HT203254 My 15" MacBook Pro of about that vintage indicates that all is well by the hardware tests bu will not boot beyond Apple screen, stops with arrow and short horizontal lines.

What serial and model numbers were known to be  Products Affected,  MacBook Pro, models with NVIDIA GeForce 8600M GT graphics processors?

Welcome to the Apple Support Communities
Take the computer to an Apple Store because your graphic card is damaged. The computers affected were sold between May 2007 and September 2008, so if your Mac is one of these Macs, Apple will repair the computer for free

Similar Messages

  • Macbook Pro will not boot beyond grey screen.  System freezes.

    My Macbook Pro will not boot-up or get beyond the grey screen (with spinning gear wheel.)  I've tried all the recommended actions: resetting PRAM, disk repair, permissions repair, re-boot in safe mode etc but still the problem persists.  When viewing the safe-boot in verbose mode, the system seems to hang at the stage when it's checking the Airport & Ethernet - the last line on the page reads: "AppleBCOM5701Ethernet:   0    0    setFixedSpeed - logic error, speed any?"
    Any ideas how to fix this without doing an Archive & Install?
    I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.)  Will this actually be the case?  Will I lose them.
    Any help gratefully received.  Many thanks.

    jfromplymouth wrote: ...I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.)  Will this actually be the case?  Will I lose them...
    Archive and Install just affects the System files, so any apps you have  should still be available afterwards.  The Installer on the disk that  came  with your Mac, when you bought it, will tell you this before you  proceed.  Of course, you can always back out of the Installer if you feel chicken.
    Notwithstanding it is still necessary to backup everything.  You need to check that Time Machine is set to also backup your Applications folder.  It might be set not to do this. 
    It may not be necessary to worry about this if you have the original installer disc(s).  I think any stuff downloaded from iTunes etc can be re-downloaded.  However, it's probably quicker to get Time Machine to backup your apps if you can afford the HDD space.  It's bound to be quicker than re-downloading the stuff plus any updates.  And of course there's those Apps that you have but forgotten about.  What about them?

  • Macbook pro will not advance beyond grey screen at beginning of boot

    macbook pro will not advance beyond grey screen at beginning of boot

    Try performing an SMC reset. I am having this problem also.
    To perform an smc reset:
    1. Shut down your Mac, leave the MagSafe charging in.
    2. Push three buttons: shift + control + option and the power button. Push and release together.
    3. Wait a few seconds then turn on your Mac as normal.
    Hope that works out for you!

  • I have a new macbook pro 2,6 Ghz i7, 8GB 1600Mhz internal ram. He will not boot from an external disk with operating system Snow Leopard

    I have a new macbook pro 2,6Ghz i7, 8GB 1600 Mhz internal ram, but he will not boot from an external disk with operating system Snow Leopard.

    These Macs shipped with 10.7, and will run nothing older than that:
    MacBook Pro
    Date introduced
    Original Mac OS X included
    (see Tips 1 and 3)
    Later Mac OS X included
    (see Tip 1)
    Mac OS X Build(s)
    (see Tip 2)
    MacBook Pro (Retina, Mid 2012)
    Jun 2012
    10.7.4
    11E2068
    MacBook Pro (15-inch, Mid 2012)
    Jun 2012
    10.7.4
    11E2617
    MacBook Pro (13-inch, Mid 2012)
    Jun 2012
    10.7.4
    11E2617
    MacBook Pro (13-inch, Late 2011)
    Oct 2011
    10.7.2
    10.7.3
    11C74, 11C2002, 11D2001
    MacBook Pro (15-inch, Late 2011)
    Oct 2011
    10.7.2
    10.7.3
    11C74, 11C2002, 11D2001
    MacBook Pro (17-inch, Late 2011)
    Oct 2011
    10.7.2
    10.7.3
    11C74, 11C2002, 11D2001

  • TS1587 iMac will not boot. Monitor lights up with squiggly little lines, but that's all. Help??

