I set up my AE (2 in different rooms) and then tried to acquire and tried to select and play but got error message  -15506 "while connecting to the Airplay device".?

I am using Lion on a MBP with 2 x AE.

One quick update.  A workaround that was mentioned in one post did seem to work - if music is started via the Remote app it seems to connect fine. 
And I'm not sure if I dare upgrade to iTunes 11 given the firestorm of bad impressions I see, including some that relate to Airplay functions...

Similar Messages

  • I have itunes set up to sync with my Ipod Touch and my Ipad.  As of today, it keeps looking for an iPhone to sync with and give me an error message.  I don't have an iPhone and don't know how to stop it from popping open with this error message.

    I have Itunes set up to sync with my Ipod touch and Ipad.  As of today, iTunes has started searching to sync with an iPhone, which I don't have and pops open with an error message stating it cannot locate the iPhone to sync.  I have looked in devices and only the iPad and iPod Touch are listed.  Any ideas on how to stop iTunes from searching for any iPhone it is never going to find? It is annoying to have it popping up all the time with the error message.  Thanks in advance for any suggestions.

    You should really read the manual.
    "How do you restore from backup? "
    Restore.  When given the choice, choose to use backup.
    "And how can I check to see if the pics and videos are on my computer somewhere first??"
    They would only be where you put them.  What program did you use to import them?  Pics/vids taken with ipod are not part of the sync process at all.  You should be importing them just as you would with any digital camera.
    If you did not import them, then they are not on your computer.

  • I got a new ipad mini and chose to set up as a copy of my iPad.  Didn't sync the music on however as it is a smaller model, not enough room.  Now trying to get some pictures and music on.  Chose some pictures that were not in iPhoto, got a message that I

    I got a new ipad mini and chose to set up as a copy of my iPad.  Didn't sync the music on however as it is a smaller model, not enough room.  Now trying to get some pictures and music on.  Chose some pictures that were not in iPhoto, got a message that I could only sync with one library, chose cancel, and apply and it downloaded my pictures anyway.  Now trying to sync some music but just get "The iPad “Linda’s iPad” is synced with another iTunes library. Do you want to erase this iPad and sync with this iTunes library?"  So I hit cancel.  Have tried several times, same thing. What can I try?

    You should be able to accept this message, it will cause existing music, photos (not camera roll) and videos (also excluding those in camera roll) to be removed and replaced with those from this computer. All other user data on the iPad will be unaffected.

  • I have set up a 'group' in my contacts.  When I go to send an email to this 'group', I get an error message saying 'Invalid Address'. What am I doing wrong?

    I have set up a 'group' in my contacts.  When I go to send an email to this 'group', I get an error message saying 'Invalid Address'. What am I doing wrong?

    I have this problem too. I've always sent messages successfully via bcc to a group using a group email list in contacts. Now ... all of a sudden when I select the same group for bcc nothing happens! Cannot email my group now. Why not?

  • How can I set up my Mac Pro so that my wife and I can use our separate iTunes accounts? I keep getting an error message that the computer is already associated with an Apple ID even though the two accounts are associated with separate log ins!

    I'm getting very confused with setting up multiple user accounts on my Mac Pro for my wife and I. We each have a separate iTunes account, and we want to keep our music libraries seaprate. I've set up two user accounts on the Mac Pro and I have my iTunes authorised and logged into my user account on my user account. Under my wifes user account (i.e. a separate log in on the computer) I'm trying to set up her iTunes account, but I can't download or play anything from the cloud - it just says "This computer is already associated with another iTunes Account" and tells me that if I 'transfer' then I won't be able to use the other one for 90 days! This is really annoying as my wife can't access music she has purchased on her iTunes account on the home machine. We're not trying to do anything dodgy, just access our music on our own accounts on separate log ins on the same machine. Does anyone have any suggestions? Thanks!

    Hi Allan, thanks for that. I've already set up a log in for my wife and that is all working fine. The problem is that when she logs in and opens iTunes and trys to associate her library with her iTunes account she gets the error message "This computer is already associated with another iTunes account". Whilst this is true, the computer is associated with my iTunes account under my separate log in, which should have nothing to do with hers. If she transfers the association to her account it will lock me out of my content on my log in for 90 days - I'm trying to work out how to associate each of the log in accounts with a separate iTunes account so we can access our music independently of one another without locking each other out. Hope that makes sense!

  • I set up ITunes etc. but keep getting the same error message: itunes cant connect ....error

    I'm getting very annoyed. Last night I bought an Ipod Touch for my son's birthday today. Tried to set it up last night...no go. I figured I was just tired and thought to try again this morning. I hooked the Touch up to my PC (running WIn7 Ultimate), downloaded the latest ITunes and set up "my" Apple ID. The fact I had to use my Visa was another annoyance. I set up HomeShare on his and my PCs and figured I'd activate the IPod from his PC, because it said on the acct. page that you could activate the acct. on only one computer. I plugged it in and got the " usb to itunes" image on the ipod screen, opened Itunes, checked for updates and it was the latest version. It said I have activated it on 2/5 PCs and before I could do anything else, I got the error message: " iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065)" which pops up everytime. Still haven't seen the "app screen" on the ipod. I must say I'm rather disappointed with Apple after hearing how good it is. Doubt if I'll ever buy a Mac PC. They seem to be worse than MS for proprietary bs. If I can't get this working soon it's goin back.If anyone has had the same problem, I'd appreciate any feedback Thanks.

    Have a look at the articles mentioned  here:http://support.apple.com/kb/TS3694
    Unknown Error containing "0xE" when restoring: To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.

  • HT1695 i bought a used ipod touch and reset it to the factory settings via itunes and now i'm trying to set it up like new and it won't let me sign in with an apple id it says it can't connect to the server.  Other wireless devices are working HELP?!

