDT> <Error> <oracle.integration.platform.instance> <DRSSBRA2913> <AdminServer> <weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@3ac9b3c> <Tksmau5l3NSXhDfOeb7L7ubmyW6lsKrbQVo8ckt0> <> <e893b723eb6fbe4f:-3bb14c3b:13157b3753d:-8000-000000000001b6fa> <1311709087384> <BEA-000000> <oracle.integration.platform.instance.store.DOStore$RetryableException: Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.4.0) (Build 101210)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[Tksmau5l3NSXhDfOeb7L7ubmyW6lsKrbQVo8ckt0]
Error Code: 0
at oracle.integration.platform.instance.store.DOStore.put(DOStore.java:179)
at oracle.integration.platform.instance.error.DOObjectExceptionHandler.recover(DOObjectExceptionHandler.java:41)
at oracle.integration.platform.instance.error.FileBackedExceptionHandler.recoverObjects(FileBackedExceptionHandler.java:309)
at oracle.integration.platform.instance.error.FileBackedExceptionHandler.recover(FileBackedExceptionHandler.java:301)
at oracle.integration.platform.instance.error.FileBackedExceptionHandler.run(FileBackedExceptionHandler.java:355)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.4.0) (Build 101210)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[Tksmau5l3NSXhDfOeb7L7ubmyW6lsKrbQVo8ckt0]
Error Code: 0
at oracle.toplink.exceptions.DatabaseException.sqlException(DatabaseException.java:282)
at oracle.toplink.jndi.JNDIConnector.connect(JNDIConnector.java:128)
at oracle.toplink.jndi.JNDIConnector.connect(JNDIConnector.java:84)
at oracle.toplink.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:153)
at oracle.toplink.internal.databaseaccess.DatasourceAccessor.connectInternal(DatasourceAccessor.java:273)
at oracle.toplink.internal.databaseaccess.DatabaseAccessor.connectInternal(DatabaseAccessor.java:231)
at oracle.toplink.internal.databaseaccess.DatasourceAccessor.reconnect(DatasourceAccessor.java:478)
at oracle.toplink.internal.databaseaccess.DatabaseAccessor.reconnect(DatabaseAccessor.java:1347)
at oracle.toplink.internal.databaseaccess.DatasourceAccessor.incrementCallCount(DatasourceAccessor.java:251)
at oracle.toplink.internal.databaseaccess.DatasourceAccessor.rollbackTransaction(DatasourceAccessor.java:580)
at oracle.toplink.internal.databaseaccess.DatabaseAccessor.rollbackTransaction(DatabaseAccessor.java:1406)
at oracle.toplink.internal.sessions.AbstractSession.basicRollbackTransaction(AbstractSession.java:369)
at oracle.toplink.threetier.ClientSession.basicRollbackTransaction(ClientSession.java:135)
at oracle.toplink.internal.sessions.AbstractSession.rollbackTransaction(AbstractSession.java:3003)
at oracle.toplink.internal.sessions.UnitOfWorkImpl.rollbackTransaction(UnitOfWorkImpl.java:4486)
at oracle.toplink.internal.sessions.UnitOfWorkImpl.rollbackTransaction(UnitOfWorkImpl.java:4507)
at oracle.toplink.internal.sessions.UnitOfWorkImpl.commitToDatabase(UnitOfWorkImpl.java:1384)
at oracle.toplink.internal.sessions.UnitOfWorkImpl.commitToDatabaseWithChangeSet(UnitOfWorkImpl.java:1427)
at oracle.toplink.internal.sessions.UnitOfWorkImpl.commitRootUnitOfWork(UnitOfWorkImpl.java:1173)
at oracle.toplink.internal.sessions.UnitOfWorkImpl.commit(UnitOfWorkImpl.java:945)
at oracle.integration.platform.instance.store.DOStore.put(DOStore.java:176)
at oracle.integration.platform.instance.error.DOObjectExceptionHandler.recover(DOObjectExceptionHandler.java:40)
at oracle.integration.platform.instance.error.FileBackedExceptionHandler.recoverObjects(FileBackedExceptionHandler.java:308)
... 5 more
Caused by: java.sql.SQLException: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[Tksmau5l3NSXhDfOeb7L7ubmyW6lsKrbQVo8ckt0]
