HT204368 My iPhone 4s will not recognise my TomTom car kit, so I cannot use any of my 3 TomTom apps. It will not pair, although I have held in the reset button until it beeps, then entered my PIN when instructed.

My new iPhone 4s will not recognise my TomTom car kit, so I cannot use any of my 3 TomTom apps, nor does it give me handsfree as before. It will not pair, although I have held in the reset button until it beeps, then entered my PIN when instructed. It also sometimes gives the message that this device is not supported by iPhone (although I have been using it for several years) with my UK and Ireland, Western Europe, and USA and Canada apps. Just replaced my 4 with a 4S rather than a 5, which won't fit the mounting kit.

From their web site Tom Tom actually offered a converter kit at one point however all it was a 3mm thick bit of plastic with a self adhesive tape backing!
Reference reading here
http://uk.support.tomtom.com/app/answers/detail/a_id/10561/kw/original%20iphone% 20kit

Similar Messages

HT4623 just updated my iPhone 4s to ios6, now my phone won't turn back on. The apple logo comes on and sits then shuts off. I have held down the home button and on/off switch several times to reset, but same problem persists.

just updated my iPhone 4s to ios6, now my phone won't turn back on. The apple logo comes on and sits then shuts off. Then comes back on and just sits.I have held down the home button and on/off switch several times to reset, but same problem persists.

Place iPhone on Wall Charger for at least 10 minutes. Then keep on charger and Reset, hold both home and power buttons until the iPhone begins to start, this can take about 20 seconds of holding both buttons while on charger. If still problem, open iTunes 10.7 on computer, connect iPhone to computer with USB Cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, then click Restore button of iTunes. If still problem, try DFU Mode Restore, here are the steps. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power buttons, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. DFU Mode can be difficult to enter sometimes, just keep trying. DFU Mode is a black, blank screen with iTunes saying Recovery Mode. If still problem and there is Warranty or AppleCare make Genius reservation and take to Apple for resolution.

2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light

2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light

The power supply is shot. But that it lasted even this long is the wonder.. not that it died.
The TC runs too hot..
Look on ebay for "Time Capsule power supply"
You can get a replacement and fix it although the economics are not so good.. it is probably time for a new TC.
If you can DIY it is really only a few dollars worth of capacitors that go bad.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
For a bunch of alternatives.

I keep getting an error message that my computer needs to be shut down. It is like a dark screen comes down and I have to hold the on button until it shuts down. Why is this happening?

I keep getting an error message that my cmputer needs to be shut down. A dark screen comes down and it says to restart. I have to hold the ON button until the computer shuts down. Then I can restart and it says it is sending a report to Apple. This seens to be happening a lot lately. Has anyone else had this problem?

Hi Carol...
error message that my computer needs to be shut down. It is like a dark screen comes down
That is referred to as a kernel panic.
Help here > Tutorial: Avoiding and eliminating Kernel panics | MacFixIt - CNETReviews

Yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

Are the lines like psychedelic herringbone? If yes, I had that happen once, it was something serious, like the
Logic board. The good news is that it was fixed without any loss of data on the hard drive. Take it in to have Apple look at it ASAP. I took it to TekServe at the time, they are very nice about preserving your data and user library when possible.
Good luck and don't panic.

Hi i have a iPod 5th gen it ran out of charge so as you would i put it on charge however after 25 mins i went over to see it and it wont turn on what so ever. I have held in the lock button and theres no sign of it turning on. Can anyone help? Thanks

Hi i have a iPod 5th gen it ran out of charge so as you would i put it on charge however after 25 mins i went over to see it and it wont turn on what so ever. I have held in the lock button and theres no sign of it turning on. Can anyone help? Thanks

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Only post when I press the reset button - MSI NF980-G65

Start-up issues, when i powered on I have to hit the reset button every time to get it to post properly. How do I fix this? This seems to be the ONLY problem.
I bought this recently from newegg.com
AMD Phenom II X4 955 Black Edition Deneb 3.2GHz 4 x 512KB L2 Cache 6MB L3 Cache Socket AM3 125W Quad-Core Processor - Retail -http://www.newegg.com/Product/Product.aspx?Item=N82E16819103674
MSI NF980-G65 AM3 NVIDIA nForce 980a SLI HDMI ATX AMD Motherboard - Retail
Patriot Gamer Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model PGS34G1600ELKA - Retail -http://www.newegg.com/Product/Product.aspx?Item=N82E16820220410
ThermalTake / PurePower W0100RU / 500-Watt / ATX 2.0 / 120mm Fan / 20/24-Pin / SATA-Ready / PCI-E Ready / Power Supply -http://www.tigerdirect.com/applications/SearchTools/item-details.asp?Sku=T925-1177
1 TB samsung Hard drive 7200rpm

Quote from: gamedave on 10-February-10, 06:26:24
NO I am using
http://www.patriotmemory.com/products/detailp.jsp?prodline=5&catid=41&prodgroupid=167&id=833&type=1
So again how do I fix this no post until I press reset?
Well its still Intel memory...:
* Tested on Intel?P45 and X48 chipsets
Quote
So again how do I fix this no post until I press reset?
you can try with 1 memory stick only in 1st dimm close to cpu socket.
apply memory voltage recommended by memory vendor.