    My iMac 24" inte will not boot. Monitor lights up with squiggly little lines, but that's all. Help??

    Can you run Apple Hardware Test.  In you case it is not so much to see what it finds but to see whether you can boot it at all.
    Or try a safe boot.
    It may be time to take to apple for repair.

  • MacBook Pro Will Not Boot Past Apple Loading Screen At All.

    I am having a major problem with my MacBook Pro and it just wont boot past the apple loading screen at all
    I have tryed al lot of ways to fix this and it just wont work
    It does not go into safe mode, it does not boot from cd, the PRAM thing wont work, verbose mode or the comand + s mode wont work
    I tryed clean install but it wont boot from dvd, also it will not boot in any other way
    It was working perfectly last night and i just shut it down and it does not work know.
    My friend was also trying to install Lion from his account but the .dmg for it did not open so we quit and that night i used it for my essay and finished and then i turned it off and next day in the morining it don't work
    HELP ME PLEASE

    You can take the drive out of the computer, use a $20 IDE/SATA to USB adpater to another Mac
    You can see if you can read the drive directly to gain access grab files, run Disk Utility and perhaps it can repair it.
    If you can't read the drive then there is DataRescue for a whopping $99 but it will read any deleted (but not scrubbed, encrypted or overwritten) data for recovery. Least that way you can get your files back.
    Once your data is off, Zero Erase the whole thing, install 10.6 on it with the other Mac.
    When installed in the sick mac, the hardware firmware will read the new EFI firmware, load it and you'll have the boot keys back again ON THE SECOND BOOT, it doesn't load on the first.
    https://discussions.apple.com/docs/DOC-3172
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • Macbook pro serial no C1******H2G. But I don't know the admin password & I'm not given with the OSX CD. Now how I can unlock my macbook pro.

    Hello, I recently bought a refurbished macbook pro which serial no is C1******H2G. I can't open this coz I was not provided with any admin password. Point to note here I have not any operating system CD also. Now how can I unlock my macbook pro ??
    < Personal Information Edited By Host >

    Who did you purchase the MBP from.  They should have the password.
    An early 2011 MBP probably came with Snow Leopard. Use the original OSX disks and reinstall 10.6.
    There is a possibility that it came with Lion (10.7).  In that case boot the MBP holding the OPTION+COMMAND+R keys.  That should connect you to the Apple servers and install the original OSX.
    Ciao.

  • As I click Face Time application for my recently purchased MacBook Pro, it tells that you have already a newer version...But I don't know how where is it and how to make it operational.. Anybody can help?

    As I click Face Time application in my recently purchased MacBook Pro, it tells me that you have already a newer version of Face Time...But I don't know how and where I can access this newer version in my machine and make it operational.. Please help

    It sounds like you might accidentally have changed the hidden flow setting:
    http://www.youtube.com/watch?v=JkAeKmJVPPU
    (and thanks again for this video, MTSTUNER)