at weblogic.jdbc.common.internal.JDBCUtil.wrapAndThrowResourceException(JDBCUtil.java:259)
at weblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiDataSource.java:352)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:369)
at oracle.toplink.jndi.JNDIConnector.connect(JNDIConnector.java:123)
... 26 more
Caused by: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[Tksmau5l3NSXhDfOeb7L7ubmyW6lsKrbQVo8ckt0]
at weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:833)
at weblogic.security.service.IdentityUtility.authenticatedSubjectToIdentity(IdentityUtility.java:30)
at weblogic.security.service.RoleManager.getRoles(RoleManager.java:183)
at weblogic.security.service.AuthorizationManager.isAccessAllowed(AuthorizationManager.java:375)
at weblogic.jdbc.common.internal.JDBCUtil.checkPermission(JDBCUtil.java:231)
at weblogic.jdbc.common.internal.ConnectionPool.doAuthorizationCheck(ConnectionPool.java:443)
at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:344)
at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:324)
at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:94)
at weblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiDataSource.java:350)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:369)
at oracle.toplink.jndi.JNDIConnector.connect(JNDIConnector.java:123)
at oracle.toplink.jndi.JNDIConnector.connect(JNDIConnector.java:84)
at oracle.toplink.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:153)
at oracle.toplink.internal.databaseaccess.DatasourceAccessor.connectInternal(DatasourceAccessor.java:273)
at oracle.toplink.internal.databaseaccess.DatabaseAccessor.connectInternal(DatabaseAccessor.java:231)
at oracle.toplink.internal.databaseaccess.DatasourceAccessor.reconnect(DatasourceAccessor.java:478)
at oracle.toplink.internal.databaseaccess.DatabaseAccessor.reconnect(DatabaseAccessor.java:1348)
at oracle.toplink.internal.databaseaccess.DatasourceAccessor.incrementCallCount(DatasourceAccessor.java:251)
at oracle.toplink.internal.databaseaccess.DatasourceAccessor.rollbackTransaction(DatasourceAccessor.java:580)
at oracle.toplink.internal.databaseaccess.DatabaseAccessor.rollbackTransaction(DatabaseAccessor.java:1407)
at oracle.toplink.internal.sessions.AbstractSession.basicRollbackTransaction(AbstractSession.java:369)
at oracle.toplink.threetier.ClientSession.basicRollbackTransaction(ClientSession.java:135)
at oracle.toplink.internal.sessions.AbstractSession.rollbackTransaction(AbstractSession.java:3003)
at oracle.toplink.internal.sessions.UnitOfWorkImpl.rollbackTransaction(UnitOfWorkImpl.java:4487)
at oracle.toplink.internal.sessions.UnitOfWorkImpl.rollbackTransaction(UnitOfWorkImpl.java:4508)
at oracle.toplink.internal.sessions.UnitOfWorkImpl.commitToDatabase(UnitOfWorkImpl.java:1385)
at oracle.toplink.internal.sessions.UnitOfWorkImpl.commitToDatabaseWithChangeSet(UnitOfWorkImpl.java:1427)
at oracle.toplink.internal.sessions.UnitOfWorkImpl.commitRootUnitOfWork(UnitOfWorkImpl.java:1173)
at oracle.toplink.internal.sessions.UnitOfWorkImpl.commit(UnitOfWorkImpl.java:945)
at oracle.integration.platform.instance.store.DOStore.put(DOStore.java:176)
at oracle.integration.platform.instance.error.DOObjectExceptionHandler.recover(DOObjectExceptionHandler.java:41)
at oracle.integration.platform.instance.error.FileBackedExceptionHandler.recoverObjects(FileBackedExceptionHandler.java:309)
... 5 more
>
Regards,
Kelvin.I had the same issue, it got resolved after closing the Context in finally block
-
Hello there people! Does anyone know what on earth that balsted error code 4002 means when you go to update iTunes Match!