When I import my photos from my iPhone 4S into iPhoto the location does not appear. I have to open the info button on the photo click "photo place" then "find on map" and then the location appears. How to I get the location to appear automatically?

When I import my photos from my iPhone 4S into iPhoto the location does not appear. I have to open the info button on the photo click "photo place" then "find on map" and then the location appears. How to I get the location to appear automatically when I import my photos from my iPhone?

in your iPhoto preferences is look up location set to "automaticaly"?
LN

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Kernel Panic: You need to restart you computer. Hold down the Power button until it turns off, then press the Power button again.

I apologize for writing a book, but I think explaining the full story may possibly get me a correct answer. I hope that someone can give me some insight as to what is the problem with my MacBook Pro. I have a MacBook Pro (15-inch Early 2008), model identifier: MacBookPro4,1 running OSX Lion 10.7.5 with 6 GB memory. My wife first noticed a problem with the display. Every so often it would get fuzzy with jumping lines going across the screen making it vitually unviewable. The final time that incident took place the computer froze which required holding down the power button to restart the computer. The computer started up to the point of the Apple logo and the spinning gear for quite some time until the screen darkened from top to bottom displaying the following message in five different languages: "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again." I have read other blogs and support communities where people get the message intermittently, but my computer would not go past that point no matter what. Through research and the Apple Store I was told that this is a Kernel Panic. The so called "Apple Genius" at the local Apple Store was unable to get the computer to boot past that point even with his gadget. It would not startup in recovery mode, safe mode or off of a disc. I forget exacty what he told me, but he said it was getting past the first two startup steps, but it would not get past the third step which is to mount the desktop. He guessed that it may be a problem with the hard drive; a loose wire or something or other. I disconnected the hard drive completely and took it out. Everything appered to be connected properly. Then I installed it back correctly, but it did not solve the issue. So I guess I disproved his theory of a loose wire... I purchased ProSoft Data Rescue 3 and connected my MacBook Pro to another Apple computer using a firewire 400 cable. I was able to get everything I needed off of the hard drive. I did some more research and I decided to restart the MacBook Pro in verbose mode (holding down the command button and V button). The computer magically started up!!! I was upset that I wasted my money on the ProSoft Data Rescue 3. I managed to take additional items off of the computer and back it up on to an external hard drive. After some time the computer froze. I repeated the power button process to restart and received the same kernel panic. I managed to get the computer to startup approximately six or seven more times via verbose mode; each time the computer staying on for a shorter amount of time before it would freeze. I managed to run Disk Utitlity. I performed first aid to fix the hard drive and it said that the hard drive appeared to be fine. After first aid I erased the hard drive and booted off of a Lion disc to perform a clean install or an erase and install. Lion installed until the progress bar got the the end where I received a message that there was an error installing Lion, please try again. Each time I attempted to install the software I would receive the same message. Eventually the computer would not boot from the Lion disc. I went back to the Apple Store and the Apple Genius was able to get the computer to boot off of his gadget where Lion istalled completely. I set up the computer as a new computer. He said that he partitioned the hard drive as DOS and then back to Mac OS Extended (Journaled) which would get rid of any errors the drive may have had. He guessed that the problem was the hard drive, but was not exactly sure. When I brought it home I installed all of the software applications I had on it previously. Approximately three days later, which may have been the fifth of sixth time starting up the computer, the display became fuzzy again and the computer froze. The computer did restart once and I was able to retreive a "log" which I have pasted below. After if froze for the second time it restarted once using verbose mode and froze almost immediately. After holding down the power key to shut it down and then restart; I received the same kernel panic after the Apple logo and spinning gear which put me right back to square one. Now the computer will not boot via any method. It freezes at the end of verbose mode which forces you to hold down the power button to shut down. I also read that poorly seated ram may cause this issue, but I removed and installed the ram multiple times. I even purchased new ram from Other World Computing (Mac Sales) 6 GB, but that did not make a difference. I think I may see six possible problems on the verbose screen mode, five errors and one warning; I will type them out here:
1. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key $Num (kSMCKeyNotFound)
2. SMC: :smcReadKeyAction ERROR: $Num kSMCKeyNotFound(0x84) fKeyHashTable=0x0
3. SMC: :smcInitHelper ERROR: MMIO regMap ==NULL - fall back to old SMC mode
4. WARNING - ACPI_SMCCtrlLoop: :initCPUCtrlLoop - no sub-config match for MacBookPro4,1 with 8 p-states, using default stepper instead
5. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key MOTP (kSMCKeyNotFound)
6. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key BEMB (kSMCKeyNotFound)
I was hoping that someone could read my log to ascertain wether or not they see a problem that stands out. I was also hoping that someone could tell me if verbose mode provides any information that may be wrong with my computer. I just hope that someone can give me some insight as to what may be wrong with my computer. If it is the hard drive I will easily replace it, but I want to make sure that is the problem first before I waste money on a hard drive or anything else. Please let me know if anyone requires any other information from me.
Thank you!
Interval Since Last Panic Report: 21959 sec
Panics Since Last Report:          1
Anonymous UUID:                    B62D9AB4-53DD-4F76-90B2-32453302297E
Sat Aug 31 15:20:06 2013
panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81d9d774, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x0000000011d06000, CR4: 0x0000000000000660
RAX: 0x0000000000000004, RBX: 0xffffff809eb71000, RCX: 0xffffff8000892604, RDX: 0xffffff80b69d3aa8
RSP: 0xffffff80b69d3bd0, RBP: 0xffffff80b69d3bd0, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000010751b4, R10: 0xfffffffffffffff4, R11: 0xffffff8000640fd4
R12: 0xffffff809eb71000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0x0000000000000010
RFL: 0x0000000000010202, RIP: 0xffffff7f81d9d774, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x0000000000000010, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80b69d3880 : 0xffffff8000220792
0xffffff80b69d3900 : 0xffffff80002c4794
0xffffff80b69d3ab0 : 0xffffff80002da55d
0xffffff80b69d3ad0 : 0xffffff7f81d9d774
0xffffff80b69d3bd0 : 0xffffff7f81d8913a
0xffffff80b69d3c20 : 0xffffff7f81d89928
0xffffff80b69d3c40 : 0xffffff7f81d5be8f
0xffffff80b69d3c70 : 0xffffff7f8087f832
0xffffff80b69d3cb0 : 0xffffff7f8087f93d
0xffffff80b69d3cd0 : 0xffffff7f8088b625
0xffffff80b69d3d40 : 0xffffff7f80889c76
0xffffff80b69d3d80 : 0xffffff80006245ca
0xffffff80b69d3dd0 : 0xffffff8000657d4e
0xffffff80b69d3e30 : 0xffffff80002a3851
0xffffff80b69d3e80 : 0xffffff8000223096
0xffffff80b69d3eb0 : 0xffffff80002148a9
0xffffff80b69d3f10 : 0xffffff800021bbd8
0xffffff80b69d3f70 : 0xffffff80002aef10
0xffffff80b69d3fb0 : 0xffffff80002daec3
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000->0xffffff7f808acfff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
         com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81d590 00->0xffffff7f81e1bfff
            dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 bf000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f808ad000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro4,1 (Mac-F42C89C8)
System uptime in nanoseconds: 62230646656
last loaded kext at 53384504695: com.apple.filesystems.autofs 3.0 (addr 0xffffff7f81efc000, size 45056)
loaded kexts:
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleHDAHardwareConfigDriver 2.2.5a5
com.apple.driver.AppleHDA 2.2.5a5
com.apple.GeForce 7.3.2
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AppleMuxControl 3.1.33
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyEventDriver 227.6
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.iokit.AppleYukon2 3.2.2b1
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AirPortBrcm43224 501.36.15
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleUSBUHCI 5.1.0
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.nvidia.nv50hal 7.3.2
com.apple.nvidia.nvGK100hal 7.3.2
com.apple.nvidia.nvGF100hal 7.3.2
com.apple.NVDAResman 7.3.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IOATAFamily 2.5.1
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro4,1, BootROM MBP41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 6 GB, SMC 1.27f3
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7F9B0000, 0x4354353132363441433636372E4D31364643
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7FBAFFFFFFFFFF, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.15)
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS543225L9SA02, 250.06 GB
Parallel ATA Device: MATSHITADVD-R   UJ-867
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0230, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2