    I am trying to set up  my daughters ipod touch after resetting it to factory settings.  So I am trying to sign in using an apple id.  It says won't connect to the servier, but I have other wireless devices connected, so I know my wi fi is working. What now? Thanks

    Return it and get a refund. Without the prior owner's Apple ID and password that device is useless. Find My iPhone Activation Lock- Removing a device from a previous owner’s account. You were screwed by the ignorance of the pawn shop owner.
    <Edited by Host>

  • Getting error message when attempting to download the beatles box set itunes lp

    I am getting an error message when downloading the beatles box set/iTunes lp.  States the file isn't there.  please advise.    

    Hi,
       First of all, you have to identify the scheduler server in case you have a multiserver installation.(Server Managr->Options->Server options). Then you have to follow the steps:
    1. Go on Scheduler server, open Control Panel->Scheduled Tasks and delete all the jobs starting with DM_<appset>*
    2. Run the query into the appset sql db:
        delete from tblSchedule
    You can run the steps by application as well(if you have problem only for a specific application):
    1. delete all jobs starting with DM_<appset>_<application>*
    2. delete from tblSchedule where App='<application>'
    Best regards,
    Mihaela

  • I just downloaded and instaled firefox 4. Now, everytime I institute a command I get a po[p-up from Java script that tells me to uninstal set. I cannot go on untin I press ok and then I am good for one more command and it starts with the pop-up again.

    I'm not even sure if this is an extension or plug-in and all I can tell you is what I have already stated. I can only make one command at a time and after each one I get a pop-up from Java script that says uninstal set. I must depress ok to move on, but only for one more command and it starts over again. This also happened when I tried to instal firefox 4 a couple months ago and I deleted the program and went back to an earlier version.

    Mail troubleshooting - Yosemite
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages
    SMTP servers keep going offline

  • I can not connect to my work e-mail using both regular e-mail set-up and mail 2003 (work has Outlook 2003).  I get the error message "no internet connection- as soon as a connection is made it will switch back".  Does anyone have any suggestions?

    Why can't I connect to my work e-mail (Outlook 2003) using either the regular e-mail account set-up or Mail 2003? Does anyone have any suggestions?

    I have yet to find an email server that does not work with Mail.app. Your solution will be to configure its ports and send/receive protocol according to the email server's requirements.
    Try the Zimbra support forums. I found this excerpt from a relevant post:
    http://www.zimbra.com/forums/users/46221-mac-mail-app-dont-work-outside-company. html
    in which the following ports were suggested
    ports 25, 465, and/or 487 to send mail.
    port 143/993 to retrieve mail over IMAP

  • TS1060 I have the newest version of Keynote (6.1) and I am still getting the "You need a newer version of Keynote to open this presentation." error message. In "Get Info", the file is set to open by Keynote 6.1.

    Anyone experiencing a similar situation? Any recommendations?

    Try the repair routine for Keynote 6.1
    be sure to complete all the tasks and in the order shown:
    1  delete all the iWork applications if you have them, not just Keynote by using Appcleaner from Mac Update to      do this, its freeware
    2  restart the Mac;   Apple menu > restart
    3  immediately after the start chime,  press the shift key until you see the Apple symbol.
             let it fully boot up,  it will take longer as the OS is repairing the drive
    4  when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive  then First Aid tab and      click  repair disc permissions
    5  when complete, restart the Mac normally
    6  install Keynote from the Mac App Store
    Please report back to let us know if this helped.

  • My iPad is not letting me make new calendar entries, says calendar is not set - but I'm still able to make entries on my iPhone and then that entry appears on iPad.....but then I can't edit it, or add information. Really frustrating ....it worked before.

    Hoping someone can help me with this?
    My iPad calendar is not working, yet the iPhone calendar is fine. When I make an entry into iPhone the iPad gets it ...but then I'm unable to edit or alter the entry at all.
    Really frustrating, because all worked fine up until a few days ago ...panicking now because I'm not sure I can trust my calendar (which I rely on heavily).
    If anyone has any ideas as to how to fix this bug, please reply.

    It is locked to your sisters carrier.
    She would have to ask her carrier if they unlock iPhones and if she qualifies for this service.

  • When following your instructions on setting a blank new tab, I get and error message "invalid url", even though the sting entered in the config is as you state.

    I would like a blank new tab to open, but have followed the help guidance to modify the about:config.
    However, for all strings shown, I get a consistent error message "invalid url", even though the string has been copied correctly.

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Is there any way to change the language in the iTunes/MacApp Store but still having a credit card connected to the stores "in a different languauge?

    Hi
    I'm living in Germany and I've got a German credit card connected to the stores (iTunes and MacApp) but I'd like to change the language to either English or Swedish. This way I beleive that I would be able to rent movies in another language than German on my Apple TV 2.
    Is this possible somehow?
    (When I change the language I need to have a credit card registred in the contry of that language)

    I saw that I wasn't the first person with this problem.

  • Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

    Hello all,
    I can't open a PP project without this error message appearing:
    "The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
    What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
    I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
    Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
    Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
    1. How to fix this?
    2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can  afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
    Other older PP projects of mine open and work fine.
    Premiere Pro CC 8.2.0
    Media Encoder CC 8.2.0.54
    OSX 10.10.2
    Any help would be greatly appreciated.
    Duncan.

    Adobe web chat come up with a solution.
    Open the PP project.
    Export your sequence or project as a Final Cut Pro XML file.
    Set up a new PP project.
    Import the Final Cut Pro XML file.
    This will get you back up an running.
    Since getting back to editing this project I have found that some things will be lost or change in using XML:
    You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
    You will keep cut points, crop fx.
    Not perfect but only took a couple of hours to save 3 days work.

Maybe you are looking for