HT204291 Air Play was working now it is not gives me the An error occurred (-6722) while connecting to the AirPlay device "Family Room Apple TV"
Apple TV is working and set up. All I have done is take a vacation and one time I did hook up Macbook to a HDTV. Now I get home and this is the error I get.
An error occurred (-6722) while connecting to the AirPlay device “Family Room Apple TV”
Router is OK, I did check my security settings and I did turn on the firewall, while overseas, I turned it off and it works.
Similar Messages
-
HT204291 An error occurred (-6727) while connecting to the AirPlay device "Apple TV"
this is the message i get when trying to mirror with the new mountain lion.
everything is switched on airplay works with my ipad nut will not connect through the mac does anyone have an answere pleaseScorpy, Ever get a reply... Just started happening to me!
Thanks. -
Facetime on iPad was working, now it's not. What's up?
Hi all,
I'm so frustrated, I'm going bananas. I've read every forum post I can find and can't seem to figure out the problem. My husband and I are on separate continents and we've been keeping in touch through Facetime. Then, on Tuesday (which happened to be my birthday - cue small violin), we could no longer connect. I can Facetime other contacts though. Just not him. And he says he can Facetime other contacts. Madness!
When I call him, it rings and rings and rings on my end. He says on his end, it shows as "connecting" but then never connects. When he calls me, there's no notification, no ringing. Nothin'.
I have an iPad 2. He uses his Mac to FT with me. He also has it on his iTouch, I think. (I also have an iPhone but it doesn't have Facetime.) Nothing has changed on my end. (I upgraded to io5 but that was only yesterday, so wouldn't have had anything to do with loss of connection that started Tuesday.)
Anybody experience anything similar? Any guesses?
Thanks so much!For anyone with similar challenges, here's what we did that worked (we're not sure whether both solutions were required or only one):
1. I changed my DNS to 8.8.8.8. (you can read about why in other posts)
2. My husband turned off all other Mac equipment so only his computer was on when he tried to Facetime me.
We're digitally reunited! -
===
Hi
I bought an iMac a week ago and installed Firefox via Safari. It worked fine for a while but, after a recently switching on, it won't connect to the web whereas Safari has no problems.
I've tried following the Firefox Help, looking into the iMac firewall, but still no luck.
I've no idea whether related or not but yesterday I had a system glitch where the iMac stated no wi-fi was installed and only connected via a physical lead to my house router. Also, there was no sound output via Safari. However, after booting up today all seems well – apart from Firefox still not working. It loads the start page but can't access the web.
I have Little Snitch running, and wonder if that's the culprit... but it's working fine with Safari, seemingly.
(Finally, how do I stop a dialogue box appearing on start-up saying that "To open “X” you need a Java runtime. Would you like to install one now?)
Any ideas anyone?
Cheers
Rob / Sheffield / UK
===On the wireless networks that your Mac has had trouble connecting to, do you know which Wireless Security type (WEP, WPA, or WPA2) is being used?
If it is WEP, one of the problems is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP. In order to make things easier, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling the use of simple easy to remember WEP password rather than lengthy HEX keys. The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a non-Apple client and vice versa. You may find the following Apple Support article helpful. -
I am using Lion on a MBP with 2 x AE.
One quick update. A workaround that was mentioned in one post did seem to work - if music is started via the Remote app it seems to connect fine.
And I'm not sure if I dare upgrade to iTunes 11 given the firestorm of bad impressions I see, including some that relate to Airplay functions... -
Had to redownload i tunes following hard drive reboot but now cannot connect the i tunes store as I get the following error message " itunes could not connect to the itunes store the connection timed out " I get this message as soon as I click on the store.
Any ideas how to solve this ?????
BillHad to redownload i tunes following hard drive reboot but now cannot connect the i tunes store as I get the following error message " itunes could not connect to the itunes store the connection timed out " I get this message as soon as I click on the store.
Any ideas how to solve this ?????
Bill -
I purchased an album on ITunes store, while the items downloaded to my phone, it didn't download to my mac. Some of the songs downloaded but not the majority, when I try to download the songs, it gives me an error 8003 Unknown error occured. What am I doing wrong? If I can't download this album, how do I get a credit??