  • MacBook Pro will not boot from Apple Logo Screen - No HD recognised

    Hi all,
    I encountered a problem booting my mid 2010 MacBook Pro yesterday. I currently run OSX Mavericks.
    The computer has been great for the last 4 years and has never encountered any major issues. Yesterday I dropped it on carpet while sitting on the couch (it was a VERY small impact) and I continued to use it for a few hours. I did a safari update that night also. I then closed the lid which would have put it to sleep. My flatmate asked for a file later that night, I took his USB and stuck it in my computer, THEN opened the lid. The computer never booted up (It was stuck on the apple logo with the spinning thing underneath it). After doing this for a minute or so the computer would turn off. After multiple attempts the same thing happened.
    I read many posts on this - I am assuming that the problem occured because I brought it out from sleep with a USB in the side. I have taken the following steps to attempt fixing the problem -
    *safe boot - no luck
    *reset PRAM - no luck
    *recovery mode boot - getting disk errors.
    In recovery mode boot I cannot reinstall a new OSX version because there is no internal HD disk mounted. It only gives me the option to install OSX to the Recovery HD, which is locked.
    Using Time Machine backup wont work as there is also no Internal HD detected to load to.
    In Disk Utility it no longer has 'Macintosh HD' - It is further labelled 'disk0s2'. I cannot verify, repair OR erase this disk.
    Can someone PLEASE assist with what I might be able to do. I need to somehow mount/unmount/detect my internal HD. I am happy to detect it and format it as I have Time Machine backups on an external HD.
    I am no mac genius although I do learn quickly. If I can get assistance It would be very appreciated. I have a feeling I can sort some issues out using Terminal although I need command assitance?!?
    Apologies for the long post although I want to outline everything I have done to attempt to isolate the problem.
    Thank you all in advance.

    Does your flatmate have a Mac as well?
    If so, you could always get a 8GB+ USB stick, download Mavericks using your Apple ID and use DiskMaker X to create a bootable installation disk on the USB stick. Then boot using the USB stick (hold down the option ey whilst booting to select it) and try to reformat your drive using Disk Utility and, if you're able, reinstall OS X on your machine and then restore from backup.
    The only hitch may be that your hard drive is dead and that you need to install a new drive. You'll know once you boot from the USB stick, though, if you can format the drive or not.
    Good luck,
    Clinton

  • MacBook Pro does not boot past apple screen after replacing hard drive

    After replacing hard drive on MacBook Pro 13 inch early 2011 model, the screen only boots to the apple logo.  Do I need to re-install the OS?

    The problem is that the OS is not in any where else of the MacBook Pro than in the HD / SSD. If you replace the Hard Drive, then you will need to Re-install OSX into that hard drive, it's pretty easy.
    1) Power up your Macbook Pro, as fast as you can press and hold the Option key (ALT). You'll see that it opens the bootable-devices you have, you'll see a Recovery partition, click it.
    (If the Hard Drive contains data do the following)
    2) In the menu select Disk Utility.
    3) In Disk Utility go ahead and select the Hard Drive that is inside the MBP.
    4) Erase the content.
    (If the Hard Drive contains no data continue with the following jumping the last 3 steps).
    5) Select Re-install OSX.
    6) Select the Hard Drive in which you want to install it.
    Follow the steps of everything else (it should take approximately 1 hour to do the whole thing).
    Hope this helps!
    Later.

  • Macbook Pro - Not booting beyond password screen

    Evening!
    Last night I turned my MBP off, all had been fine and was working normally and the only thing attached was a Lacie HD via the firewire port.
    Tonight I've turned it on and couldn't get beyond the password screen. I've reset the Pram, disconnected the Lacie, booted in safe mode, had the install disk in, checked and repaired permissions, checked and repaired the disk which needed minor repair (first time thats ever happened and this is 3+ years old), it then passed so I rebooted but same result. I've also used Applejack on it and after that occaison it went past the password screen but finder wouldn't start so I clicked on it in the dock which then froze and I couldn't do anything so had to force shutdown.
    My password was correct each time - no shaking of the box and the eventual prompt coming up - but each time it just took 20 or 30 secs and then brought the box back up. I've used the startup disk and changed my password and tried it again and now I'm sat with with a solid blue screen and have been for about five mins.
    Has anybody got any ideas??
    Cheers,
    Andy
    Message was edited by: Fordonian

    Can I ask why you say that? Is there something in the description which sets a particular alarm going and you think something terrible is going to happen?
    I've booted it via Applejack again and found that pretty much all apps run normally but Finder isn't there and won't start. System Prefs will launch but most options send it into a beachballing world of non-response. The only App that really kicks off is iTunes - saying my library is damaged and I've lost alot of song once it does fire up.
    On the basis of those and not really having much else of a clue on what to do I've gone for an Archive and Install. Besides, last time I took to a Genius Bar the attitude I got from the guy on it was hardly pro or tollerable.