Hi Micklow,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Cheers,
- Judy -
4002 error in itunes since 10.7 update
Does anyone know how widespread the problem is or what timeframe apple has for fixing it?
I'm in the same boat. I use my iphone for everything, including the music for my Zumba classes, and right now I can't see the music on the iPhone at all. May have to go back to using my old iPhone 3 for my classes, not cool! If anyone can offer up any results, please let me know.
Add on: the last time I was able to get it to work, it didn't run through completely and left alot of my songs out. They were showing up there, but I couldn't access them because they had not been "added to the cloud", they were showing a status of "waiting. Any ideas on that? -
...how do I resolve this issue? It's irritating for several reasons:
1) My new songs do not appear in match on my other devices because of this error
2) My itunes turns itself on automatically when it knows it needs to match; then the icon starts jumping up and down when the error occurs, distracting me from whatever I'm doing about ever 15 minutes at times.
3) I've paid for this. It's working so badly.Found a potential solution here:
https://discussions.apple.com/thread/4332757
Gsleeroy
Re: error 4002 in itunes match do you have a solution?
Sep 23, 2012 10:08 AM (in response to matracaelcan)
Hi All,
I had this problem today myself, and was frustrated repeatedly by the '4002' error.
I have literally just fixed the issue by doing the following steps:
1: Go to the 'Store' tab and select 'Turn Off iTunes Match'
2: Return to the 'Store' tab and select 'Update Genius'
3: Wait for this to complete succesfully, the return to the 'Store' tab once more and select 'Turn On iTunes Match'.
4: iTunes Match will now go through the motions and should succeed!
I hope this helps -
I continue to receive message that "We could not complete your iTunes Store request. An unknown error occurred (4002). Please try again later." This has been happening every time iTunes Match runs in background. Any suggestions for a cure?
Found a potential solution here:
https://discussions.apple.com/thread/4332757
Gsleeroy
Re: error 4002 in itunes match do you have a solution?
Sep 23, 2012 10:08 AM (in response to matracaelcan)
Hi All,
I had this problem today myself, and was frustrated repeatedly by the '4002' error.
I have literally just fixed the issue by doing the following steps:
1: Go to the 'Store' tab and select 'Turn Off iTunes Match'
2: Return to the 'Store' tab and select 'Update Genius'
3: Wait for this to complete succesfully, the return to the 'Store' tab once more and select 'Turn On iTunes Match'.
4: iTunes Match will now go through the motions and should succeed!
I hope this helps -
An unknown error occurred (4002).
Been getting this all morning when trying to update iTunes Match, tried logging out and back in, restarting iTunes, nothing. Using iTunes 10.7 on a MacBook Pro...
Anyone else with this issue?Hi, Keely
Your note really helped me. But when I tried to update Genius I got the error 4002 error message again. So maybe the best procedure (for people who have this additional problem) is to add a step. This worked for me!
Store > Turn off iTunes Match
Store > Turn off Genius
Store > Update Genius (let it run + finish)
Store > Turn on iTunes Match (set it going and it should work properly) -
Captivate freezing Error Message
Hi,
Captivate continues to freeze randomly through projects. I get the error "A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files. Please restart Adobe Captivate." I restart, yet I continue to face this error. This has happened to me 3 times already and it's very frustrating. I basically have to start over on my projects. My projects are saved to My Documents folder. I've tried clearing the cache.
I went through uninstalling and reinstalling Captivate but I got this error message after it finished: This is on a Windows 7 pc.