Hello mercdw,
Once the music has been downloaded to your iPhone, you can transfer purchases from your device to iTunes.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
Alternatively, the following article provides further information regarding this error and steps that can help resolve the issue.
"Error -50," "-5000," "8003," "8008," or "-42023"
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while accessing iTunes Store:
See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X: ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
Windows Vista: \Users\username\Music\iTunes\iTunes Media\Downloads\
Windows 7: \Users\username\My Music\iTunes\iTunes Media\Downloads\
Windows XP: \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
If you encounter this issue while while downloading Digital Copies using Windows:
Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Cheers,
Allen -
Installed Windows 8 on a late 2011 MacBook Air and was working fine now keyboard not working so cannot enter password? Caplocks key works but I am locked out on my own PC and cannot seem to get it to recognize built in keyboard,bluetooth,generic USB one.
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
How do i get air play to work from my macbook to apple tv
How do i get air play to work from my macbook to apple tv? It does work with some programs like itunes but I can't get it to work with safari.
apple tv does not work in safari. there is no web browsing capabilities on the apple tv..
however what you are probably referring to is mirroring? iPad 2 and iPhone 4s have mirroring capabilities, so what you have on the screen is exactly what would appear in the apple tv..
on ipad for example...ignore the settings page. Instead, go to the iPod controls. Double-press your home button to see the multitasking bar, showing all your recent apps. Swipe your finger from right to left for the mirroring icon; you'll see the AirPlay icon. Tap on that, select your Apple TV and toggle the mirror button to 'on'. -
HT3349 nothing shows in print view in numbers document, it was working now nothing
When I go to print numbers document nothing is showing in print preview, it was working now nothing shows
Grammy,
What does your document look like? Does it have a large blank space near the top? Does the Print Preview graphic show move than one page to be printed. If so, what's showing for the higher page numbers?
Jerry -
When trying to play itunes from my PC to my stereo connected to an Airport Express, I gen an error that says "An error occured while connecting to the Airplay device "Stereo" an unknown error occured (-15000)". This has happened before and for reasons unknown to me, the problem corrects itself, then it starts again/ Makes me wish I did not have my music on itunes.
moehadi, Welcome to the discussion area!
This is typically caused by a firewall or Internet security software running on your PC. Please read the comments in "Error -3256 or -15000 when streaming to AirPort Express base stations using iTunes".
Also there is "iTunes 8: Unknown error -15000 when attempting to stream music to devices connected to AirPort Express with AirTunes". -
My iMac wouldn't turn on. This has happened out of nowhere, it was working really well before. checked my power cord and outlets everything's fine. The iMac has no power at all. no sound or anything, completely dead. It is only 1 year and 2 mos old. Any idea what it could be?
I have purposely been ignoring your responses to my posts about the heat issues in the newer design iMacs, but if you want really want to ague the point...
First, the iMac is marketed as a desktop model Mac. Not a laptop or MacBook.
I have never owned a MacBook, so I can't attest to how much heat the MacBooks generate.
I Have two iMac models. A 2009, 27 inch screen iMac for myself. And a 2010, 21.5 inch screen iMac for my Fiancée.
As a desktop Mac these are hottest running desktop Macs I have ever owned. Period. I owned two beige Macs, a pre-G3 tower, aG3 desktop, a G4 MDD Tower, the original iMac, eMac, iMac G4 and now my current iMacs.
None of my previous Macs have ever, EVER ran this hot. I have never, also, had any component failures in any of the previous Macs I have owned, either. All of my Macs have been upgraded or modded to some degree over the years. About 2 years ago I had to press my old G3 back into service. Both my G3 and G4 models have been heavily modded. The G3 ran without issue for a close friend for over a year until that friend went out a got a Mac Mini.
That's a 1996-97 Mac my friend. And it still is in working order and hasn't had any failures.
The fact I am pointing out here is that heat is an enemy to electronic components.
Whether desktop iMac or MacBooks, tightly packed enclosures of heat generating computer components with fans that do not run fast enough at most times to cool off the interior or exterior, will and does slow roast computer components to premature failure.
I do not know how frequent component failure is in the MacBook line up. So I can't attest to those.
I do not participate in those forums.
This is why at some point in computer history, Super Conputers were liquid cooled. PowerMac G5 systems were liquid cooled because they ran too hot!
