HT204380 after updating to 8.3 for my iPad and iPhone and OS X 10.10.3 i can not log in using my apple ID nor other emails i use for alternate verification
unable to log-in using my apple ID after updating to iOS 8.3 for my iPad Air 2, iPhone 6, Macbook Pro; to FaceTime and iMessage
When you say you changed your password was that on the gmail site and yet both your phone and pad can still send & receive with the same settings and the original password? That should not happen. If you changed your gmail password no device should be able to connect using the original password.
As to the problem with mac mail this is a very common problem. Most of the time the only fix is to completely delete the account and recreate it. But then you also need to remove the original smtp server entry as just removing the account doesn't do that.
Similar Messages
-
I updated my iphone 5 to software release 7.1.1 and have lost my facetime icon. I no longer find facetime in settings however I do find the facetime icon under "use for cellular data" but I can not locate it anywhere on the phone.
Hello ramaddern
Check out the article below to troubleshoot issues with FaceTime not showing up. Check in Settings > General > Restrictions to see if it is restricted.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Regards,
-Norm G. -
Sold my wifi iPad and reset b4 selling
New owner can't sign into his Apple ID keeps asking for old (mine) Apple ID
Thought would have erased with resetting iPadHello, your iPad is 'Activation Locked' as a part of 'Find My iPad'.
Log onto www.icloud.com, go to 'Find My iPhone'. Then select 'All Devices', your old iPad will probably show here, select 'Remove from Account'.
If there is no option to 'Remove from Account' ask the current owner to switch iPad off for a while, and remove from account should show in 5 minutes or so. -
After updating to iOS 7 for my iPhone 5, my phone is now in constant vibrate mode.
After updating to iOS 7 for my iPhone 5 last week, my sounds went away. Phone is randomly showing the ringer silent graphic without me touching the phone or putting it into this mode. The volume settings under sounds are on, notifications are all correct also, the vibrate switch on the side is NOT in the vibrate position. After pouring over threads for the past week, one suggestion fixed it for a day, but it's now reverted back to vibrate only mode! I went to settings----general-----accessibility----under hearing switched mono audio off, like I said, fixed the problem for a day, but now that no longer works! It really seems to be a bug with the software update, which the the 7.0.3 did not fix. Help, would like my phone to work normally again. Suggestions?
Hi chuckrabaw,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like the iPhone is searchiong for a network. It looks like you have already done some troubleshooting. There are a few steps listed in this article you did not mention trying, they may be able to help the issue.
If you see No Service in the status bar of your iPhone or iPad - Apple Support
Cheers,
Mario -
After updating iOS I cant open my iPad for requiring 4 digit passcode
After updating iOS I cant open my iPad for requiring 4 digit passcode which I did not make it before. Pls. tell me the solution to open the iPad.
Abontika ShahaFORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8. After updates no wireless capability for ipad or laptop, imac connects fine but nothing else. No dashboard widgets work, Skype won't work. What goes?
Your post is pretty lengthy and I have to admit I didn't read it all. Please try restarting in Safe Mode, if that doesn't work please do both a SMC and PRAM reset. These may take 2-3 attempts.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
Home sharing does not work after update to snow leopard 10.6.4 and iTunes 9
I am using home sharing since about a year without any problems. After updating to snow leopard 10.6.4 and iTunes 9.2 it suddenly does not work anymore.
On my iMac and my Mac Book Pro I get error code 3259 and it tells me to check my firewall and to enable Port 3689.
I did not change anything in the firewall settings, itunes on both allows data traffic in both directions. I also do not find any option to activate a port ( also wondering why this is suddenly now necessary)
I deactivated home sharing on both machines and enabled it again. It still does not work.
On both machines iTunes displays the the library on the left side but like said it is not accessable
With Finder I can access the other computer from both machines without any problem.
Any help to solve this would be very much appreciatedfirst of all, if you are behind a router firewall, and have your network secured (WPA2 and a long, non-dictionary password made up of letters and numbers), you don't need the software firewall on your Mac(s).
@ least turned if off for troubleshooting purposes.
turn home sharing off on both computers, and make sure
(a) both Macs have access to the internet
(b) iTunes on both machines is authorized for the same iTunes account.
turn home sharing back on on both Macs.
does it work ?
JGG -
After updating to iOS 6.1.2, neither my iPhone or iPad will update apps thru App Store. Any suggestions?
What happens when you try?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.
I had this same problem with what's app. There is a new update for the app on the app store which is compatible with ios8. Update the app, or delete it and re-add it. I found a lot of apps weren't compliant with ios8, but after updating everything worked fine.
-
after updating to iPhoto9.6 an error occurred and the iPhoto icon says it is downloading. The library seems ok
Perhaps you need to wait for the download to finish. If it's going on for a long time then cancel it (which you can do in Launchpad) and try again.
-
iPad 2 problem. After updating to IOS 8.0.2 iPad says that I need to plug into iTunes. When I do that, the only option is to restore iPad to factory settings? iPad will do nothing until then. I have never had this problem before. Help
Hi ..
Follow Apple's instructions for recovery mode here > iOS: Unable to update or restore
You can restore from a backup. -
After update 6.0.1 I am unable to conduct online banking with wifi on. I can with 3G and wifi off. Same with iPad or my iPhone 4. Any suggestions?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Anyone know of a fix after updating the last ios...ipad keeps restarting or won't stay on. Very aggravating.
Have you tried resetting your iPad? I don't have a lot of confidence that it will work for you, but it's an easy thing to try and a good place to start.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't help, you should probably restore the iOS software. You may even need to use recover mode. Both are covered in this in article.
Use iTunes to restore your iOS device to factory settings -
there is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)
Thanks for reply, but problem is diffrent I got updated my device via I tune(IPSW 5.01) before that, it was working well after upgreade 4.1 to 5.01 I am getting problem. No cydia no signal!
BTW Thank you, -
After updating to 8.1.2 my iPad continues to restart. I tried resetting all the settings and this didn't work. I tried rebooting by holding the start button & power button and it didnt work either. The problem has actually worsened. I can no longer use my iPad.
You need to restore the iPad.
Use iTunes to restore your iOS device to factory settings - Apple Support
If that will not work, you will need to use Recovery Mode to restore.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Maybe you are looking for
-
Getting stuff of my ipod onto my Windows computer, what app does this?
Hello, So I have a Mac at home and a Windows at work. I had my ipod synced to my Mac at home and it now has all the TV shows, music etc. on it. Then I switched it to sync manually thinking it would then work at work. Well I have XPlay which allows me
-
MY iPod Nano 2nd generation iPod has died on me. I've charged it both by connecting to my laptop and also separately. I press the centre wheel and menu and the apple logo appears for a few seconds, then I get a glimpse of the menu then it disappears
-
How to compress PDF file when sending email through SP01
Hi expert, i need your help. when i use tcode SP01 and fetch the spool no which i want, then select the spool no, cilick menu Spool Request->Forward->Send using SAPOffice to send mail. i can send the list as an attached file to external mailbox. Now
-
File conversion - Multiple recordsets
Dear All I am trying to convert a file in the Sender File Adapter that has more than one recordsets but I cant find the solution. The adapter gives the option of recordset numbers but how can I define them? To make it simple my file conversion result
-
Configuration of ping using SNMP rw on Cisco devices
Hello, the customer would like to use SNMP RW access for configuration of ping on Cisco devices. He wants to use ping with the following parameters: destination address, length, number of packets and with DF bit set (it is very important for our cust