Exit Code: 6
-------------------------------------- Summary -------------------------------------
- 0 fatal error(s), 3 error(s), 3 warning(s)
----------- Payload: {948B7277-3D4C-4672-B1DB-24B3C83D704E} MultiSCOPackager 2.0.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Common Files\Adobe\Adobe Multi SCO Packager 2\MultiscoPackager.ico for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe eLearning Suite 2.5\Adobe Multi SCO Packager 2.lnk with target C:\Program Files (x86)\Common Files\Adobe\Adobe Multi SCO Packager 2\MultiSCOPackager.exe(Seq 980)
----------- Payload: {F9FAC696-2E48-497D-B820-C9A65DA630DF} Adobe eLearning Suite 2.5 2.5.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Common Files\Adobe\Adobe eLearning Suite 2.5 Workflows\en_US\win\extras\SuiteWorkflows\en_US\els_app.icofile:\\\D:\suiteBuild\elearnin g_mul\installerdev\elearning\project\stagingarea\win\extras\SuiteWorkflows\en_US\els_app.i co8632405c9a6d2fbac0fe79597739b3b85a6e898_98_05c9a6d2fbac0fe79597739b3b85a6e8 for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe eLearning Suite 2.5\Adobe eLearning Suite 2.5 Workflows.lnk with target C:\Program Files (x86)\Common Files\Adobe\Adobe eLearning Suite 2.5 Workflows\en_US\Main.exe(Seq 283)
----------- Payload: {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10} Adobe Captivate 5.5 5.5.0.0 -----------
WARNING: DF012: File/Folder does not exist at D:\Adobe eLearning Suite 2.5\payloads\AdobeCaptivate5.5Core\OEM(Seq 4002)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Captivate Reviewer: Install failed
ERROR: DW050: - Adobe Captivate Quiz Results Analyzer: Install failed
I've done google searches and I need some help from Adobe.
Thank you,
LoganExit Code 6 means that some of the supporting components for the application are not installed correctly.
Reason : may be they are already installed on your machine or they didnt got uninstalled when you tried to uninstall the application last time.
Try launching the application, it should work.
now for the error that you get with the project.
Please try to create a test project and see if you get the same error on that project as well.
if you do not get this error with the new test project, then try to copy all the slides of the original project into a new blank project, save it with a different name and then check.
Thanks -
My Itunes won't let me Redeem My card It says "We could not complete your iTunes Store request. An unknown error occurred (-1202). Please try again later." I need help please
Found a potential solution here:
https://discussions.apple.com/thread/4332757
Gsleeroy
Re: error 4002 in itunes match do you have a solution?
Sep 23, 2012 10:08 AM (in response to matracaelcan)
Hi All,
I had this problem today myself, and was frustrated repeatedly by the '4002' error.
I have literally just fixed the issue by doing the following steps:
1: Go to the 'Store' tab and select 'Turn Off iTunes Match'
2: Return to the 'Store' tab and select 'Update Genius'
3: Wait for this to complete succesfully, the return to the 'Store' tab once more and select 'Turn On iTunes Match'.
4: iTunes Match will now go through the motions and should succeed!
I hope this helps -
I keep getting a "server error" and sometimes a 4002 error when I try to get the track names of CDs I'm importing. My Internet connection is working fine. I'm running iTunes 11.0.4(4) on a MacPro. Is there a configuration problem with the latest OS?
Thanks!Sorry for the late reply. I asked our IT department to look into it, but they couldn't determine any cause.
I don't have Firewall turned on for my computer.
I've tried other suggestions, such as turning off iTunes Match, turning off Genius, and turning them all back on, but that didn't work either.
I'm still researching the issue, but so far I'm baffled.
Maybe you are looking for
-
How do i install the lastest version of itunes
How do i install the lastest version of itunes
-
Hello! I'm trying to build a Search help in my program for KURZTEXT field pull up frpm QPGT once and once from QPCT, by adding a form set_f4 to the program and there build a sructure that contain the fields that i have to use to this pull up then i u
-
ALV GRID - how to handle scrollbar click
Hello, Is it possible to handle scrollbar movment/click in alv grid control? Thanks in advance for your help. Harry
-
Strange characters starting to pop up everywhere, why?
so ive been using arch for quite a while now but recently ive noticed something very strange, that never occured before why are theese strange characters showing up all over the place? (in the password box it used to have ******* , now it has YYYYYY
-
Old VAT number remains despite new account not needing VAT number.
I have changed the credit card details for my account for Creative Cloud and paid for a new subscription. However, I was unable to change the VAT number from the previous account details. I am not registered for VAT and want to remove the VAT number.