  • Mac book pro will not boot up, black screen

    I got a macbook pro from a friend and am trying to see if it works.  The battery on the back seems to charge with the green lights on the back, and the small white light on the lid button lights up, but I have no display.  I tried plugging in a secondary display off of the DVI port, but that did not work either.
    2.4 GHz core 2 duo/2GB/256MB/ VRAM/200 GB 5400rpm

    I got a macbook pro from a friend and am trying to see if it works.
    It doesn't.

  • MacBook will not boot after iTunes 10.5.2, iPhoto, and Safari update

    My MacBook (mid 2007) will no longer boot after the iTunes 10.5.2, iPhoto and Safari update. It will load Lion but will no open any applications. After running Repair Disk Permissions and Repair Disk in the Recovery HD, Lion will ask for my password, log in, then display the menu bar and a grey background and remain unresponsive. I tried downloading a new copy of Lion in Recovery HD but it will not get past about 1/8 of the download bar before freezing and becoming unresponsive. Any ideas?

    Any ideas?? I really need to see if this is fixable! Thanks!

  • My macbook will not boot past apple loading screen

    Yesterday i turned my computer off before going to class, when i got back i was not able to get past the loading screen. I havent had any problems at all, many people have been saying that their macs start freezing then they have to manually shut down the computer. This usually means the hard drive is bad. but i have not had any of these problems. I am also not able to boot into safe mode. When i go into disk utility my hard drive shows up but is in grey, when i try to repair it it shows that its working but stays in the same spot for hours, i finally shut the computer down after 5 hours of it loading in the same spot. I have tried all of the commands suggested on the forums but have had no luck. I am also running lion but since their is no cd for lion would i use my snow leopard cd or the cd that came with my macbook in 2009. Sorry for the long post, thanks in advance!

    You can take the drive out of the computer, use a $20 IDE/SATA to USB adpater to another Mac
    You can see if you can read the drive directly to gain access grab files, run Disk Utility and perhaps it can repair it.
    If you can't read the drive then there is DataRescue for a whopping $99 but it will read any deleted (but not scrubbed, encrypted or overwritten) data for recovery. Least that way you can get your files back.
    Once your data is off, Zero Erase the whole thing, install 10.6 on it with the other Mac.
    When installed in the sick mac, the hardware firmware will read the new EFI firmware, load it and you'll have the boot keys back again ON THE SECOND BOOT, it doesn't load on the first.
    https://discussions.apple.com/docs/DOC-3172
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • Macbook Pro will not boot past apple logo/spinning gear

    Earlier this evening I was installing the aperture 3.0.2 and iMovie 8.0.6 updates onto my MBP and the system refused to install the Aperture update so I decided to shut down and restart the mac and when I saw the familiar Apple logo spinning I was distraught to see it would go no further. I then did what ay learned apple user would do and reset the PRAM and let it chime 4 times, just to be safe, and I restarted holding shift - the grey bar finished but it still would not load. I luckily have a Carbon Copy Clone of an old hard drive for this machine before I upgraded (much too outdated to copy back over - I would lose Final Cut Studio 3 and Aperture 3 etc...) which I was successful in booting into (and am using now) to do a disk utility > repair permission and repair disk. Both had no errors and I was sincerely confused. I attempted to boot it once more before I started to freak out. Needless to say I freaked out. I booted in single user mode and ran the checkdisk within that TWICE before typing exit and it did the rest of the verbose boot which then hung on "AirPort: RSN handshake complete on en1" This is the end of what I know to do - so with that I hand it off to you... any help is appreciated a and will definitely be attempted.
    -Lucas

    The drive had over 350GB available. Yes I suppose I would be able to but I am unable to locate one. If someone is certain a OS replacement install would fix things I am willing to go buy one...

Maybe you are looking for