HT203242 I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?
I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
Similar Messages
-
When opening iTunes, I get the following error message: "The registry setting used by the iTunes drivers for importing an burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
I have reinstalled iTunes twice and still get the message.
Any clues??
Thank you.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
ITunes says registry settings for importing and burning CDs or DVDs are missing.
i get a message after installing itunes 10.7 that registry settings are missing for importing and burning CD/DVDS. Says probably due to installing other burning sofware. Re-install ituenes. I never installed anything between the older 10.6 and the new 10.7........just updated when it said new Apple software was available. The update process seemed to delete the 10.6 install and then re-install a new version of itunes, 10.7. Then the registry settings error message started coming up each time I start itunes. What's the proper way to re-install?
Thanks for any suggestions.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I keep getting this error when I publish the SWF file.
I keep getting this error when I publish my SWF file.
Fonts should be embedded for any text that may be edited at runtime, other than text with the "Use Device Fonts" setting. Use the Text > Font Embedding command to embed fonts.
ReferenceError: Error #1065: Variable TLFTextField is not defined.
And these compiled errors
Symbol 'Symbol 6', Layer 'Layer 1', Frame 1
Warning: The instance name 'staff' is declared on an object of type fl.text.TLFTextField but there is a conflicting use of the instance name 'staff' on an object of type flash.display.InteractiveObject.
Scene 1, Layer 'action', Frame 1, Line 7
1061: Call to a possibly undefined method gotoAndPlay through a reference with static type fl.motion:AnimatorFactory.
Scene 1, Layer 'action', Frame 1, Line 3
1061: Call to a possibly undefined method addEventListener through a reference with static type fl.motion:AnimatorFactory.
This is the only action script 3.0 script that I wrote.
import flash.events.MouseEvent;
skipbtn.addEventListener(MouseEvent.CLICK, btnClick);
function btnClick (event:MouseEvent):void{
skipbtn.gotoAndPlay("home");the first line is a warning, not an error.
and you have more actionscript than you think. open the movie explorer panel and toggle the actionscript only button to find all the actionsript in your fla. -
When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility. Any tips on removing this error message for good?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I get this error when submitting the issue to DPS
Hi am using Woodwing Enterprise to publish folios to the Adobe DPS and it has been okay, I have finished creating of a new issue and I get this error when submitting the issue to DPS : Adobe Distibution Server returned error while calling "createIssue". HTTP code: 401. HTTP message. " Unknown error.". Adobe results message: " Unauthorized for access. See logs for further details." Adobe results status: " UNAUTHORIZED." The DPS account was recently renewed
Please contact gold support about this issue.
-
Everytime I connect my iPod Touch (4th Gen) to my laptop, running Win 7 (64 bit) I get the message "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes" I have reinstalled iTunes several times and it has not fixed the issue. I am running ver 10.2.2.12 of iTunes. I HAVE NOT installed any other burning software to my laptop either. I haven't tried uninstalling iTunes and then re-installing it yet. Would that perhaps fix the problem? I've read that many users have had issues with the new version of the software and I was wondering if that might be causing my issue. I'd like to point out that iTunes seems to work after getting rid of the message, but I haven't tried to burn any CDs or put music from a CD to my laptop. Any ideas on how to get rid of the annoying message?
I also am having trouble hooking up with our other computers using Homegroup. I noticed quite a lot of people are having the same issue and hopefully they come up with a fix for that soon.
Thanks in advance.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters -
I downloaded the latest version and I get this error when I open it. Problem signature: Problem Event Name:
InPageError Error Status Code:
c0000185 Faulting Media Type:
00000003 OS Version:
6.1.7601.2.1.0.768.3. Any clue why or how to fix?InPageError
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get itunes to launch properly afterwards? -
I use an ipod classic 120G. When I try to launch itunes I first of all see a box stating "The registry settings used by itunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall itunes" This I have done. obviously I cannot burn CDs but worse still is my ipod is not being recognised by itunes and will not sync. I have not installed any new burning softeware. Any suggestions please?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I get this error when trying to create a ringtone - iTunes could not connec
I get this error when trying to create a ringtone:
"iTunes could not connect to the iTunes Store - an unknown error occurred (11556)"
But I CAN connect - if I click on the iTunes Store, it connects right away.
I want to make a ringtone from a song that I purchased, but all I get is the same error message.
iTunes 9.2.2, Ireland iTunes Store.have you seen this KB article: http://support.apple.com/kb/HT1398 ?
JGG -
Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.
I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.
-
Keep getting this error when ever I try to use the CC_2014
keep getting this error when ever I try to use the CC_2014 InDesign
Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders. Ensure that you have appropriate permissions and then restart Adobe InDesign.
Also have Ai quit out on me in the CC_2014.
This is very frustration since I use these the mostFor MAC try to give permissions to Adobe Indesign Folder:
Users/[user]/Library/Caches/Adobe InDesign
Users/[user]/Library/Preferences/Adobe InDesign
Access hidden user library files | Mac OS 10.7 and later
For Windows try to give permissions to Adobe Indesign Folder:
C:\Users\[username]\AppData\Roaming\Adobe\InDesign
C:\Users\[username]\AppData\Roaming\Adobe\InDesign
Also you can try logging in under a local administrator account as suggested by jeff. -
Keep getting error message "The registry settings used by the iTunes drivers for importing and burning CDs ....please reinstall iTunes." I have done this several times but it doesn't help.
Refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299 -
I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie. -
I get this error upon launching PS5: "could not open a scratch file because the file is locked .."
I get this error upon launching PS5: "could not open a scratch file because the file is locked or ou do not have the necessary access privileges. Use the 'properties' command in the Windows Explorer to unlock the file". The applicaiton will not launch.
Supporting information - I recently changed the scratch disk from C drive to D drive (the back up/restore drive). The application wont launch so I cant change it back to the C drive.
Questions:
- How to I fix this .. from windows explorer how do I find "the file" that the error message refers to?
- Other ways to fix this?
Thanks SteveHi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
To help others help you, please read through this article and provide any additional relevant details.
Maybe you are looking for
-
HP Color LaserJet Pro MFP M177fw Scanning
I bought and jsut setup an HP Color LaserJet Pro MFP M177fw. We are a Mac household, and we connect via wireless to the printer, which works great. My issue is scanning. On the little screen on the printer, I can copy, print and even fax. No opt
-
Hello, 1- Can I use i-Prefix in an app name like in iGame or iSaw? 2- Is it allowed to put an unknown coach's name in the app "Mr. John's Tips"?
-
Mac for office 2011 will not load
Mac fo ruff ice 2011 will not load?
-
Hi, my iphone screen went 'large and I was distracted for a minute or two. When I came back to it it had locked me out, however, it was impossible to return to a normal size print to log in. I finally reduced the print by reconnecting the battery. No
-
Hello! I have had a setup in iPhoto where I can add new photos to existing albums. I see after importing the iPhoto library into Aperture, I cannot import photos right into an album under the iPhoto Library tree unless I create a new project. That sa