I have taken my own precautions to keep my iMacs' heat down as much as possible.
I don't have the money to keep buying a new Mac every 3-5 years when some catastrophic failure happens.
I had to purchase my iMacs used as I couldn't afford the cost of a new iMac with the specs I needed.
My idea, your idea and Apple's idea of acceptable operating temps we can argue all day long.
I feel, personally, that the operating temps are too high and exacerbate operational issues.
I Have been participating in these particular iMac forums for just over a year and have seen plenty of posts of iMac component failures due to both heat and dust, dirt issues from within the iMac.
There can be no other reason for all of these failures. The SuperDrive is, usually, the first to go bad.
It's probably due more to its vertical mounting, but the excessive interior heat isn't helping it.
Next to fail is the GPU. The last to fail, but the most expensive to fix, the Logic Board.
I Have seen plenty of posts in my last year here of all of these failures in iMac less than 5 years old and ,perhaps, a little older. 2008 model iMacs seem to have their issues, too!
Apple is focusing too much on design and aesthetics, rather than longevity of their products, I feel now.
A Mac isn't going to last 7- 10 years anymore.
I don't have stats and numbers. Just common sense.
This is my story and I am sticking to it. For what it's worth. -
I have been working on a file in pages which I cannot open now. Every time I select it "an error occurred and pages must close" appears and pages shuts down. I have tried to duplicate the document but cannot open the copy either. I am unable to email, share via iwork, itunes, idisk or WebDAV all of these options just close pages down. Does anyone have any ideas......Thank you
And you are quite persistent, Menu Boy, in offering pernickety and pointless prattle, in response to a "support page" on iPad's buggy Pages App.
Let's summarise, for those reviewing this threadless thread for app support..
Mobile pages works reliably for simple docs, especially creating letters and Menus for Microsoft's Kindy canteen (even on special days with nice big pictures).
When importing more complex docs and/or working with larger creations, it is prone to randomly corrupting files upon re-opening, along similar lines as Word (running on a PC).
So, Menu Boy, do they let you sneak into classes every now and then? What is the secret to their training? "Say after me, if any I.T. product works just some of the time, that's a job well done, and if something randomly stops working, we call that the user's fault... And if they complain, we call them names." -
Installed latest version of iTunes, now I cannot play music through my Airport Express. I'm seeing the message "An error occurred while connecting to the AirPlay device "living room". The network connection failed..."Living room" is what I named the is what I named The AirPlay function of the Aport Express. Thanks!
I have the same problem - did you solve it?
-
I am trying to add a wireless printer to my MacBook Pro. It was working properly until we had to get a new modem. I have gone through the steps with the printer customer service rep, and it was working properly for one day. When I booted up the next morning, the printer was no longer "connected". It will work if I have the printer and computer connected, but I much prefer the wireless capability. Suggestions? The printer is a Brother MFC7860DW. The other laptop in the house (Dell) can print wirelessly so I don't think it's an issue with the modem or the printer.
Hello,
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
1. To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
2. Choose System Preferences from the Apple menu.
3. Choose Print & Fax from the View menu.
4. Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.
Maybe you are looking for
-
Itunes CD won't install Quicktime
Hi! I just bought a Ipod Video 30gb. when I install Itunes, half way through, there comes the screen that says that Itunes has encountered a problem and needs to be closed, then you can choose send or don't send error report. when I look at the techn
-
Help.i cant get itunes to install
i have been trying to install itunes and i keep getting error code 2738 come up when it is installing.i have tried doing what others have said but it still will not install.what can i do please.i have a new iphone and cant get it to work without itun
-
Greetings to all. There is currently a bug in the Mini's firmware that poses as a slight problem for me. I'm sure some people are aware of this, but Apple has yet to present a solution. Problem: While booting a Legacy OS, such as Linux (Grub/LILO), o
-
My ipad screens apple picture keeps blinking and will not open
my ipad screens apple picture keeps blinking and will not open. I have tried pressing both top and bottom button together, pressing just the top, etc. and nothing...it just keeps blinking the apple?
-
Hello forum. Here is my issue. I have a photo blog based on WordPress. I'm used to post photos on it very often. I'd like to use those pictures for my screensaver. It looks obvious to use the RSS screensaver, but with the feed provided by WordPress,