I had already written a book and I did not want to bombard people with more information, but in my previous research I did come across the major issues with the NVIDIA card. I also was well aware that Apple offered a replacement program that ended in December of 2012. I was going to add that in my original post, but I discounted that theory because I put my faith in the so called "Apple Genius" when I made my second trip to the Apple Store. I brought the NVIDIA card issue to his attention and asked him if he thought that may be the problem, but he said no. He said if it was the NVIDIA card that the screen would be completely black and there would be no startup chime. When I experienced the screen issues I thought it was a problem with the NVIDIA card or the logic board. I asked myself, how can a flawed hard drive cause the screen to act funny.
nbar and Rick Warren, I thank you both for your help and insight; people like you are the real "Apple Geniuses." I was hoping there was a way I could wipe the hard drive before I dumped the computer or attempted to sell it. I guess I will look into purchasing a new machine when I have the funds. Again...thank you both!

I bought an iphone 4 from my friend and he do not know his apple ID and we are trying to know the email attached to is apple ID so we can rest it cause he forgot them as well and the reset button in the 2 steps always says that the email is always sent !

i bought an iphone 4 from my friend and he do not know his apple ID and we are trying to know the email attached to is apple ID so we can rest it cause he forgot them as well and the reset button in the 2 steps always says that the email is always sent ! ( even if you wrote a worng ID like ( asdasdasd ) it will say sent !! how come and now am trying to know or need a hint on that email so my freind could try to remember it !
to those who will think that this phone is stolen , no its not and i would love to go to apple store if there is 1 in jordan so they can help us ,
i have everything with this iphone the box the catalog its serial number , everything but the ID and the (and apple ID is everything as you know)
so please if anyone have any suggestion to help me , and even apple it self if the can help me to get a support from them cause i tried everything to contact them by mail or any other option since as i said there is no apple store in jordan

he knows his ID , if he did all whats in the link he can get his password back ?
how can i make him call applecare ? is there a way to speak to them from jordan ??
i have been trying to reach any1 in apple so they can communicate and help my friend (us) to make him remember it .
am not asking for the password or trying to get into the phone without using it , and i can take my money back though i need to help my friend as well since now he cant use it as well.
thanks kil

HT3302 My Ipod touch 8gb will not turn back on no matter what i do i have tried just the power button, the power button and home button, and connecting it to the computer and the battery wasn't close to being dead non of them work what do i do?

My Ipod touch 8gb will not turn back on no matter what i do i have tried just the power button, the power button and home button, and connecting it to the computer and the battery wasn't close to being dead non of them work what do i do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Grey screen with message "turn off computer with power button until switch off then press again power button"

Dear all,
I'm very hungry with my iMac and my Time Capsule :
I try for two weeks to restore my iMac without any success...
I wait 80 hours to finally have the message again and again : "to restart your computer : turn off computer with power button until switch off then press again power button".
But my iMac do not work !
Could you help me?

Hello, that's a kernel panic...
http://thexlab.com/faqs/kernelpanics.html
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X 10.6 Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond. I have tried pressing the two buttons together and briefly get the Apple logo but still can not start up, the logo disappears. I have tried connecting the iP

I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond. I have tried pressing the two buttons together and briefly get the Apple logo but still can not restart, the logo disappears. I have tried connecting to my iMac to restore the iPad but the device does not show up (I have an old iMac). What else can I do?

You need to be running Snow Leopard 10.6.8 at the very least in order to sync your iPad with iTunes so you could update your Mac, if it can be updated, and if you care to do so.
If that's not an option, you will have to find someone that can restore the device for you with their computer running iTunes or make an appointment at an Apple Store and ask them to restore the device for you.
I hope that you have an iCloud backup, because you will lose everything on the device when it is restored.
Snow Leopard can still be purchased in the U.S. Apple Online Store.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Also, I would not give up on the reset technique....holding down on the sleep and home buttons at the same time until the Apple logo appears. It takes about 10-15 seconds and sometimes just a little longer to get the logo to appear.

Mt iPhone shows unread messages that aren't there! I have held down the power and home buttons until blank screen and apple icon appear only to find it is cleared, but within minutes the unread messages reappear! Please help

Mt iPhone shows unread messages that aren't there! I have held down the power and home buttons until blank screen and apple icon appear only to find it is cleared, but within minutes the unread messages reappear! Please help

Have you restored the iphone through itunes?
You say the unread messages aren't there but then they appear?

HT204368 My iPhone 4s will not recognise my TomTom car kit, so I cannot use any of my 3 TomTom apps. It will not pair, although I have held in the reset button until it beeps, then entered my PIN when instructed.

Similar Messages

Maybe you are looking for